Bedienungsanleitung Yato YT-2346 Farbspritz

Bedienungsanleitung

ORIGINAL INSTRUCTION

6

EN

Before operation of the device may commence, please read the whole manual and keep it.

PURPOSE

The purpose of the spray gun is to execute lacquering jobs. The agent which is necessary for the spray gun to function properly

is compressed air. The lacquer from the spray gun tank and the compressed air the spray gun is supplied with form a mixture of

lacquer droplets and air at the spray gun nozzle mouth.

TECHNICAL DATA

Catalogue

number

Nozzle

diameter

Tank

capacity

Maximum air

consumption

Maximum air

pressure

Coating material

fl ow (water)

Noise level L

pA

/ L

wA

(EN 14462)

Vibrations Weight

[mm] [l] [l/min.] [MPa] [l/min.] [dB(A)] [m/s

2

] [kg]

YT-2340 1,4 0,6 410 0,2 - 0,3 0,19 - 0,25 74 / 85 < 2,5 0,74

YT-2341 1,5 0,6 410 0,3 0,15 - 0,22 76 / 87 < 2,5 0,64

YT-2346 1,8 1,0 380 0,4 0,16 - 0,24 79 / 90 < 2,5 0,96

YT-2357 0,8 0,1 220 0,2 - 0,3 0,07 - 0,11 67 / 78 < 2,5 0,34

SAFETY RECOMMENDATIONS

Do not ever direct the outlet of the tool towards people – the coating materials or compressed air may cause injuries. Injection

of the lubricant may cause necrosis or even lead to amputation of a limb. In case of injection of a lubricant, consult a doctor im-

mediately.

Before you proceed to installation, operation, repairs, maintenance actions or replacement of accessories, as well as in case

of work in the vicinity of a pneumatic tool, it is required to get acquainted with the operating manual, due to numerous hazards

involved. Otherwise there is a risk of serious injuries. Installation, adjustments and assembly of pneumatic tools may be carried

out exclusively by qualifi ed and trained personnel. Do not modify the pneumatic tool. Modifi cations may impair the effi ciency and

compromise the safety level, as well as increase the possible risks to the operator of the tool. Do not dispose of the operating

manual, but hand it to the operator of the tool. Do not use the pneumatic tool, if it is damaged.

Operators and service personnel must be given proper training regarding operation and maintenance of the device.

It is prohibited to apply any other gas than compressed air.

Using other gases may be a cause of serious injuries, fi res or explosions.

While connecting the tool to a compressed air system, it is required to consider the space which is required for the hose, in order

to avoid damage to the hose or to the connectors.

The working area must be equipped with an effi cient ventilation system. Absence of effi cient ventilation system may imply a risk

to health or cause fi res or explosions.

The tool has not been designed to be operated in explosive atmospheres.

The tool must be operated far from sources of heat and fi re, since these might damage the device or reduce its effi ciency.

Observe general safety regulations during work with sprayed materials, and wear appropriate individual protection means, such

as goggles, masks and gloves.

During work and maintenance tasks there is a risk of ingestion of particles of sprayed materials or substances used for mainte-

nance due to the following causes:

- insuffi cient natural or forced ventilation,

- incorrect atomizing pressure,

- insuffi cient optimisation of parameters of atomization in order to reduce contamination,

- incorrect distance between the nozzle of the tool and the area of application of the sprayed material; the distance must be

adequately adjusted in accordance with the kind of sprayed substance,

- ingestion of solvent vapours or other harmful substances

- incorrect application, for example use of incorrect sprayed substances.

Do not ever leave an assembled pneumatic system unattended by a person authorised to operate it. Do not allow children near

an assembled pneumatic system.

Compressed air under high pressure may cause the tool to recoil in an opposite direction to the direction of ejection of the sprayed

material. Take special precautions, since the recoil may – under certain circumstances – cause multiple injuries.

It is recommended to test the tool, before proceeding to operate it. It is recommended to properly train persons meant to operate

the tool. This will signifi cantly improve the level of safety.

Observe recommendations specifi ed by the manufacturer of the sprayed materials and use them in accordance with the specifi ed

personal protection, fi re protection and environmental protection regulations. In case the recommendations of the manufacturer of

the sprayed materials are not observed, there is a risk of serious injuries.

In order to ascertain the compatibility with the applied sprayed materials, a list of materials applied in the design of the tool shall

be available, if requested.

During work with compressed air energy accumulates in the whole system. Be careful during work and breaks, so as to avoid

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Yato YT-2346 Farbspritz zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Yato zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Yato YT-2346 Farbspritz in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Yato Farbspritze
Weitere Anleitungen von Farbspritze

Häufig gestellte Fragen zu Yato YT-2346 Farbspritz

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Yato YT-2341 Farbspritz

Bedienungsanleitung

Yato YT-2357 Farbspritz

Bedienungsanleitung

Yato YT-2340 Farbspritz

Bedienungsanleitung

Parkside IAN 303118 Farbspritz

Bedienungsanleitung

Greencut PIN660C Farbspritz

Bedienungsanleitung

Vonroc S_SG502DC Farbspritz

Bedienungsanleitung

Parkside IAN 344907 Farbspritz

Bedienungsanleitung

Powerplus POWEBPSS2 Farbspritz

Verwandte Kategorien