Bedienungsanleitung Makita DP4003 Bohrschrauber

Bedienungsanleitung

Reversing switch action (Fig. 4)

CAUTION:

•

Always check the direction of rotation before opera-

tion.

•

Use the reversing switch only after the tool comes to

a complete stop. Changing the direction of rotation

before the tool stops may damage the tool.

This tool has a reversing switch to change the direc-

tion of rotation. Move the reversing switch lever to the

position (A side) for clockwise rotation or the

position (B side) for counterclockwise rotation.

Side grip (auxiliary handle) (Fig. 5)

Always use the side grip to ensure operating safety.

Install the side grip so that the teeth on the grip fit in

between the protrusions on the tool barrel. Then

tighten the grip by turning clockwise at the desired

position. It may be swung 360° so as to be secured at

any position.

Depth gauge (optional accessory) (Fig. 6)

The depth gauge is convenient for drilling holes of

uniform depth. Loosen the side grip and insert the

depth gauge into the hole in the side grip. Adjust the

depth gauge to the desired depth and tighten the side

grip.

NOTE:

The depth gauge cannot be used at the position

where the depth gauge strikes against the gear

housing.

Drilling operation

•

Drilling in wood

When drilling in wood, the best results are obtained

with wood drills equipped with a guide screw. The

guide screw makes drilling easier by pulling the bit

into the workpiece.

•

Drilling in metal

To prevent the bit from slipping when starting a hole,

make an indentation with a center-punch and ham-

mer at the point to be drilled. Place the point of the

bit in the indentation and start drilling.

Use a cutting lubricant when drilling metals. The

exceptions are iron and brass which should be drilled

dry.

Holding tool (Fig.7&8)

When drilling a large hole with a hole saw, etc., the

side grip (auxiliary handle) should be used as a brace

to maintain safe control of the tool.

CAUTION:

•

Pressing excessively on the tool will not speed up

the drilling. In fact, this excessive pressure will only

serve to damage the tip of your bit, decrease the

tool performance and shorten the service life of the

tool.

•

There is a tremendous force exerted on the tool/bit

at the time of hole breakthrough. Hold the tool firmly

and exert care when the bit begins to break through

the workpiece.

•

A stuck bit can be removed simply by setting the

reversing switch to reverse rotation in order to back

out. However, the tool may back out abruptly if you

do not hold it firmly.

•

Always secure small workpieces in a vise or similar

hold-down device.

Hook (Fig.9&10)

When using the hook, pull it out in ‘‘A’’ direction and

then push it in ‘‘B’’ direction to secure in place. When

not using the hook, return it back to its initial position

by following the above procedures in reverse.

MAINTENANCE

CAUTION:

Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

To maintain product safety and reliability, repairs,

maintenance or adjustment should be carried out by a

Makita Authorized Service Center.

6

DP3002/DP3003 (E) (’100. 4. 17)

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Makita DP4003 Bohrschrauber zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Makita zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Makita DP4003 Bohrschrauber in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Makita Bohrschrauber
Weitere Anleitungen von Bohrschrauber

Häufig gestellte Fragen zu Makita DP4003 Bohrschrauber

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Makita DHP492 Bohrschrauber

Bedienungsanleitung

Makita M6000 Bohrschrauber

Bedienungsanleitung

Makita DF457DWE Bohrschrauber

Bedienungsanleitung

Makita DDF451 Bohrschrauber

Bedienungsanleitung

Makita DHP483 Bohrschrauber

Bedienungsanleitung

Makita DDF482 Bohrschrauber

Bedienungsanleitung

Makita DDA351 Bohrschrauber

Bedienungsanleitung

Makita DA3000R Bohrschrauber

Verwandte Kategorien