Bedienungsanleitung Makita DP4003 Bohrschrauber

Bedienungsanleitung

ENGLISH

Explanation of general view

1 Tighten

2 Chuck key

3 Sleeve

4 Ring

5 Switch trigger

6 Lock lever

7 Reversing switch lever

8 Side grip

9 Protrusions

10 Teeth

11 Loosen

12 Depth gauge

13 Reaction

14 Reverse

15 Forward

16 Holding against a stud.

17 Holding against a floor.

18 Hook

SPECIFICATIONS

Model DP3002 DP3003 DP4000 DP4001 DP4002 DP4003

Capacities

Steel .................................... 10 mm 10 mm 13 mm 13 mm 13 mm 13 mm

Wood ................................... 32 mm 32 mm 38 mm 38 mm 38 mm 38 mm

No load speed (min

–1

) ........... 0 – 1,200 0 – 1,200 0 – 900 0 – 900 0 – 600 0 – 600

Overall length ......................... 304 mm 296 mm 304 mm 308 mm 304 mm 308 mm

Net weight .............................. 2.0 kg 1.8 kg 2.2 kg 2.0 kg 2.2 kg 2.0 kg

•

Due to our continuing program of research and

development, the specifications herein are subject

to change without notice.

•

Note: Specifications may differ from country to

country.

Power supply

The tool should be connected only to a power

supply of the same voltage as indicated on the

nameplate, and can only be operated on single-phase

AC supply. They are double-insulated in accordance

with European Standard and can, therefore, also be

used from sockets without earth wire.

Safety hints

For your own safety, please refer to the enclosed

safety instructions.

ADDITIONAL SAFETY RULES

ENB001-1

1. Hold tool by insulated gripping surfaces when

performing an operation where the cutting

tools may contact hidden wiring or its own

cord. Contact with a ‘‘live’’ wire will make

exposed metal parts of the tool ‘‘live’’ and

shock the operator.

2. Always be sure you have a firm footing. Be

sure no one is below when using the tool in

high locations.

3. Hold the tool firmly.

4. Keep hands away from rotating parts.

5. Do not leave the tool running. Operate the tool

only when hand-held.

6. Do not touch the drill bit or the workpiece

immediately after operation; they may be

extremely hot and could burn your skin.

SAVE THESE INSTRUCTIONS.

OPERATING INSTRUCTIONS

Important:

Always be sure that the tool is switched off and

unplugged before installing or removing the side grip,

bit or other accessories.

Installing or removing drill bit

For DP3002, DP4000, DP4002 (Fig. 1)

To install the bit, place it in the chuck as far as it will

go.

Tighten the chuck by hand. Place the chuck key in

each of the three holes and tighten clockwise. Be sure

to tighten all three chuck holes evenly.

To remove the bit, turn the chuck key counterclock-

wise in just one hole, then loosen the chuck by hand.

After using the chuck key, be sure to return it to the

original position.

For DP3003, DP4001, DP4003 (Fig. 2)

Hold the ring and turn the sleeve counterclockwise to

open the chuck jaws. Place the bit in the chuck as far

as it will go. Hold the ring firmly and turn the sleeve

clockwise to tighten the chuck. To remove the bit, hold

the ring and turn the sleeve counterclockwise.

Switch action (Fig. 3)

CAUTION:

Before plugging in the tool, always check to see that

the switch trigger actuates properly and returns to the

‘‘OFF’’ position when released.

To start the tool, simply pull the trigger. Tool speed is

increased by increasing pressure on the trigger.

Release the trigger to stop.

For continuous operation, pull the trigger and then

push the lock lever upward. To stop the tool from the

locked position, pull the trigger fully, then release it.

DP3002/DP3003 (E) (’100. 4. 17)

5

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Makita DP4003 Bohrschrauber zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Makita zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Makita DP4003 Bohrschrauber in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Makita Bohrschrauber
Weitere Anleitungen von Bohrschrauber

Häufig gestellte Fragen zu Makita DP4003 Bohrschrauber

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Makita DHP492 Bohrschrauber

Bedienungsanleitung

Makita M6000 Bohrschrauber

Bedienungsanleitung

Makita DF457DWE Bohrschrauber

Bedienungsanleitung

Makita DDF451 Bohrschrauber

Bedienungsanleitung

Makita DHP483 Bohrschrauber

Bedienungsanleitung

Makita DDF482 Bohrschrauber

Bedienungsanleitung

Makita DDA351 Bohrschrauber

Bedienungsanleitung

Makita DA3000R Bohrschrauber

Verwandte Kategorien