Bedienungsanleitung EMOS E0352 Wetterstation

Bedienungsanleitung

4

2. Place the two units next to each other. After placing batteries into the station, the station au-

tomatically starts searching for DCF77 signal (hereinafter referred to as DCF); the

icon will

be ashing. No other data on the display will be updated and all buttons will be disabled during

the search. Long pressing the

button cancels the search for DCF signal prematurely and the

station automatically loads the temperature and humidity readings from the sensor. The weather

station will detect the remote sensor signal within 3 minutes. If signal from the sensor is not

detected, repeat the process from step 1.

3. If the outdoor temperature reading disappears from the display, long press the CH button on the

station. The station will start searching for the sensor signal.

4. We recommend placing the sensor on the north side of the house. The range of the sensor

may decrease substantially in areas with a large number of obstacles. The sensor is resistant

to dripping water; however, it should not be exposed to sustained rain. Do not place the sensor

on metal objects as these would reduce transmission range. Use the sensor in vertical position

only. If the weather station display shows the low battery icon in the outdoor humidity eld,

replace the batteries in the sensor.

Note: It may take up to 30 minutes since the insertion of batteries into the units before the station

begins showing the correct measured data and loads DCF time.

Changing Sensor Channel and Connecting Additional Sensors

The station can be paired with up to 3 wireless sensors.

1. Choose the desired channel – 1, 2, or 3 – for the sensor by repeatedly pressing the CH button

on the station.

2. The number will be displayed in eld no. 1

.

3. Then, long press the CH button; the

icon will start ashing.

4. Remove the battery cover on the back of the sensor and move the slider to the sensor channel

of choice (1, 2, 3).

5. Insert batteries (2× 1.5 V AA) into the sensor. Data from the sensor will be loaded into the

station within 3 minutes.

6. If the sensor signal is not detected, remove the batteries and reinsert them.

Displaying Data from Multiple Sensors, Automatic Cycling through Values from

Connected Sensors

Press the CH button repeatedly to display data from all connected sensors one by one. You can also

activate automatic cycling through data from all connected sensors:

1. Turning on cycle mode

Repeatedly press the CH button until the display shows an arrow icon with sensor number . Data

from all connected sensors will be shown automatically and repeatedly on the station‘s display one

after another.

2. Turning o cycle mode

Press the CH button; the arrow icon will disappear.

Radio-Controlled Clock (DCF77)

After placing batteries into the station, the station automatically starts searching for DCF77 signal

(hereinafter referred to as DCF); the icon will be ashing.

No other data on the display will be updated and all buttons will be disabled during the search.

Long pressing the button cancels the search for DCF signal prematurely and the station automat-

ically loads the temperature and humidity readings from the sensor.

DCF signal detected – the

icon stops ashing and the current time and date will be displayed

along with a

icon.

DCF signal not detected – DCF icon will not be displayed.

To repeat the search for DCF signal (3–8 minutes), long press the

button; to cancel the search for

DCF signal long press the

button again. DCF signal will be continuously synchronised every day.

During daylight saving time, the

icon will be displayed next to the DCF icon.

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr EMOS E0352 Wetterstation zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, EMOS zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres EMOS E0352 Wetterstation in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für EMOS Wetterstationen
Weitere Anleitungen von Wetterstationen

Häufig gestellte Fragen zu EMOS E0352 Wetterstation

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

EMOS E5005 Wetterstation

Bedienungsanleitung

EMOS E8737 Wetterstation

Bedienungsanleitung

EMOS E3003 Wetterstation

Bedienungsanleitung

EMOS E8825 Wetterstation

Bedienungsanleitung

EMOS E6018 Wetterstation

Bedienungsanleitung

EMOS E0300 Wetterstation

Bedienungsanleitung

EMOS E5201 Wetterstation

Bedienungsanleitung

EMOS E6016 Wetterstation

Verwandte Kategorien