Bedienungsanleitung Kity MTC355 Trennsäge

Bedienungsanleitung

■ FURTHER SAFETY INSTRUCTIONS

Read all instructions before using this product!

Work Area

To Avoid risk of personal injury, equipment

damage, re and shock make sure your Work

Area is:

• Free of damp, wet or rainy conditions

• Free of ammable gasses or liquids

• Childproof – use padiocks and master swit-

ches when not in use

• Clean and uncluttered

• Well ventilated and well lit

The Operator

Common sense and caution are Factors which

cannot be built into any Product. These factors

must be supplied by the Operator. Please

Remember:

Prevent body contact with grounded surfaces

such as pipes or radiators.

Stay alert. Never operate equipment if you are

tired.

Do not operate the product of under the inu-

ence of alcohol or drugs. Read warning labels

on prescriptions to determine if your judge-

ment / reexes might be impaired.

Do not wear loose clothing or jewelry as they

can be caught in moving parts.

Non – skid footwear is recommended.

Wear restrictive hair covering to contain long

hair.

Use eye and ear protection. Always wear:

• ANSI – approved dust mask or respirator

when working around metal, wood, and

chemical dusts and mists.

• A full face shield if you are producing metal

lings.

• Ear protectors

Maintain proper footing and balance at all

times.

Do not reach over or across running machi-

nes.

Intended use m

The machine corresponds with the valid EC

guideline.

• Before starting work, all guards and safety

devices must be tted to the machine.

• The machine has been designed to be

operated by one person. Within the working

area, the operator is responsible with regard

to third persons.

• All safety and danger warnings attached to

the machine must be observed.

• All safety and danger warnings attached to

the machine must be kept in complete and

legible condition.

• With the tools and accessories offered, the

machine has been conceived for steel and

nonferrous metals only.

• The maximum and minimum dimensions

of the used workpieces should not be

exceeded.

• Only use machines which are free from

defects. Keep safety precautions and

possible hazards in mind. Use only accor-

ding to instructions. Fully eliminate (or have

eliminated) any defects which can lead to

reduced safety.

• The safety, work and maintenance instruc-

tions of the manufacturer as well as the

technical data given in the calibrations and

dimensions must be adhered to.

• Relevant accident prevention regulations and

other, generally recognized safety-technical

rules must also be adhered to.

• The machine may only be used, maintained

and operated by persons familiar with it and

instructed in its operation and procedures.

Arbitrary alterations to the machine release

the manufacturer from all responsibility for

any resulting damage.

• The machine may only be used with original

accessories and original tools from the

manufacturer.

• Any other use exceeds authorization. The

manufacturer is not responsible for any

damages resulting from unauthorized use;

risk is the sole responsibility of the operator.

Residual risks m

• The machine has been built using modern

technology in accordance with recognized

safety rules. Some hazards, however, may

still exist.

• Injuries on ngers and hands caused by the

running tool in case of incorrect guiding of

the work piece.

• Health hazards through steel chips. It is

imperative to wear personal protective gear

like goggles.

• Injuries through defective cutting off wheel.

Regularly check the cutting off wheel for any

defects.

• Health hazards for ngers and hands when

changing the cutting off wheel. Wear proper

working gloves.

• Health hazards when switching on the ma-

chine through the starting cutting off wheel.

• Risks through electric current if defective

electric connection cables are used.

• Health hazards through the running cutting

off wheel with long hair and loose clothing.

Wear personal protective gear like a hair net

und closely tting clothes.

• Even when all safety measures are taken,

some remaining hazards which are not yet

evident may still be present.

• Remaining hazards can be minimized by

following the instructions in „Safety pre-

cautions„, „Proper use„, and in the entire

operating manual

Installation

Prepare the workplace where you intend

to place the electrical power tool. Provide

enough space to ensure safe and trouble-

free operation. The power tool is designed

for working in enclosed rooms and has to be

installed on level and rm ground.

Equipment Fig. 1

1. Machine head

2. Thermal circuit breaker

3. On/off switch

4. Handle

5. Guard, xed

6. Guard, exible

7. Saw shaft lock

8. Cutting wheel

9. Clamping jaw, exible

10. Quick clamping lever

11. Clamping handle

12. Allen key (8 mm) (cut-off wheels repla-

cement)

13. Clamping jaw, xed

14. Fastening bolt (transport)

Commissioning

• Know the machine. Learn its applications

and limitations, as well as the specic

potential hazards.

• Check for damage if part of the machine is

damaged, it should be carefully inspected

to ensure that it can perform its intended

function correctly. If in doubt, the part should

be replaced.

• Be sure the switch is OFF before plugging In.

• Make sure tool has been cleaned and

properly lubricated.

• Check for damaged parts. Before using any

GB

13

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Kity MTC355 Trennsäge zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Kity zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Kity MTC355 Trennsäge in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Kity Trennsägen
Weitere Anleitungen von Trennsägen

Häufig gestellte Fragen zu Kity MTC355 Trennsäge

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Bosch GCO 20-14 Trennsäge

Bedienungsanleitung

Scheppach MT355s Trennsäge

Bedienungsanleitung

Parkside IAN 373210 Trennsäge

Bedienungsanleitung

Vonroc CS505AC Trennsäge

Bedienungsanleitung

Redstone MT100 Trennsäge

Bedienungsanleitung

Einhell TC-MC 355/1 Trennsäge

Bedienungsanleitung

Parkside IAN 327368 Trennsäge

Bedienungsanleitung

Parkside IAN 345868 Trennsäge

Verwandte Kategorien