Bedienungsanleitung Makita 9910 Bandschleifer

Bedienungsanleitung

4

ENGLISH

Explanation of general view

1Lever

2 Steel plate

3 Adjusting screw

4 Dust bag

5 Dust spout

6 Lock button

7 Switch trigger

8 Speed adjusting dial

9 Clamps

10 Limit mark

11 Belt cover

12 Screwdriver

13 Brush holder cap

SPECIFICATIONS

Model 9910 9911

Belt size .......................................................................................76mm x457mm 76mm x457mm

Belt speed ....................................................................................270m/min. 75m –270m/min.

Overall length ..............................................................................262 mm 262mm

Net weight ....................................................................................2.6kg 2.6kg

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

Safety hints

For your own safety, please refer to enclosed safety

instructions.

SPECIFIC SAFETY RULES

GEB015-1

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to belt sander safety rules. If you use this tool

unsafely or incorrectly, you can suffer serious per-

sonal injury.

1. Hold power tools by insulated gripping surfaces

when performing an operation where the cutting

tool may contact hidden wiring or its own cord.

Contact with a “live” wire will make exposed metal

parts of the tool “live” and shock the operator.

2. Ventilate your work area adequately when you

perform sanding operations.

3. Some material contains chemicals which may be

toxic. Take caution to prevent working dust inha-

lation and skin contact. Follow material supplier

safety data.

4. Always use the correct dust mask/respirator for

the material and application you are working

with.

5. Always use safety glasses or goggles. Ordinary

eye or sun glasses are NOT safety glasses.

6. Hold the tool firmly with both hands.

7. Make sure the belt is not contacting the work8

piece before the switch is turned on.

8. Keep hands away from rotating parts.

9. Do not leave the tool running. Operate the tool

only when hand-held.

10. This tool has not been waterproofed, so do not

use water on the workpiece surface.

SAVE THESE INSTRUCTIONS.

WARNING:

MISUSE or failure to follow the safety rules stated in

this instruction manual may cause serious personal

injury.

OPERATING INSTRUCTIONS

Installing or removing abrasive belt (Fig.1)

Important:

Always be sure that the tool is switched off and

unplugged before installing or removing the belt.

Pull the lever all the way out and install the belt over the

rollers, then return the lever to the original position.

CAUTION:

When installing the belt, make sure that the direction of

the arrow on the back of the belt corresponds to the one

on the tool itself. (Fig.2)

Adjusting belt tracking (Fig.3)

Switch on the tool and make sure that the belt is aligned

properly. If the edge of the belt extends beyond the edge

of the steel plate or the edge of the belt retracts more

than 8mm away from the edge of the steel plate, use the

adjusting screw to adjust the belt tracking.

Dust bag (Fig.4)

Attach the dust bag onto the dust spout. The dust spout

is tapered. When attaching the dust bag, push it onto the

dust spout firmly as far as it will go to prevent it from com-

ing off during operation. For the best results, empty the

dust bag when it becomes about half full, tapping it lightly

to remove as much dust as possible.

Switch action (Fig.5)

CAUTION:

• Before plugging in the tool, always check to see that

the switch trigger actuates properly and returns to the

“OFF” position when released.

• The tool should not be in contact with the workpiece

surface when you turn the tool on or off. Otherwise a

poor sanding finish or damage of the belt may result.

To start the tool, simply pull the trigger. Release the trig-

ger to stop. For continuous operation, pull the trigger and

then push in the lock button. To stop the tool from the

locked position, pull the trigger fully, then release it.

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Makita 9910 Bandschleifer zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Makita zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Makita 9910 Bandschleifer in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Makita Bandschleifer
Weitere Anleitungen von Bandschleifer

Häufig gestellte Fragen zu Makita 9910 Bandschleifer

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Makita 9901 Bandschleifer

Bedienungsanleitung

Makita 9921 Bandschleifer

Bedienungsanleitung

Makita 9032 Bandschleifer

Bedienungsanleitung

Makita 9403 Bandschleifer

Bedienungsanleitung

Makita 9924DB Bandschleifer

Bedienungsanleitung

Makita 9401 Bandschleifer

Bedienungsanleitung

Makita 9903 Bandschleifer

Bedienungsanleitung

Makita 9404 Bandschleifer

Verwandte Kategorien