Bedienungsanleitung VonHaus 3500167 Bohrschrauber

Bedienungsanleitung

A5P | 01

Prevent unintentional starting. Ensure the switch is in the

o-position before connecting to power source and/or

battery pack, picking up or carrying the tool.

Carrying power tool/machine with your nger on the

switch or energizing power tool/machine that have the

switch on invites accidents.

Remove any adjusting key or spanner before turning the

power tool/machine on. A spanner or a key left attached

to a rotating part of the power tool/machine may result in

personal injury.

Do not overreach. Keep proper footing and balance at

all times. This enables better control of the power tool/

machine in unexpected situations.

Dress appropriately. Do not wear loose clothing or jew-

ellery.

Keep your hair, clothing and gloves away from moving

parts. Loose clothes, jewellery or long hair can be caught

in moving parts.

If devices are provided for the connection of dust extrac-

tion and collection facilities, ensure these are connected

and properly used. Use of dust collection can reduce

dust-related hazards.

WORK AREA SAFETY Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

Do not operate power tool/machine in explosive atmos-

pheres, such as in the presence of ammable liquids,

gases or dust.

Power tool/machine create sparks which may ignite the

dust or fumes.

Keep children and bystanders away while operating a

power tool/machine. Distractions can cause you to lose

control.

GENERAL POWER TOOL USE AND CARE Do not force

the power tool/machine. Use the correct power tool/ma-

chine for your application. The correct power tool/ma-

chine will do the job better and safer at the rate for which

it was designed.

Do not use the power tool/machine if the switch does not

turn it on and o. Any power tool/machine that cannot

be controlled with the switch is dangerous and must be

repaired.

Disconnect the plug from the power source and/or the

battery pack from the power tool/machine before making

any adjustments, changing accessories, or storing pow-

er tool/machine tools. Such preventive safety measures

reduce the risk of starting the power tool/machine ac-

cidentally.

Store idle power tool/machine out of the reach of children

and do not allow persons unfamiliar with the power tool/

machine or these instructions to operate the power tool/

machine.

Power tool/machines are dangerous in the hands of un-

trained users.

Maintain power tool/machines. Check for misalignment

or binding of moving parts, breakage of parts and any

other condition that may aect the power tool/machines

operation. If damaged, have the power tool/machines re-

paired before use. Many accidents are caused by poorly

maintained power tool/machines.

Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting edg-

es are less likely to bind and are easier to control.

Use the power tool/machine accessories and tool bits in

accordance with these instructions, take into account the

working conditions and the work to be performed.

Use of the power tool/machine for operations dierent

from those intended could result in a hazardous situation.

CLEANING & MAINTENANCE Never soak or immerse

electrical components and or a component that has a

plug attached.

Disconnect the plug from the power source before mak-

ing any adjustments, changing accessories, or storing.

Such preventive safety measures reduce the risk of start-

ing the power tool accidentally.

Ensure the motor has fully stopped before cleaning,

clearing a blockage, checking, or carrying out any main-

tenance on the tool.

Maintain your power tool. Check for misalignment or

binding of moving parts, breakage of parts and any oth-

er condition that may aect the power tool’s operation.

If damaged, have the power tool repaired by a qualied

repair person before use. Many accidents are caused by

poorly maintained power tools.

Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to

bind and are easier to control.

Regularly check external nuts and xings to ensure vibra-

tion caused by normal use has not begun to loosen them.

Store idle power tools out of reach of children and do

not allow persons unfamiliar with the power tool or these

instructions to operate the Breaker.

Locate the power tool out of reach of children, in a dry,

locked unit.

Make sure that the cord is located so that it will not be

stepped on, tripped over, or otherwise subjected to dam-

age or stress.

Remove the plug from the mains socket / battery (where

applicable) before carrying out any adjustment or main-

tenance.

Always store the power tool/machine in a dry place.

If the power cord is damaged, it must be replaced by a

qualied service technician.

Keep the ventilation slots and motor housing as free of

dirt and dust as possible (where applicable).

Clean the power tool/machine by rubbing it with a clean

cloth and blow it clean using low-pressure compressed

air is recommended.

Ensure you have all the pieces listed. If you are missing

any components, contact our customer services

department at [email protected] (UK/EU)

[email protected] (US).

DO NOT proceed with assembly if any components are

missing.

DRILLS

The drill must be secured.

The work-piece must be clamped or secured to the work-

piece support. Do not drill pieces that are too small to be

clamped securely.

Do not wear gloves. Keep your hands out of the drilling

area while the tool is running.

Make sure the accessory is rotating before feeding into

the work-piece.

When the accessory is jammed, stop applying downward

pressure and switch o the tool. Investigate and take cor-

rective actions to eliminate the cause of the jam.

Avoid generating long chips by regularly interrupting

downward pressure.

Never remove chips from the drilling area while the tool

is running, To remove chips, move the accessory away

from the work-piece, switch o the tool and wait for the

accessory to stop moving. Use tools such as brush or

hook to remove chips.

Accessories with speed ratings must be rated at least

equal to the maximum speed marked on the power tool.

TECHNICAL SPECIFICATION

Tool Rating: 18V

FR

Veuillez lire attentivement ces instructions avant utilisa-

tion et conservez-les pour pouvoir les consulter à l’avenir.

UTILISATION PRÉVUE Utilisez uniquement l’outil élec-

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr VonHaus 3500167 Bohrschrauber zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, VonHaus zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres VonHaus 3500167 Bohrschrauber in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für VonHaus Bohrschrauber
Weitere Anleitungen von Bohrschrauber

Häufig gestellte Fragen zu VonHaus 3500167 Bohrschrauber

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

VonHaus 3500166 Bohrschrauber

Bedienungsanleitung

Parkside IAN 379888 Bohrschrauber

Bedienungsanleitung

Skil 3008 AC Bohrschrauber

Bedienungsanleitung

Skil 3020 BA Bohrschrauber

Bedienungsanleitung

Skil 3070 FA Bohrschrauber

Bedienungsanleitung

Skil 3076 JA Bohrschrauber

Bedienungsanleitung

Skil 3018 CA Bohrschrauber

Bedienungsanleitung

Skil 3070 HD Bohrschrauber

Verwandte Kategorien