Bedienungsanleitung Steba Pikkolo 60 T 3 Heizgerät

Bedienungsanleitung

10

11

 IMPORTANT FOR FRANCE:

If the product is wall mounted, the electrical connection must be made according to the enclosed

drawing, cutting the cable and using a connection block between the product cable and the electricity

supply.

 In humid rooms, bathrooms or kitchens, this connection block must be installed at least 25 cm from

the floor. The electrical connection must also include the use of a 2-pole switch with a contact opening

distance of at least 3 mm.

5. Cable storage

 While the product is not in use, you can store the cable pushing it into the base of the product.

 Note that while the product is in operation, the cable must always be completely pulled out.

6. Use of the heater

See picture 5

6.1 Version with switch and thermostat



The heater has 2 knobs controlling the switch and the thermostat.

 The switch knob has 5 positions, allowing to select the desired power setting.

 Starting from the “¿” position, turn the thermostat knob clockwise until you hear a "click”: the

appliance starts working at the desired power setting.

 The thermostat maintains the desired room temperature switching on and off automatically the

appliance. The more the knob is turned clockwise, the higher is the maintained temperature.

Maximum thermostat setting corresponds at about 30°C; “¿” position corresponds to approximately

5°C.

 For correct use of the thermostat , see section “ USE OF THE THERMOSTAT”

6.2 Model with thermostat and 60' timer



The heater has 2 knobs.

 Turn the timer knob clockwise to select the working time you prefer from 5 to 60'. The heater starts

working at full power (2000W) and thermostat setting doesn’t influence the functioning;

 After the selected period the heater will automatically turn to mid power (1000W), thermostatically

controlled according to the thermostat setting. For the use of the thermostat see section 6.3.

 When the heater is working under timer control at full power, the thermostat doesn't control the room

temperature. In this condition, do not use the heater in small rooms when they are occupied by

persons not capable of leaving the room on their own, unless constant supervision is provided.

6.3 Use of the thermostat



In a room where the temperature is too high (more than 30°C), it is normal that the thermostat will not

switch on the heater.

 In a room where the temperature is too low (around 5°C or even less) it is also normal that the

thermostat will keep the appliance working until the temperature gets higher.

 To select the right thermostat position we suggest you to

- turn the thermostat in maximum position (clockwise);

- leave the appliance working until the comfortable temperature is reached;

- turn the knob anti clockwise until you hear a "click" and the appliance stops;

- turn clockwise again the knob (just a little): in this position the thermostat will maintain the

comfortable temperature you have selected.

7. Safety in the event of the product not functioning normally

 In the event of overheating, the safety system will automatically turn off the heating elements and the

motor. If this happens:

- switch off the fan heater using the main switch;

- remove the cause of overheating (i.e. obstacles in front of the air inlet or air outlet grilles, unusual

accumulations of dirt, etc);

- let the heater cool down for 15/20 minutes;

- switch on the fan heater and check it is functioning properly.

L If you notice irregular operation, damage to the heating element or to the structure of the appliance,

disconnect the product from the mains power supply and contact your technical assistance center or dealer.

8. Maintenance

 This heater does not require any particular maintenance.

 We recommend you clean the air inlet and air outlet grilles at least twice a year with a vacuum

cleaner, to remove dust from the motor and the heating elements.

 If the heater needs to be repaired, please contact an authorized center.

 If the cable is to be changed, please remember that a 2x1m

2

H05VV-F <HAR> cable must be used.

L

N

Electrical

t

it

Phase = brown

Neutral = blue

Product’s

d t

bl

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Steba Pikkolo 60 T 3 Heizgerät zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Steba zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Steba Pikkolo 60 T 3 Heizgerät in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Steba Heizgeräte
Weitere Anleitungen von Heizgeräte

Häufig gestellte Fragen zu Steba Pikkolo 60 T 3 Heizgerät

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Steba Mirror 60 TH Heizgerät

Bedienungsanleitung

Steba FH 504 Heizgerät

Bedienungsanleitung

Steba BS 1800 Touch Heizgerät

Bedienungsanleitung

Steba KH1 Heizgerät

Bedienungsanleitung

Steba Mirror 60 TH 2B Heizgerät

Bedienungsanleitung

Steba KH5 Heizgerät

Bedienungsanleitung

Steba Pikkolo Basic Heizgerät

Bedienungsanleitung

Steba E-vent Heizgerät

Verwandte Kategorien