Bedienungsanleitung Whirlpool SPICR312WF O Klimagerät

Bedienungsanleitung

- 7 -

6-6 No ignition sources

No person carrying out work in relation to a refrigeration system which involves exposing any pipe

work that contains or has contained ammable refrigerant shall use any sources of ignition in such

a manner that it may lead to the risk of re or explosion. All possible ignition sources, including

cigarette smoking, should be kept suciently far away from the site of installation, repairing,

removing and disposal, during which ammable refrigerant can possibly be released to the

surrounding space. Prior to work taking place, the area around the equipment is to be surveyed

to make sure that there are no ammable hazards or ignition risks. “No Smoking” signs shall be

displayed.

6-7 Ventilated area

Ensure that the area is in the open or that it is adequately ventilated before breaking into the system

or conducting any hot work. A degree of ventilation shall continue during the period that the work

is carried out. The ventilation should safely disperse any released refrigerant and preferably expel it

externally into the atmosphere.

6-8 Checks to the refrigeration equipment

Where electrical components are being changed, they shall be t for the purpose and to the correct

specication. At all times the manufacturer’s maintenance and service guidelines shall be followed.

If in doubt consult the manufacturer’s technical department for assistance. The following checks

shall be applied to installations using ammable refrigerants:

- The charge size is in accordance with the room size within which the refrigerant containing parts are

installed;

- The ventilation machinery and outlets are operating adequately and are not obstructed;

- If an indirect refrigerating circuit is being used, the secondary circuit shall be checked for the

presence of refrigerant;

- Marking to the equipment continues to be visible and legible. Markings and signs that are illegible

shall be corrected;

- Refrigeration pipe or components are installed in a position where they are unlikely to be exposed

to any substance which may corrode refrigerant containing components, unless the components are

constructed of materials which are inherently resistant to being corroded or are suitably protected

against being so corroded.

6-9 Checks to electrical devices

Repair and maintenance to electrical components shall include initial safety checks and component

inspection procedures. If a fault exists that could compromise safety, then no electrical supply

shall be connected to the circuit until it is satisfactory dealt with. If the fault cannot be corrected

immediately but it is necessary to continue operation, an adequate temporary solution shall be

used. This shall be reported to the owner of the equipment so all parts are advised. Initial safety

checks shall include:

- That capacitors are discharged: this shall be done in a safe manner to avoid possibility of sparking;

- That there no live electrical components and wiring are exposed while charging, recovering or

purging the system;

- That there is continuity of earth bonding.

7. Repairs to sealed components

During repairs to sealed components, all electrical supplies shall be disconnected from the equipment

being worked upon prior to any removal of sealed electrical supply to equipment during servicing,

then a permanently operating form of leak detection shall be located at the most critical point to warn

of a potentially hazardous situation. Particular attention shall be paid to the following to ensure that by

working on coelectrical components. The casing is not altered in such a way that the level of protection

is aected. This shall include damage to cables, excessive number of connections, terminals not made to

original specication, damage to seals, incorrect tting of glands, etc. Ensure that apparatus is mounted

securely. Ensure that seals or sealing materials have not degraded such that they no longer serve the

purpose of preventing the ingress of ammable atmospheres. Replacement parts shall be in accordance

with the manufacturer’s specications.

SAFETY INSTRUCTIONS

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Whirlpool SPICR312WF O Klimagerät zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Whirlpool zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Whirlpool SPICR312WF O Klimagerät in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Whirlpool Klimageräte
Weitere Anleitungen von Klimageräte

Häufig gestellte Fragen zu Whirlpool SPICR312WF O Klimagerät

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Whirlpool AMC 996 Klimagerät

Bedienungsanleitung

Whirlpool WA20ODU32 Klimagerät

Bedienungsanleitung

Whirlpool SPIW409/2 Klimagerät

Bedienungsanleitung

Whirlpool SPIW309A3WF20 Klimagerät

Bedienungsanleitung

Whirlpool WA24ODU Klimagerät

Bedienungsanleitung

Whirlpool PACF212HP B Klimagerät

Bedienungsanleitung

Whirlpool FM18IDU32 Klimagerät

Bedienungsanleitung

Whirlpool AMD 003 Klimagerät

Verwandte Kategorien