Adjusting the strap with buckleWatertightness to DIN 8310Watch care and precautionsWarranty
Open the buckle and pull the strap (in the
direction of the arrow shown) until the ad-
justment pin appears.
When the position is correct for your wrist,
place the adjustment pin in the desired hole.
Pull the adjustment pin into the buckle (by
pulling the strap in the direction of the ar-
row shown) until pin clicks into place
Slide extra strap through the loop keeper
before snapping the clasp together.
•
The exactness of a (mechanical) automatic watch is naturally not
comparable with a quartz watch. Low divergences (+/- 30 sec./
day), are normally just with differences in temperature. To ob-
tain these low divergences, you must completely winding the
watch by hand before you wearing it!
•
Push buttons only easily and slowly. Importantly no strong and
quick pushes!
•
No calendar settings between 18:00 and 6:00 o‘clock, to avoid
damages of the calendar mechanism! At non-observance it can
lead to gearwheel break or similar damages.
•
Some watches have screwed up crowns which have to be released
anticlockwise.
•
The buttons and crowns of XXL watches are screwed up by caps
which have to be unscrewed anticlockwise.
•
Avoid strong percussions (e.g. drop down or bang).
•
Avoid strong electric fi elds or static electricity which could harm
your watch machanics.
•
Keep your watch clean. Use a damp and soft cloth for cleaning
your watch. Never dive your watch under water.
•
We recommend having your watch checked once every year to ensure
long use and trouble free operation.
Please, note that the information of the watertightness counts to the new
state of the watch and is to DIN 8310 no remaining quality, because the
built-in sealing elements decrease in their function and in the everyday
use. Therefore, you avoid in general contact with water. It should be che-
cked yearly and in particular before special strains.
•
Weak spots with waterproofed watches are a watch glass, crown, case
back or even construction of the case.
•
Avoid using soap or other chemicals wich could damage thick elements
of your watch.
•
Don’t push buttons if the watch is wet.
•
The crown should be always put on the normal position in the water.
The screwed crown should be drawn.
•
Please, note that for a short time high air compression can originate
from a impetuous swimming moving or jumping in the water.
•
Should water or condensation appear in the watch face, have the watch
checked immediate. The water can lead to corrosion of the components.
We guarantee the watch described on the enclosed certifi cate for two
years. The guarantee is valid from the date of purchase, provided that
your watch was sold by an authorized dealer and that the certifi cate of
guarantee was completed properly. This guarantee covers all defects
due to defective materials or manufacturing. During this period,
regulations, adjustments, repairs or the replacement of parts or the
movement will be carried out free of charge, except when the damage
has been caused by accidents or as a result of the intervention of un-
authorized persons. This guarantee does not cover the leather strap,
the glass or battery of normal wear. In the event of a claim under the
guarantee, send the watch together with a valid guarantee certifi cate,
to the authorized dealer from whom the watch was purchased.
model #:
date of
purchase :
stamp:
Instructions
Calibre Miyota OS20
www.carucci.de carucci.watches
www.carucci.de carucci.watches
indication Instructions
Washing, Rain
Showering bathing Swimming
free diving without
equipment
no indication
no no no no no
3 ATM
yes no no no no
5 ATM
yes no yes no no
10 ATM
yes yes yes yes no
20 ATM
yes yes yes yes yes
Calibre Miyota OS20
Setting the time: Pull the crown out to the 2nd position and turn the crown to set
hour and minute hands. When the crown is pushed back to the normal position, small
second hand begins to run.
Setting the date: Pull the crown out to the 1st position and turn the crown counter-
clockwise to set the date. *If the date is set between the hours of around 9:00 PM and 1:00
AM, the date may not change on the following day. After the date has been set, push the
crown back to the normal position.
Using the Chronograph: This chronograph is able to measure and display time in
1/1 second united up to maxinum of 11 hours 59 minutes 59 seconds.The chronograph
second hand keeps continuously for 11 hours 59 minutes 59 seconds after starting.
Measuring time with the chronograph1. The chronograph can be started and stopped
each time button „A“ is pressed.2. Pressing button „B“ resets the chronograph and the
chronograph second hand, chronograph minute hand, and chronograph hour hand re-
turn to zero position.
Chronograph reset (inkl. after replacing battery) This procedure shoud be per-
formed when the chronograph second hand does not return to zero position after the
chronograph has been reset, and including after the battery has been replaced. Pull the
crown out to the 2nd position. Then press button „A“ to set the chronograph second
hand to the zero position. The chronograph hand can advanced rapidly by continuously
pressing button „A“. Once the hand have been zeroed, return the crown to the normal
position.* Do not push crown to normal position while the chronograph second hand
returns to zero position.It stops on the way when crown are returned to normal position
and its position is recognized as zero position.
hour hand
1.
minute hand
date indicatorsecond indicator
2.1. 2.
minute indicator
Button A
Button B
24h indicator
Stundenzeiger
1.
Minutenzeiger
Datumsanzeige
kleine Sekundenzeiger
2.1. 2.
Minutenanzeige
Drücker A
Drücker B
24 Stunden-
anzeige
Diskutieren Sie über dieses Produkt mit
Hier können Sie uns Ihre Meinung zu Carucci Miyota OS20 Uhrwerk mitteilen. Wenn Sie eine Frage haben, lesen Sie zunächst das Bedienungsanleitung sorgfältig durch. Die Anforderung eines Bedienungsanleitung kann über unser Kontaktformular erfolgen.