Bedienungsanleitung Veltia V7 Ion Shield Händetrockner

Bedienungsanleitung

A

SAFETY

SEGURIDAD

SÛRETÉ

SEGURANÇA

SICHERHEIT

EN

READ AND SAVE THESE INSTRUCTIONS

• Important Safety Instructions

WARNING – To Reduce The Risk Of Fire Or Electric Shock, Do Not Use This Fan With Any Solid-State

Speed Control Device

• Installation Instructions

WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE

THE FOLLOWING:

• Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable

codes and standards, including fire-rated construction.

• When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

• Use this unit only in the manner intended by the manufacturer. If you have questions, contact to the

manufacturer.

• Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting

means to prevent power from being switched on accidentally. When service disconnecting means cannot

be locked, securely fasten a prominent warning device, such as a tag to the service panel.

Packaging:

Packaging protects the unit in warehouse and transportation. It’s made of recyclable

materials. When packaging is no longer needed, dispose It appropriately according

to recycling normative.

When replacing a product:

This unit has been marked with European WEEE symbol. Obsolete or inoperative

units must be disposed according to electric and electronic waste management

normative in your country. This unit must be disposed in an appropriate manner to

avoid potential environmental damages o just for re-cycling some of their materials.

In Europe you must dispose this unit in a recycling center in your area or contacting your dealer or local

government.

MAINTENANCE

External: This unit must be cleaned once per day using a soft cloth with water for removing dust and water

over external case. Do not use scouring agents or all-purpose cleaners. Never immerse unit in water.

! WARNING: MANUALS

This product has been designed to operate safely and reliable for several years. However because of its

electronic nature manuals and technical information supplied along with the hand dryer must be carefully

read. Please keep this manual and the rest of information for future consults. If you transfer the unit to a third

party please include manuals and unit technical information.

• Water Tank: Water from drying process is recollected in a tank located in bottom part of the unit. Water

tank must be emptied at least once per week. This unit generates a visual and audible alarm when tank

is near high level. If tank is not emptied, water will overflow dropping to the floor. This unit works

properly even when high level is in ON status.

• Dust filters: This unit has dust filters located in water tank. This filters need to be revised and cleaned

at least once per week. Please consult maintenance section of this manual before performing any

maintenance operation.

INSTALLATION AND OPERATION

Revise related sections of this manual

TABLE OF SPECIFICACIONS

MODEL: 240V 120v

Voltage

220/230/240V∼

110/120V∼

Frequency

50/60 Hz

50/60Hz

Power

1.760W

1.749W

Current

8,0A @ 230Vac

15,9A @ 120Vac

Electrical Isolation

Class II

Class II

Air Speed (*)

230 mph (370 km/h)

230 mph (370 km/h)

Dimensions

11,8x7,67x24,29 (inches)

300x195x617 (mm)

11,8x7,67x24,29 (inches)

300x195x617 (mm)

Weight

21,1 Lb. (9,55kg)

21,1 Lb. (9,55kg)

Protection Level

IPX1

IPX1

(*) Valid for V7300. V7 TRI-BLADE: 211 mph (340 km/h)

This unit complies with the recognized regulations of technology and relevant safety directives.

We hereby confirm the conformity with following European Directives: Low Voltage Directive (LVD)

2006/95/CE and Electromagnetic Compatibility Directive (EMC) 2004/108/EC.

Subject to modifications without notice.

!! WARNING: ELECTRICAL CIRCUIT:

• This unit must be powered by a dedicated circuit branch protected by a circuit breaker with the appropriate

rating:

Model 240V: Max Overcurrent Protection (MOP): 15A Minimum Circuit Ampacity (MCA): 15A

Model 120V: Max Overcurrent Protection (MOP): 20A Minimum Circuit Ampacity (MCA): 20A

• Circuit cable must fit current consumption for your product as stated in this manual.

• External electrical break circuits must be used in accordance with local regulations of installation. The

device must have a minimum distance of 3mm between contacts in all poles, for disconnection.

• Minimum section of fixed wiring must be of 1,0mm

SAFETY AND USE

• This unit has been designed for indoor use only, covered from water sun and extreme temperatures do not

use it outdoors or close to moisture and heat generators.

• Minimal distance to water source must be at least 16 inches (40cm).

• Must be installed following the instructions of this manual.

• Manufacturer is not responsible for damages caused by misuses or defective installations.

• This hand dryer can only be revised maintained and repaired by trained and authorized personnel.

• Always use original pieces and spare parts.

• Power the hand dryer from appropriate power source according to the acquired equipment. The unit

electrical specifications plate shows the power rating.

• This device is not

intended

to be used by persons (children

included)

having

reduced

capabilities

(physical, sensory,

mental),

or lack of

experience

and knowledge exception made of

those who

have

had supervision and training on the use of the device by a person

responsible

for

its security.

Children

should be always supervised to avoid them playing with the

device.

• This product is designed for an efficient and quick hand drying. Never try to dry any other part of the body

• Foreign objects must not be put neither in nor over the hand dryer.

• Heavy objects must not be put over the hand dryer.

• If this unit fails it must be taken out of order and technical service (or distributor) must be called for a

product check.

• Inner space of this product is protected and locked by screws so only trained and authorized personnel

should revise this unit. There are neither serviceable nor replaceable parts inside the unit

2

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Veltia V7 Ion Shield Händetrockner zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Veltia zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Veltia V7 Ion Shield Händetrockner in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Veltia Händetrockner
Weitere Anleitungen von Händetrockner

Verwandte Produkte

Bedienungsanleitung

Veltia V7 300 Händetrockner

Bedienungsanleitung

Veltia V7 Triblade Händetrockner

Bedienungsanleitung

Veltia VFusion Händetrockner

Bedienungsanleitung

Mediclinics M09AB Machflow Händetrockner

Bedienungsanleitung

Mediclinics M19AC Machflow Plus Händetrockner

Bedienungsanleitung

Mediclinics E85A Saniflow Händetrockner

Bedienungsanleitung

Mediclinics M99A Juniorplus Händetrockner

Bedienungsanleitung

Mediclinics M17A Speedflow Händetrockner

Verwandte Kategorien