Bedienungsanleitung Beretta Ciao Green 25 RSI Zentralheizungskessel

Bedienungsanleitung

5

ENGLISH

INSTALLATION MANUAL

EN

ENGLISH

1 - WARNINGS AND SAFETY

The boilers produced in our plants are built with great attention to

detail and every component is checked in order to protect users

and installers from injury. After working on the product, qualied

personnel must check the electrical wiring, in particular the stripped

part of conductors, which must not stick out from the terminal board,

avoiding possible contact with live parts of said conductor.

This instruction manual, together with the user manual, are integral

parts of the product: make sure it remains with the appliance, even

if it is transferred to another owner or user, or moved to another

heating system. In case of loss or damage, please contact your local

Technical Assistance Service for a new copy.

Boiler installation and any other assistance and maintenance opera-

tions must be carried out by qualied personnel according to the

provisions of the legislation in force.

The installer must instruct the user about the operation of the appli-

ance and about essential safety regulations.

This boiler must only be used for the application it was designed for.

The manufacturer declines all contractual and non-contractual liability

for injury to persons or animals or damage to property deriving from

errors made during installation, adjustment and maintenance and

from improper use.

After removing the packaging, make sure the contents are in good

condition and complete. Otherwise, contact the dealer from whom

you purchased the appliance.

When the product reaches the end of its life it should not be disposed

of as solid urban waste but should be brought to a separated waste

collection facility.

The safety valve outlet must be connected to a suitable collection

and venting system. The manufacturer declines all liability for any

damage caused due to any operation carried out on the safety valve.

Dispose of all the packaging materials in the suitable containers at

the corresponding collection centres.

Dispose of waste by being careful not to harm human health and without

employing procedures or methods which may damage the environment.

During installation, inform the user to:

- in the event of water leaks, the water supply must be shut off and

the Technical Assistance Service must be contacted immediately.

- it is necessary to periodically check that the operating pressure of

the hydraulic system is above 1 bar. If necessary, reset the pres-

sure as indicated in the paragraph entitled “Filling the system”

- if the boiler is not used for a long time, the following operations are

recommended:

- turn the main switch of the appliance and the main switch of the

system to the “off” position

- close the fuel and water taps of the heating system

- drain the heating system to prevent freezing.

For safety, always remember that:

the boiler should not be used by children or unassisted disabled

people

it is dangerous to activate electrical devices or appliances (such as

switches, home appliances, etc.) if you smell gas or fumes. In the

event of gas leaks, ventilate the room opening doors and windows;

close the main gas tap; contact the Technical Assistance Service or

professionally qualied personnel immediately

do not touch the boiler while barefoot, or if parts of your body are

wet or damp

before any cleaning operations, disconnect the boiler from the mains

power supply by turning the two-position system switch and the main

control panel switch to the “OFF” position

do not modify safety and adjustment devices without the manufac-

turer’s permission and relative instructions

do not pull, disconnect or twist the electric cables coming out of the

boiler, even when it is disconnected from the mains power supply

avoid covering or reducing the size of the ventilation openings in the

installation room

do not leave inammable containers and substances in the installa-

tion room

keep packaging materials out of the reach of children

it is forbidden to obstruct the condensate drainage point.

2 - DESCRIPTION

Ciao Green R.S.I. is a Type C wall-mounted condensing boiler capable

of operating under different conditions through a series of jumpers on the

electronic board (as described in “Conguring the boiler”):

MODE A

heating only without any external storage tank connected.

The boiler does not supply domestic hot water.

MODE B

heating only with a thermostatically controlled external storage tank con-

nected: in this condition, with every heat request from the storage tank ther-

mostat, the boiler supplies hot water for the preparation of the domestic

hot water.

MODE C

heating only, with the connection of an external storage tank (accessory kit

available upon request) (managed by a temperature probe) for preparing

domestic hot water. When connecting the storage tank not supplied by us,

make sure that the NTC probe has the following characteristics: 10 kOhm

at 25°C, B 3435 ±1%.

According to the ue gas discharge device, the boiler is classied in catego-

ries B23P, B53P, C13, C23, C33, C43, C53, C63, C83, C93, C13x, C33x,

C43x, C53x, C63x, C83x, C93x.

In conguration B23P and B53P (when installed indoors), the appliance

cannot be installed in bedrooms, bathrooms, showers or where there are

open replaces without a proper air ow. The room where the boiler is in-

stalled must have proper ventilation.

In conguration C, the appliance can be installed in any type of room and

there are no limitations due to ventilation conditions or room volume.

3 - INSTALLATION

3.1 Installation regulations

Installation must be carried out by qualied personnel, in accordance with

local regulations.

POSITION

The boiler has protection that guarantees correct operation with a tempera-

ture range from 0°C to 60°C.

To take advantage of protective devices, the appliance must be able to start up,

since any lockout condition (for example, absence of gas or electrical supply, or

safety operation) deactivates the protective devices. If the machine is left pow-

ered down for long periods in areas where temperatures may fall below 0°C,

and you do not want to drain the heating system, you are advised to add a good

quality antifreeze liquid to the primary circuit to protect it from freezing. Care-

fully follow the manufacturer’s instructions with regards not only the percentage

of antifreeze liquid to be used for the minimum temperature at which you want

to keep the machine circuit, but also the duration and disposal of the liquid

itself. For the domestic hot water part, we recommend you drain the circuit.

The boiler component materials are resistant to ethylene glycol based an-

tifreeze liquids.

MINIMUM DISTANCES

In order to have access to the boiler to perform regular maintenance opera-

tions, respect the minimum clearances foreseen for installation (g. 9).

For correct appliance positioning:

- do not place it on a cooker or other cooking device

- do not leave inammable products in the room where the boiler is installed

- heat sensitive walls (for example, wooden walls) must be protected with

proper insulation.

IMPORTANT

Before installation, wash all system piping carefully in order to remove any

residues that may impair the operation of the appliance.

Connect the drain manifold to a suitable drainage system (for details, refer to

chapter 3.5). The domestic hot water circuit does not need a safety valve, but

make sure that the pressure of waterworks does not exceed 6 bar. In case of

doubts, install a pressure reducer. Prior to ignition, make sure that the boiler

is designed to operate with the gas available; this can be checked by the

message on the packaging and the adhesive label indicating the gas type. It

is very important to highlight that in some cases the smoke pipes are under

pressure and therefore, the connections of several elements must be airtight.

In some parts of the manual, some symbols are used:

WARNING = for actions requiring special care and adequate preparation

FORBIDDEN = for actions that MUST NOT be performed

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Beretta Ciao Green 25 RSI Zentralheizungskessel zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Beretta zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Beretta Ciao Green 25 RSI Zentralheizungskessel in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Beretta Zentralheizungskessel
Weitere Anleitungen von Zentralheizungskessel

Häufig gestellte Fragen zu Beretta Ciao Green 25 RSI Zentralheizungskessel

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Beretta Ciao Green 25 CSI Zentralheizungskessel

Bedienungsanleitung

Beretta Exclusive Green HE 35 BSI Zentralheizungskessel

Bedienungsanleitung

Beretta Ciao Green 29 CSI Zentralheizungskessel

Bedienungsanleitung

Junkers ZSB 14-5C 21 S0000 Cerapur Zentralheizungskessel

Bedienungsanleitung

Daikin ETVH16S23DA9W Altherma Zentralheizungskessel

Bedienungsanleitung

Saunier Duval Themaclassic FC 24 Zentralheizungskessel

Bedienungsanleitung

BEKO Megalogic 24 Zentralheizungskessel

Bedienungsanleitung

Bosch GC7000F 50 23 Zentralheizungskessel

Verwandte Kategorien