Bedienungsanleitung Triton TRA001 Oberfräse

Bedienungsanleitung

4

GB

SAFETY INSTRUCTIONS

WARNING: Always wear ear protection where the sound

level exceeds 85dB(A) and limit the time of exposure if

necessary. If sound levels are uncomfortable, even with

ear protection, stop using the tool immediately and check the ear

protection is correctly fitted and provides the correct level of sound

attenuation for the level of sound produced by your tool.

WARNING: User exposure to tool vibration can result in loss of

sense of touch, numbness, tingling and reduced ability to grip.

Long term exposure can lead to a chronic condition. If necessary,

limit the length of time exposed to vibration and use anti-vibration

gloves. Do not operate the tool with hands below a normal

comfortable temperature, as vibration will have a greater effect.

Use the figures provided in the specification relating to vibration to

calculate the duration and frequency of operating the tool.

Sound and vibration levels in the specification are determined

according to EN60745 or similar international standards. The

figures represent normal use for the tool in normal working

conditions. A poorly maintained, incorrectly assembled, or misused

tool, may produce increased levels of noise and vibration.

www.osha.europa.eu provides information on sound and

vibration levels in the workplace that may be useful to domestic

users who use tools for long periods of time.

WARNING: This appliance is not intended for use by persons

(including children) with reduced, physical or mental capabilities

or lack of experience or knowledge unless they have been given

supervision or instruction concerning use of the appliance by a

person responsible for their safety. Children must be supervised to

ensure that they do not play with the appliance.

Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-

operated (corded) power tool or battery-operated (cordless) power

tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas

invite accidents.

b) Do not operate power tools in explosive atmospheres, such

as in the presence of flammable liquids, gases or dust.

Power tools create sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while operating a

power tool. Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never modify the

plug in any way. Do not use any adapter plugs with earthed

(grounded) power tools. Unmodified plugs and matching

outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces,

such as pipes, radiators, ranges and refrigerators. There

is an increased risk of electric shock if your body is earthed or

grounded.

c) Do not expose power tools to rain or wet conditions. Water

entering a power tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away

from heat, oil, sharp edges or moving parts. Damaged or

entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension

cord suitable for outdoor use. Use of a cord suitable for

outdoor use reduces the risk of electric shock.

f) If operating a power tool in a damp location is unavoidable,

use a residual current device (RCD) protected supply. Use

of an RCD reduces the risk of electric shock.

WARNING: When used in Australia or New Zealand, it is

recommended that this tool is ALWAYS supplied via Residual

Current Device (RCD) with a rated residual current of 30mA or less

3) Personal safety

a) Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a power

tool while you are tired or under the influence of drugs,

alcohol or medication. A moment of inattention while

operating power tools may result in serious personal injury.

b) Use personal protective equipment. Always wear eye

protection. Protective equipment such as dust mask, non-

skid safety shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in the

off-position before connecting to power source and/or

battery pack, picking up or carrying the tool. Carrying power

tools with your finger on the switch or energising power tools

that have the switch on invites accidents.

Symbols / Safety Instructions

SYMBOLS

ENVIRONMENTAL PROTECTION

Waste electrical products should not be

disposed of with household waste. Please

recycle where facilities exist. Check with your

local authority or retailer for recycling advice.

Always wear ear, eye and respiratory

protection.

Do not use before viewing and

understanding the full operating

instructions

Conforms to relevant legislation

and safety standards.

Instruction warning.

Double insulated for additional

protection.

330165_Z1MANPRO1(with Japanese).indd 4 21/07/2014 09:48

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Triton TRA001 Oberfräse zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Triton zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Triton TRA001 Oberfräse in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Triton Oberfräsen
Weitere Anleitungen von Oberfräsen

Häufig gestellte Fragen zu Triton TRA001 Oberfräse

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Triton JOF001 Oberfräse

Bedienungsanleitung

Triton MOF001 Oberfräse

Bedienungsanleitung

Parkside IAN 79032 Oberfräse

Bedienungsanleitung

Skil 1845-02 Oberfräse

Bedienungsanleitung

Sparky X 110CES Plus Oberfräse

Bedienungsanleitung

Cecotec MultiShape 500 Oberfräse

Bedienungsanleitung

Einhell TP-RO 18 Set Li BL Oberfräse

Bedienungsanleitung

Einhell TE-RO 1255 E Oberfräse

Verwandte Kategorien