Bedienungsanleitung Whirlpool WH7IA15AM3LS0 Geschirrspüler

Bedienungsanleitung

EN

Daily Reference Guide

7

PROBLEMS POSSIBLE CAUSES SOLUTIONS

The salt

indicator is lit

Salt reservoir is almost empty.

Rell the reservoir with salt (for more information - see FILLING THE SALT RESERVOIR).

Check the water hardness setting if necessary (see WATER HARDNESS TABLE).

The salt

indicator is

blinking

Salt reservoir is empty.

Rell the reservoir with salt as soon as possible. Using the appliance without salt may

cause damage to its internal components.

The rinse aid

indicator is lit

or blinking

Rinse aid dispenser is empty. (After rell the

rinse aid indicator may remain lit for a short

time).

Rell the dispenser with rinse aid (for more information - see FILLING THE RINSE AID

DISPENSER).

Descale

indicator is lit

or blinking;"dES"

alarm is displayed.

Limescale is accumulating on internal com-

ponents of the appliance.

Descale the appliance immediately using the Self Clean program and a commercially

available descaling product (see OPTIONS AND FUNCTIONS). Rell the reservoir with

salt. Check the water hardness setting. If the appliance is not descaled, it will stop

functioning.

The dishwasher

won’t start or

does not respond

to commands.

The appliance has not been plugged in

properly.

Insert the plug into the socket.

Power outage.

For safety reasons, the dishwasher will not restart automatically when power returns.

Open dishwasher door, press START/Pause button and close the door within 4 seconds.

The dishwasher door is not closed.

NaturalDry pin is not pulled in.

Vigorously push the door until you hear the “click”.

A cycle is interrupted by door opening for

more than 4 seconds.

Press START/Pause and close the door within 4 seconds.

The control panel does not respond or F6

E1 is displayed.

Switch o the appliance by pressing the ON-OFF/Reset button, switch it back on

after approximately one minute and restart the program. If the problem persists,

unplug the appliance for 1 minute, then plug it back in.

The dishwasher

won’t drain.

Display shows:

F7 E3 or F9 E1

The lter is clogged with food residues or

limescale

Clean the lter and descale the appliance (see CLEANING THE FILTER ASSEMBLY and

DESCALE INSTRUCTION).

The drain hose is kinked. Check the drain hose (see INSTALLATION INSTRUCTION).

The sink drain pipe is blocked. Clean the sink drain pipe.

The dishwasher

makes excessive

noise.

Dishes are rattling against each other. Position the crockery correctly (see LOADING THE RACKS).

An excessive amount of foam is present.

The detergent has not been measured out correctly or it is not suitable for use in

dishwashers (see FILLING THE DETERGENT DISPENSER). Restart the current cycle by

switching OFF the dishwasher, then switch it on again, select a new program, press

START/Pause and close the door within 4 seconds. Please do not add any detergent.

Crockery has not been arranged properly. Arrange the crockery correctly (see LOADING THE RACKS).

The lter is clogged with food residues or

limescale.

Clean the lter assembly (see CARE AND MAINTENANCE).

The dishes are not

clean.

Crockery has not been arranged properly. Arrange the crockery correctly (see LOADING THE RACKS).

Spray arms cannot rotate freely, being

hindered by the dishes.

Arrange the crockery correctly (see LOADING THE RACKS). Check that the upper rack is

in the correct position and adjust (lift up) if necessary.

The wash cycle is too gentle. Select an appropriate wash cycle (see PROGRAMS TABLE).

An excessive amount of foam is present.

The detergent has not been measured out correctly or it is not suitable for use in

dishwashers (see FILLING THE DETERGENT DISPENSER).

The cap on the rinse aid compartment has

not been closed correctly.

Make sure the cap of the rinse aid dispenser is closed.

The lter is clogged with food residues or

limescale.

Clean the lter and descale the appliance (see CLEANING THE FILTER ASSEMBLY).

The salt reservoir is empty. Fill the salt reservoir (see FILLING THE SALT RESERVOIR).

The dishwasher

does not ll the

water.

The display

shows: H2O and

is lit; acoustic

alarm sounds.

No water in the water supply or the tap is

closed.

Make sure there is water in the water supply and the water tap is open.

The water inlet hose is kinked.

Check the inlet hose (see INSTALLATION). Open dishwasher door, press START/Pause

button and close the door within 4 seconds.

The screen in the water inlet hose is

clogged; it is necessary to clean it.

Check and clean the screen in the water inlet hose. Open dishwasher door, press

START/Pause button and close the door within 4 seconds.

The dishwasher

nishes the cycle

prematurely.

The display

shows: F8 E3

The lter is clogged with food residues or

limescale.

Clean the lter and descale the appliance (see CLEANING THE FILTER ASSEMBLY and

DESCALE INSTRUCTION).

Drain hose positioned too low or siphoning

into the home sewage system.

Check if the end of the drain hose is placed at the correct height (see INSTALLATION).

Check for siphoning into the home sewage system, and install a siphon breaker/air

admittance valve if necessary.

An excessive amount of foam is present.

The detergent has not been measured out correctly or it is not suitable for use in

dishwashers (see FILLING THE DETERGENT DISPENSER).

Air in the water supply. Check water supply for leaks or other issues letting air inside.

TROUBLESHOOTING

In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list. For other errors or is-

sues please contact authorized After-sales Service whose contact details can be found in the warranty booklet. Spare parts will be available

for aperiod of either up to 7 or up to 10 years, according to the specic Regulation requirements.

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Whirlpool WH7IA15AM3LS0 Geschirrspüler zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Whirlpool zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Whirlpool WH7IA15AM3LS0 Geschirrspüler in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Whirlpool Geschirrspüler
Weitere Anleitungen von Geschirrspüler

Häufig gestellte Fragen zu Whirlpool WH7IA15AM3LS0 Geschirrspüler

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Whirlpool W3F D634 X Geschirrspüler

Bedienungsanleitung

Whirlpool W3F D634 Geschirrspüler

Bedienungsanleitung

Whirlpool WP 209 FD Geschirrspüler

Bedienungsanleitung

Whirlpool W0I D751A X Geschirrspüler

Bedienungsanleitung

Whirlpool W7U HP43 X Geschirrspüler

Bedienungsanleitung

Whirlpool WSFC 3M17 X Geschirrspüler

Bedienungsanleitung

Whirlpool WH2IC10BS7LA0 Geschirrspüler

Bedienungsanleitung

Whirlpool WIO 3T133 PLE Geschirrspüler

Verwandte Kategorien