Bedienungsanleitung Thomson ROC1128LG Fernbedienung

Bedienungsanleitung

4

GB

3. If the LED ashes 3times and then remain

on, the command has been learned

successfully.

4. Repeat these steps to learn other key

functions.

5. Press the [MUTE] and [VOL-] buttons to

save all learnt functions and to exit the

learning mode.

Note

While replacing the batteries, the remote control

will keep the functions of the learned keys.

6.4 CLEARING OF LEARNED KEYS

6.4.1 CLEARING OF ONE LEARNED KEY

1. Press and hold [MUTE] and [VOL+] keys

for 5seconds until the LED will be lit.

5

2. Enter the code [9] [8] [1], the LED will

ash 2times and then remain on.

3. Press and release the desired key at the

replacement remote control which you

want to clear the learned command. If the

LED ashes 3times, the learned command

has been cleared successfully.

6.4.2 CLEARING OF ALL LEARNED KEYS

1. Press and hold [MUTE] and [VOL+] keys

for 5seconds until the LED will be lit.

5

2. Enter the code [9] [8] [2], the LED will ash

2times and then remain on.

3. Press and release the [OK] key at the

replacement remote control. If the LED

ashes 3times, all commands have been

cleared successfully.

7. SIMPLE Mode

This remote control is equipped with an

SIMPLE Mode.Thus you could reduce the

functionality of the remote control to its basic

functions. It avoids that the TV Settings are

changed by mistake.

During the SIMPLE Mode you still could use

following keys:

Power TV ON /OFF

Volume UP/DOWN

Turn your TV sound ON/OFF

Channel UP/DOWN

0-9 Numeric keys 0–9toenter channel

numbers

Teletext On

Use to select avariety of on screen

options

GUIDE Show the Electronic Program Guide

(if supported by the TV)

Input Signal source

Exit TV Menu

Switch TV or Radio mode

7.1 Enter SIMPLE Mode

1. Press and hold [MUTE] and [VOL+] keys for

5seconds until the LED will be lit.

5

2. Enter the code [9] [7] [0], the LED will ash

two times and then remain on.

3. Press and release the [OK] key,ifLED ash

3times, you have entered the SIMPLE

Mode successfully

7.2 Exit SIMPLE Mode

1. Press and hold [MUTE] and [VOL+]

for 5seconds until the LED will be lit.

5

2. Enter the code [9] [7] [0], the LED will ash

two times and then remain on.

3. Press and release the [EXIT] key,ifLED

ash 3times, you have exit the SIMPLE

Mode.

Note

While the SIMPLE Mode is activated only

the keys mentioned in chapter 7will work.

If one of these keys is pressed the LED will

be lit until the key is released. If one key is

pressed during the normal mode, the LED

will ash.

8. Maintenance

•Donot mix new and used batteries for

powering the Universal Remote Control, as

old batteries tend to leak and may cause

power drain.

•Donot use corrosive or abrasive cleansers on

your Universal Remote Control.

•Keep the Universal Remote Control dust free

by wiping it with asoft, dry cloth.

9. Troubleshooting

Q. My Universal Remote Control does not

work at all!

A. Check your TV. If the TV main switch is

turned off, your Remote cannot operate

your TV.

A. Check whether your batteries are inserted

properly and are in the correct +/- position.

A. If the batteries are low, replace the

batteries.

Q. My TV responds only to some of the

commands.

A. Try other codes until most keys work

properly.

Q. Some keys of the Remote Control do not

work anymore?

A. Maybe the SIMPLE Mode had been

activated. Deactivate the SIMPLE Mode as

explained in chapter 7.2.

TEXT

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Thomson ROC1128LG Fernbedienung zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Thomson zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Thomson ROC1128LG Fernbedienung in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Thomson Fernbedienungen
Weitere Anleitungen von Fernbedienungen

Häufig gestellte Fragen zu Thomson ROC1128LG Fernbedienung

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Thomson ROC4206 Fernbedienung

Bedienungsanleitung

Thomson ROC330 Fernbedienung

Bedienungsanleitung

Thomson ROC740 Fernbedienung

Bedienungsanleitung

Thomson ROC550 Fernbedienung

Bedienungsanleitung

Thomson ROC4411 Fernbedienung

Bedienungsanleitung

Thomson ROC240 Fernbedienung

Bedienungsanleitung

Thomson ROC1128PHI Fernbedienung

Bedienungsanleitung

Thomson ROC130 Fernbedienung

Verwandte Kategorien