Bedienungsanleitung Ryobi RHT1850H25HS Heckenschere

Bedienungsanleitung

3 English |

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

UK

TR

■ Do not operate in poor lighting. The operator requires a

clear view of the work area to identify potential hazards.

■ Ensure all handles and guards are fitted when using

the hedge trimmer. Never attempt to use an incomplete

hedge trimmer or one fitted with an unauthorised

modification.

■ Ensure before each use that all controls and safety

devices function correctly. Do not use the product if the

“off” switch does not stop the product.

■ Inspect the product before each use. Check for loose

fasteners. Make sure all guards and handles are

properly and securely attached. Replace any damaged

parts before use. Check for battery pack leaks.

■ Do not modify the product in any way.

■ Wear full eye and hearing protection while operating the

product. If working in an area where there is a risk of

falling objects, head protection must be worn.

■ Wear heavy, long trousers, boots, and gloves. Do not

wear loose fitting clothing, short trousers, jewellery of

any kind, or use with bare feet.

■ Secure long hair so it is above shoulder level to prevent

entanglement in moving parts.

■ Use of hearing protection reduces the ability to hear

warnings (shouts or alarms). The operator must pay

extra attention to what is going on in the working area.

■ Operating similar tools nearby increases both the risk

of hearing injury and the potential for other persons to

enter your working area.

■ Do not use the product when you are tired, ill, or under

the influence of alcohol, drugs, or medication.

■ Keep firm footing and balance. Do not overreach.

Overreaching can result in loss of balance and can

result in serious injury.

■ Keep all parts of your body away from any moving part.

■ Before starting the product, make sure the cutting

blades will not come in contact with anything.

■ While operating the hedge trimmer, always hold it firmly

with both hands by the two handles. Ensure that the

operating position is safe and secure. The manufacturer

does not recommend the use of steps or ladders. If

higher trimming is required, use an extended-reach

tool.

■ Blades are sharp. When handling the blade assembly,

wear non-slip, heavy duty, protective gloves. Do not

place your hand or fingers between blades or in any

position where they could get pinched or cut. Never

touch the blade or service the products unless the

battery pack is removed or the product has been

disconnected from any power supply.

■ Switch off and remove the battery pack or disconnect

from the power supply. Make sure all move parts have

come to a complete stop:

● before leaving the product unattended

● before cleaning or clearing a blockage

● before adjusting the working position of the cutting

means

● before checking, conducting maintenance, or

working on the product

■ Do not force the product through heavy shrubbery. This

can cause the blades to bind and slow down. If the

blades slow down, reduce the pace.

■ Do not attempt to cut stems or twigs that are larger

than

22 mm thick, or those obviously too large to feed

into the cutting blade. Use a non-powered hand saw or

pruning saw to trim large stems.

■ Do not operate the product with damaged or excessively

worn blades.

WARNING

If the product is dropped, suffers heavy impact, or begins

to vibrate abnormally, immediately stop the product and

inspect for damage or identify the cause of the vibration.

Any damage should be properly repaired or replaced by

an authorised service centre.

■ Electrical power should be supplied via a residual

current device (RCD) with a tripping current of not more

than 30 mA.

■ If you need to use an extension cable, ensure it is

suitable for outdoor use and has a current capacity

sufficient to supply your product. Check it before every

use for damage. Always uncoil it during use because

coiled cables can overheat.

■ Before every use, examine the supply cord for damage.

If there are signs of damage, it must be replaced by

a qualified person at an authorised service centre to

avoid a hazard.

OVERLOAD PROTECTION

The product has an overload protection device that is

activated when overheating or when a current spike occurs,

automatically shutting down power within the product. To

resume operation, disconnect the product from the power

supply, wait for about 15 minutes, and reconnect the

product to the power supply.

ADDITIONAL BATTERY SAFETY WARNINGS

WARNING

To reduce the risk of fi re, personal injury, and product

damage due to a short circuit, never immerse your

tool, battery pack or charger in fl uid or allow a fl uid to

fl ow inside them. Corrosive or conductive fl uids, such

as seawater, certain industrial chemicals, and bleach

or bleach-containing products, etc., can cause a short

circuit.

TRANSPORTATION AND STORAGE

■ Stop the product, disconnect from the power supply

or remove the battery, and allow both to cool before

storing or transporting

■ Clean all foreign material from the product. Store it in a

cool, dry, and well-ventilated place that is inaccessible

to children. For extra safety, store the battery separately

from the hedge trimmer. Keep away from corrosive

agents such as garden chemicals and de-icing salts.

Do not store outdoors.

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Ryobi RHT1850H25HS Heckenschere zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Ryobi zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Ryobi RHT1850H25HS Heckenschere in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Ryobi Heckenscheren
Weitere Anleitungen von Heckenscheren

Häufig gestellte Fragen zu Ryobi RHT1850H25HS Heckenschere

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Ryobi RY36HTX65A Heckenschere

Bedienungsanleitung

Ryobi OHT1845 Heckenschere

Bedienungsanleitung

Ryobi RHT1850XLiS Heckenschere

Bedienungsanleitung

Ryobi RY18HT50A Heckenschere

Bedienungsanleitung

Ryobi RHT7565RL Heckenschere

Bedienungsanleitung

Ryobi RHT2660R Heckenschere

Bedienungsanleitung

Ryobi RHT6060RS Heckenschere

Bedienungsanleitung

Ryobi RHT1850Li Heckenschere

Verwandte Kategorien