Bedienungsanleitung Makita 9910 Bandschleifer

Bedienungsanleitung

5

Sanding operation (Fig.6)

CAUTION:

When sanding drywalls, connect the tool Makita vacuum

cleaner.

Hold the tool firmly with both hands. Turn the tool on and

wait until it attains full speed. Then gently place the tool

on the workpiece surface. Keep the belt flush with the

workpiece at all times and move the tool back and forth.

Never force the tool. The weight of the tool applies ade-

quate pressure. Excessive pressure may cause stalling,

overheating of the motor, burning of the workpiece and

possible kickback.

Speed adjusting dial (Fig.7)

For 9911 only

The belt speed can be infinitely adjusted between 75m

and 270 m per minute by turning the speed adjusting dial

to a given number setting from 1 to 6. Higher speed is

obtained when the dial is turned in the direction of num-

ber 6; lower speed is obtained when it is turned in the

direction of number 1. Select the proper speed for the

workpiece to be sanded.

CAUTION:

The speed adjusting dial can be turned only as far as 6

and back to 1. Do not force it past 6 or 1, or the speed

adjusting function may no longer work.

Clamps (optional accessory) (Fig.8)

This tool can be operated in the inverted position. To do so, secure the tool to a stable workbench with two clamps as

shown in Fig.8.

Connecting to Makita vacuum cleaner or dust collector

Cleaner sanding operations can be performed by connecting the belt sander to Makita vacuum cleaner or dust collec-

tor.

When connecting to Makita vacuum cleaner (Model 406/431), an optional hose 28mm in inner diameter is necessary.

See the figure below.

When connecting to Makita dust collector (Model 420), the optional hose is not necessary. You can connect the belt

sander directly to the hose of the dust collector.

MAINTENANCE

CAUTION:

Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

Replacement of carbon brushes (Fig.9,10&11)

Replace carbon brushes when they are worn down to the

limit mark. First, remove the belt cover from the tool, then

replace the carbon brushes. Both identical carbon

brushes should be replaced at the same time.

To maintain product safety and reliability, repairs, mainte-

nance or adjustment should be carried out by a Makita

Authorized Service Center.

ACCESSORIES

CAUTION:

These accessories or attachments are recommended for

use with your Makita tool specified in this manual. The

use of any other accessories or attachments might

present a risk of injury to persons. Only use accessory or

attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita service center.

• Dust bag

• Clamp

• Abrasive belt

• Hose 28 mm in inner diameter

Makita vacuum cleaner

+

+

Hose of vacuum cleaner Optional hose 28 mm in inner dia.

Grit (AA) 40 60 80 100 150 180 240

Use Coarse Medium Fine

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Makita 9910 Bandschleifer zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Makita zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Makita 9910 Bandschleifer in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Makita Bandschleifer
Weitere Anleitungen von Bandschleifer

Häufig gestellte Fragen zu Makita 9910 Bandschleifer

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Makita 9901 Bandschleifer

Bedienungsanleitung

Makita 9921 Bandschleifer

Bedienungsanleitung

Makita 9032 Bandschleifer

Bedienungsanleitung

Makita 9403 Bandschleifer

Bedienungsanleitung

Makita 9924DB Bandschleifer

Bedienungsanleitung

Makita 9401 Bandschleifer

Bedienungsanleitung

Makita 9903 Bandschleifer

Bedienungsanleitung

Makita 9404 Bandschleifer

Verwandte Kategorien