Bedienungsanleitung Sony CFD-V10 Stereoanlage

Bedienungsanleitung

Operating Instructions

Bedienungsanleitung

(Siehe Rückseite.)

CD Radio

Cassette-

Corder

©1996 by Sony Corporation

Printed in China

3-859-115-31(2)

Choosing the power sources

2 to a wall

outlet

1 to AC IN

Troubleshooting

The tape does not record.

• Make sure the tape is inserted

properly.

• Make sure the safety tab of the

cassette is in place.

The audio is weak/The audio

quality is poor.

• Clean the heads, pinch roller and

capstan with a cotton swab slightly

moistened with cleaning fluid or

alcohol.

• Demagnetize the heads and all metal

parts in the tape path with a

commercially available tape head

demagnetizer.

The sound is distorted.

• The TYPE II (high position) or TYPE

IV (metal) tape is being used. Use

TYPE I (normal) tape only.

Specifications

General

The power does not come on.

•Connect the AC power cord securely.

•Make sure the batteries are inserted

correctly.

•Replace all the batteries with new

ones if they are weak.

There is no audio.

•Make sure the FUNCTION selector is

set to the function you want to

operate.

•Adjust the volume.

•Unplug the headphones when

listening through speakers.

CD Player

The CD does not play/ “– –” lights

in the display even when a CD is

in place.

•Make sure that the CD compartment

is closed.

•Place the CD with the label surface

up.

•Clean the CD.

•Take out the CD and leave the CD

compartment open for about an hour

to dry moisture condensation.

•Make sure the FUNCTION selector is

set to CD.

The sound drops out.

•Reduce the volume.

•Clean the CD, or replace it if the CD

is badly damaged

•Place the player in a location free

from vibration.

•Cleans the lens with a commercially

available blower.

Radio

Audio is weak or has poor

quality.

•Replace all the batteries with new

ones if they are weak.

•Move the player away from the TV.

The picture of your TV becomes

unstable.

•If you are listening to an FM program

near the TV with an indoor antenna,

move the player away from the TV.

Tape player

The tape does not move when

you press an operation button.

•Close the cassette compartment

securely.

The r button does not function/

The tape does not play.

•Make sure the safety tab on the

cassette is in place.

•Make sure the FUNCTION selector is

set to CD, AM or FM.

The tape does not erase

completely.

•Clean the erasing heads.

•Replace all the batteries with new

ones if they are weak.

Warning

To prevent fire or shock

hazard, do not expose the

player to rain or

moisture.

To avoid electrical shock,

do not open the cabinet.

Refer servicing to

qualified personnel only.

Information

For customers in Europe

This Compact Disc player is

classified as a CLASS 1 LASER

product.

The CLASS 1 LASER PRODUCT

label is located on the bottom

exterior.

Warning

Do not install the appliance in a

confined space, such as a bookcase

or built-in cabinet.

The FUNCTION selector is located

at the front.

When you turn on the player, the

OPR/BATT indicator lights up.

Notice for customers in the

United Kingdom

A moulded plug complying with BS

1363 is fitted to this equipment for

your safety and convenience.

Should the fuse in the plug supplied

need to be replaced, same rating fuse

approved by ASTA or BSI to BS 1362,

(i.e. marked with

or mark)

must be used.

If the plug supplied with this

equipment has a detachable fuse

cover, be sure to attach the fuse

cover after you change the fuse.

Never use the plug without the fuse

cover. If you should lose the fuse

cover, please contact your nearest

Sony service station.

About this manual

The design of the speakers of CFD-

V10 and CFD-910 differs depending

on the area the model is marketed.

The one marketed in the UK and

Italy is the model used for

illustration purposes.

Precautions

On safety

• As the laser beam used in the CD

player section is harmful to the eyes,

do not attempt to disassemble the

casing. Refer servicing to qualified

personnel only.

• Should any solid object or liquid fall

into the player, unplug the player,

and have it checked by qualified

personnel before operating it any

further.

On power sources

• For AC operation, check that the

player’s operating voltage is identical

with your local power supply (See

“Specifications”) and use the

supplied AC power cord; do not use

any other type. The voltage selector is

located at the bottom of the player

(only for the models equipped with

the VOLTAGE SELECTOR at the

bottom).

• The player is not disconnected from

the AC power source (mains) as long

as it is connected to the wall outlet,

even if the player itself has been

turned off.

• For battery operation, use six size D

(R20) batteries.

• When the batteries are not to be used,

remove them to avoid damage that

can be caused by battery leakage or

corrosion.

• The nameplate indicating operating

voltage, power consumption, etc. is

located at the bottom.

On placement

• Do not leave the player in a location

near heat sources, or in a place

subject to direct sunlight, excessive

dust or mechanical shock.

• Do not place the player on an inclined

or unstable place.

• Do not place anything within 10 mm

of the side of the cabinet. The

ventilation holes must be

unobstructed for the player to operate

properly and prolong the life of its

components.

• If the player is left in a car parked in

the sun, be sure to choose a location

in the car where the player will not be

subjected to the direct rays of the sun.

•Since a strong magnet is used for the

speakers, keep personal credit cards

using magnetic coding or spring-

wound watches away from the player

to prevent possible damage from the

magnet.

On operation

•If the player is brought directly from

a cold to a warm location, or is placed

in a very damp room, moisture may

condense on the lenses inside the CD

player section. Should this occur, the

player will not operate properly. In

this case, remove the CD and wait

about an hour for the moisture to

evaporate.

•If the player has not been used for a

long time, set it in the playback mode

to warm it up for a few minutes

before inserting a cassette.

If you have any questions or problems

concerning your player, please consult

your nearest Sony dealer.

Notes on CDs

•Before playing, clean the CD with a

cleaning cloth. Wipe the CD from the

center out.

•Do not use solvents such as benzine,

thinner, commercially available

cleaners or anti-static spray intended

for vinyl LPs.

•Do not expose the CD to direct

sunlight or heat sources such as hot

air ducts, nor leave it in a car parked

in direct sunlight as there can be a

considerable rise in temperature

inside the car.

•Do not stick paper or sticker on the

CD, nor scratch the surface of the CD.

•After playing, store the CD in its case.

If there is a scratch, dirt or fingerprints

on the CD, it may cause tracking error

Pinch roller

Record/playback head

Lens

Capstan

Erase head

Use the AC power source whenever you record since recording

consumes much power.

Connecting the AC power cord

Insert one end of the supplied AC power cord to the AC IN socket at the

rear of the player, and the other end to the wall outlet.

Tip

Replace the batteries when the OPR/BATT indicator dims or when the

player stops operating. Replace all the batteries with new ones. Before you

replace the batteries, be sure to take out the CD from the player.

Using the player on batteries

Insert six R20 (size D) batteries (not

supplied) into the battery compartment.

To use the player on batteries, disconnect

the AC power cord from the player.

Adjusting the voltage (only

for the models equipped

with VOLTAGE SELECTOR at

the bottom)

Be sure to set the VOLTAGE

SELECTOR (at the bottom) to your

local power supply.

Tip

Only for the customers supplied

with an AC plug adaptor:

Use the supplied AC plug adaptor if

the plug of the AC power cord does

not match your outlet.

CD player section

System

Compact disc digital audio system

Laser diode properties

Material: GaAlAs

Wave length: 780 nm

Emission duration: Continuous

Laser output: Less than 44.6 µW

(This output is the value measured at a

distance of about 200 mm from the

objective lens surface on the optical

pick-up block with 7 mm aperture.)

Spindle speed

200 r/min (rpm) to 500 r/min (rpm)

(CLV)

Number of channels

2

Frequency response

20 - 20,000 Hz +1/-2 dB

Wow and flutter

Below measurable limit

Radio section

Frequency range

Europe,Italy and Korea

FM

Europe and Korea

87.6 - 107 MHz

Italy 87.5 - 108 MHz

Central and 65 - 108 MHz

Eastern Europe

AM

Europe and Korea

531 - 1,602 kHz

Italy

526.5 - 1,606.5 kHz

Saudi Arabia and other countries

FM Saudi Arabia 87.6 - 107 MHz

Tourist model 76 - 108 MHz

Other countries 87.6 - 108 MHz

or 87.6 - 107 MHz

AM Tourist model 530 - 1,629 kHz

Other models 530 - 1,605 kHz

or 531 - 1,602 kHz

IF

FM: 10.7 MHz

AM: 455 kHz

Aerials

FM: Telescopic aerial

AM: Built-in ferrite bar aerial

Cassette-corder section

Recording system

4-track 2 channel stereo

Fast winding time

Approx. 120 s (sec.) with Sony

cassette C-60

Frequency response

TYPE I (normal): 70 - 10,000 Hz

General

Speaker

Full range: 10 cm dia., 2.8 ohms, cone

type (2)

Outputs

Headphones jack (stereo minijack)

For 16 - 68 ohms impedance

headphones

Maximum power output

(excluding Korean

model)

2.5 W + 2.5 W

Power output (Korean model)

1.6 W + 1.6 W (at 2.8 ohm, 10 %

harmonic distortion in AC operation)

Power requirements

Europe

230 V AC, 50 Hz

Korea

220 V AC, 60 Hz

Other countries

110 - 120 V, 220 - 240 V AC selectable

50/60 Hz or 230 V AC, 50 Hz

9 V DC, 6 R20 (size D) batteries

Power consumption

Korean model: AC 15 W

Other models: AC 20 W

Battery life

For CD radio cassette-corder:

FM recording

Sony R20P: approx. 13.5 h

Sony alkaline LR20: approx. 20 h

Tape playback

Sony R20P: approx. 7.5 h

Sony alkaline LR20: approx. 15 h

CD playback

Sony R20P: approx. 2.5 h

Sony alkaline LR20: approx. 7 h

Dimensions

Approx. 425 × 160 × 246 mm (w/h/d)

(16

3

⁄4

×

6

3

⁄8

×

9

3

⁄4

inches)

(incl.

projecting parts)

Mass

Approx. 4 kg (8 lb. 13 oz) (incl.

batteries)

Supplied accessory

AC power cord (1)

Design and specifications are subject to

change without notice.

Optical accessories

Sony MDR headphone series

CFD-V10

CFD-910

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Sony CFD-V10 Stereoanlage zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Sony zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Sony CFD-V10 Stereoanlage in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Sony Stereoanlage
Weitere Anleitungen von Stereoanlage

Verwandte Produkte

Bedienungsanleitung

Sony CMT-DX400 Stereoanlage

Bedienungsanleitung

Sony CMT-EP50 Stereoanlage

Bedienungsanleitung

Sony MHC-RG100 Stereoanlage

Bedienungsanleitung

Sony CMT-SBT20 Stereoanlage

Bedienungsanleitung

Sony MHC-RG30 Stereoanlage

Bedienungsanleitung

Sony CMT-CP100 Stereoanlage

Bedienungsanleitung

Sony CMT-CP101 Stereoanlage

Bedienungsanleitung

Sony CMT-CPZ2 Stereoanlage

Verwandte Kategorien