Bedienungsanleitung Stanley SUPER 180 TIG LIFT Schweissgerät

Bedienungsanleitung

ENGLISH

The product is a portable, lightweight, single-phase 230 V,

50/60Hz welder with inverter technology. It allows MMA welding

with all electrodes type. The model allows TIG welding of the

most metals except the aluminium and alloys. Can be connected

to power generators with power equal to or higher than that

reported in Table 2. It is equipped with "HOT START", "ARC

FORCE" and "ANTI STICK" functions (for more details please

refer to the GENERAL PART manual included in the package).

DESCRIPTION OF THE MACHINE

Fig 1

1. Welding current Knob

2. Negative socket(-)

3. Positive socket (+)

4. Thermal protection LED indicator

5. LED indicator power on

6. selector TIG-MMA (only for the model TIG)

7. ON-OFF switch

8. Power Cord

INSTALLATION

The installation must be made by trained personnel in compliance

to the standard IEC 60974-9 and the current and local legislation.

To lift the machine it must be used the handle positioned on top of

the product with the machine in OFF position. The input voltage

must match the voltage indicated on the technical plate located on

the product. Use the machine on electric system having supply

features and power protection (fuse and / or differential switch)

that are compatible with the current required for its use. For more

details see the information on the plate placed on the machine.

TURN ON

Warning: Use all precautions required in the safety general

manual before operating the welder, reading carefully the risks

associated with the welding process.

ELECTRODE WELDING (MMA)

1. Connect the connectors of the earth clamp and electrode

holder to the poles of the device; choose the polarity

(forward or reverse) depending on the coating of the

electrodes (for more information see the information on

the electrodes packaging).

2. Connect the earth clamp to the work piece and insert the

electrode in the electrode holder

3. Connect the power cord to the power supply and turn on

the welder

4. Select the welding current as a function of the type of

electrode selected (Tab. 1).

5. Start the welding operation using all the necessary

protections to security.

Note: You must disconnect the earth clamp to the metal work

piece just after switching off the welding machine.

TIG WELDING (only for the TIG type)

1. Connect the connectors of the earth clamp and of the

torch to the poles of the device; choose the polarity (forward or

reverse) in relation to the type of material to be welded

2. Connect the earth clamp to the work piece

3. Connect the torch gas tube to the gas cylinder

4. Select the TIG mode

5. Select the welding current

6. Select the gas flow of the gas cylinder and open the torch

valve

7. Connect the power cord to the power supply and turn on

the welder

8. Use the torch to weld as in the following without a puse

between the two phases

Touch the piece with the electrode

Lift the electrode from the piece

about 2-5 mm

Stopped the welding, turn off the machine and close the gas valve.

THERMAL PROTECTION

In case of overheating of the machine the yellow LED indicates

that the thermal protection is on, you can start to weld it when the

LED is off

MAINTENANCE

Refer all servicing to qualified personnel.

Anomalies Cause

s Remedies

MMA

The device does not deliver any current

and the yellow indicator LED of thermal

protection lights up.

The welder thermal

protection has turned on.

Wait for the end of the cooling

time, around 2 minutes. The

indicator led turns off.

The device is on but it does not

deliver any current.

The cable of the earth

clamp or electrode holder

is not connected to the

welder.

Turn off the machine and check the connections.

Your unit does not weld correctly. Polarity error

. Check the polarity advised on the

electrodes packaging.

TIG

Instable arc

-)Default coming from the

tungsten electrode

-)Too important gas flow

rate

-) Use a tungsten electrode with the

adequate size

-) Reduce gas flow rate

The electrode melts Polarity error

Check that the earth clamp is really

connected to +

This Model is without PFC device and do not comply with IEC 61000-3-12. If they are to be connected to a low-voltage

mains supply, it is the responsibility of the user to ensure they can be connected. If necessary consult the operator of

your electrical

distribution system

This welding machine is for professional use only and is reserved for the industry.

4

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Stanley SUPER 180 TIG LIFT Schweissgerät zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Stanley zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Stanley SUPER 180 TIG LIFT Schweissgerät in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Stanley Schweissgeräte
Weitere Anleitungen von Schweissgeräte

Häufig gestellte Fragen zu Stanley SUPER 180 TIG LIFT Schweissgerät

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Stanley IPER E161 Schweissgerät

Bedienungsanleitung

Stamos S-Plasma 80P Schweissgerät

Bedienungsanleitung

Parkside IAN 70383 Schweissgerät

Bedienungsanleitung

Parkside PESG 120 B3 Schweissgerät

Bedienungsanleitung

Stamos Magitex 200 Schweissgerät

Bedienungsanleitung

Parkside IAN 373206 Schweissgerät

Bedienungsanleitung

Scheppach WSE5000-Multi Schweissgerät

Bedienungsanleitung

Parkside IAN 103333 Schweissgerät

Verwandte Kategorien