Bedienungsanleitung Tesy 100L Warmwasserspeicher

Bedienungsanleitung

6 Instructions for use and maintenance

EN

Dear Clients,

The TESY team would like to congratulate you on your new purchase. We

hope that your new appliance shall bring more comfort to your home.

This technical description and instructions manual was prepared in

order to acquaint you with the product and the conditions of proper

installation and use. These instructions were also intended for use

by qualied technicians, who shall perform the initial installation, or

disassembly and repairs in the event of a breakdown.

The observance of the instructions contained herein is in the interest

of the buyer and represents one of the warranty conditions, outlined in

the warranty card.

Please consider that following the current instructions will primarily

be of interest to the consumer, but along with this, it is also one of

the warranty conditions, pointed out in the warranty card, so that the

consumer can benet from the free warranty services. The producer

is not responsible for damages in the appliance that have appeared

as a result of operation and/or installation not corresponding to the

instructions here.

The electric water heater complies with the requirements of EN 60335-1,

EN 60335-2-21.

I. INTENDED USE

The appliance is intended to supply hot water to household sites

equipped with a piping system working at pressure below 6 bar (0,6

Mpa).

It is designed to operate only in closed and heated premises where the

temperature is not lower than 4°C and it is not designed to operate in a

continuous protracted regime.

The appliance is designed to operate in regions where the water

hardness is not more than 10°dH. In case that it is installed in a region

where the water is harder it is possible that limestone precipitation

accumulate very fast. This can cause a specic noise during heating,

as well as fast damaging of the electrical part. For regions with harder

water yearly cleaning of the limestone precipitation in the appliance

is recommended, as well as usage of not more than 2 kW of heating

power.

II. TECHNICAL PARAMETERS

1. Nominal volume V, liters - see the appliance’s rating plate

2. Nominal voltage - see the appliance’s rating plate

3. Nominal power consumption - see the appliance’s rating plate

4. Nominal pressure - see the appliance’s rating plate

This is not the water mains pressure. This is the pressure

that is announced for the appliance and refers to the

requirements of the safety standards.

5. Water heater type - closed type accumulating water heater, with

thermal insulation

6. Inner coating - for models: GC-glass-ceramics; SS-stainless steel;

EV - email

7. Water temperature after turning o of the thermostat: from 60°С

to 75°С.

For models with a regulated thermostat, the specied

temperature range refers to the cases when the thermostat is

set at maximum water heating temperature (see below).

III. IMPORTANT RULES

•

The water heater must only be mounted in premises with normal

re resistance.

•

Do not switch on the water heater unless you established it was

lled with water.

•

Qualied P&P specialists and Electricians must only perform the

connecting of the water heater to the water and electric mains. A

qualied technician is a person who has the competence according the

regulations of the country in question.

•

Upon connecting the water heater to the electric mains care must

be taken to connect the safety lead.

•

If the probability exists for the premise’s temperature to fall below

0°C, the water heater must be drained (observe the procedure outlined

in section V, subsection 2 ‘’Water heater’s piping connection”).

•

During operation – regime of heating the water – water drops

through the drainage opening of the protection valve are usual.

•

The protection valve should be left open to the atmosphere.

Measures should be taken to lead and collect the leakages in order

to prevent damages, ensuring that this is in conformation with the

requirements described in p. 2 in paragraph V.

•

The valve and the elements linked to it must be protected from

freezing.

•

During the heating the appliance could produce a hissing noise

(the boiling water). This is common and does not indicate any damage.

The noise gets higher with the time and the reason for this is the

accumulation of limestone. To remove the noise the appliance must

be cleaned from limestone. This type of cleaning is not covered by the

warranty.

•

In order to secure the water heater’s safe operation, the safety

return-valve must undergo regular cleaning and inspections for normal

functioning /the valve must not be obstructed/, and for the regions

with highly calcareous water it must be cleaned from the accumulated

lime scale. This service is not provided under warranty maintenance.

All alterations and modications to the water heater’s

construction and electrical circuitry are forbidden. If such

alterations or modications are established during inspection, the

appliance’s warranty shall be null and void. Alterations and

modications shall mean each instances of removal of elements

incorporated by the manufacturer, building in of additional

components into the water heater, replacement of elements by similar

elements unapproved by the manufacturer.

•

These instructions shall also apply to water heaters equipped with

a heat exchanger.

•

If the power supply cord (of models that have one) is damaged, it

must be replaced by a service representative or a person with similar

qualication, to avoid any risk.

•

This appliance can be used by children aged from 8 years and above

and persons with reduced physical, sensory or mental capabilities or

lack of experience and knowledge if they have been given supervision

or instruction concerning use of the appliance in a safe way and

understand the hazards involved.

•

Children shall not play with the appliance.

•

Cleaning and user maintenance shall not be made by children

without supervision.

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Tesy 100L Warmwasserspeicher zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Tesy zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Tesy 100L Warmwasserspeicher in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Tesy Warmwasserspeicher
Weitere Anleitungen von Warmwasserspeicher

Häufig gestellte Fragen zu Tesy 100L Warmwasserspeicher

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Tesy Anticalc 120 Rev Warmwasserspeicher

Bedienungsanleitung

Tesy GCV1204524DA04TS2RA Warmwasserspeicher

Bedienungsanleitung

Tesy 150L Warmwasserspeicher

Bedienungsanleitung

Tesy 30L Warmwasserspeicher

Bedienungsanleitung

Tesy GCH 1004430 Warmwasserspeicher

Bedienungsanleitung

Tesy Anticalc 100 Rev Warmwasserspeicher

Bedienungsanleitung

Tesy Anticalc 80 Rev Warmwasserspeicher

Bedienungsanleitung

Tesy Anticalc 50 Rev Warmwasserspeicher

Verwandte Kategorien