Bedienungsanleitung Philips GC1022 EasySpeed Bügeleisen

Bedienungsanleitung

ENGLISH

General description (Fig. 1)

1 Spray nozzle

2 Capofllingopening

3 Steam control

- CALC CLEAN = Calc-Clean function

- t=dryironing

- ECO = optimal steam

- ; = maximum steam

-

= turbo steam

4 Steam boost button

5 Spray button

6 Temperature dial

7 Temperaturelight

8 Mains cord

9 Type plate

10 WatertankwithMAXwaterlevelindication

11 Soleplate

Using the appliance

Filling the water tank

Note: Your appliance has been designed to be used with tap water. If you live in an area with very hard water,

fast scale build-up may occur. In this case, it is recommended to mix 50% distilled water and 50% tap water to

prolong the lifetime of your appliance.

Note: Do not put perfume, vinegar, starch, descaling agents, ironing aids, chemically descaled water or other

chemicals in the water tank.

1 Set the steam control to position t (dry ironing). (Fig. 2)

2 Fill the water tank up to the MAX indication (Fig. 3).

3  Closethecapofthellingopening.

Selecting temperature and steam setting

Table 1

Fabric type Temperature

setting

Steam

setting

Steam

boost

Spray

Linen MAX

;,

Ye s Yes

Cotton

3

;,

Ye s Ye s

Wool

2

ECO No Ye s

Silk

1

t No No

Syntheticfabrics

(e.g.acrylic,nylon,

polyamide, polyester).

1

t No No

1 Consult table 1 to set the temperature dial to the appropriate setting for your garment (Fig. 4).

2 Put the iron on its heel and plug it in. The temperature light goes on to indicate that the iron is

heating up (Fig. 5).

3 When the temperature light goes out, the iron has reached the correct temperature.

4 Consult table 1 to select a steam setting that corresponds to the temperature you have set (Fig. 6).

Note: To use turbo steam

, keep the steam control pressed to the turbo steam position continuously.

Caution: Do not set the steam control to a steam setting if the set temperature is below 2 or when

the iron is still heating up (when the temperature light is on). Otherwise water may leak from the iron.

Features

Spray function

- Pressthespraybuttontomoistenthearticletobeironed.Thishelpsremovestubborncreases(Fig.7).

Steam boost function

- Pressandreleasethesteamboostbuttonforapowerfulboostofsteamtoremovestubborn

creases(Fig.8).

Vertical steam

-

Youcanusethesteamboostfunctionwhenyouholdtheironinverticalpositionforremovingcreases

fromhangingclothes,curtainsetc(Fig.9)

.

ECO steam setting

- SelecttheECOsteamsettinginsteadofthemaximumsteamsetting;tosaveenergy,yettoachieve

satisfactoryironingresults.(Fig.10)

Dry ironing

- Setthesteamcontroltot(dryironing)toironwithoutsteam.(Fig.2)

Cleaning and maintenance

Cleaning

1 Set the steam control to t (dry ironing), unplug the iron and let it cool down. (Fig. 2)

2 Pour any remaining water out of the water tank.

3  Wipeakesandanyotherdepositsoffthesoleplatewithadampclothandanon-abrasive(liquid)

cleaning agent.

Caution: To keep the soleplate smooth, avoid hard contact with metal objects. Never use a scouring pad,

vinegar or other chemicals to clean the soleplate.

Note: Regularly rinse the water tank with tap water. Empty the water tank after rinsing it.

Calc-Clean function

IMPORTANT: To prolong the lifetime of your appliance and to maintain good steaming

performance, use the Calc-Clean function once every two weeks. If the water in your area

is very hard (i.e. when akes come out of the soleplate during ironing), use the Calc-Clean

function more frequently.

1 Make sure the appliance is unplugged and the steam control is set to t (dry ironing). (Fig. 2)

2 Fill the water tank to the MAX indication. (Fig. 3)

Do not pour vinegar or other descaling agents into the water tank.

3 Plug in the iron and set the temperature dial to MAX (Fig. 11).

4 Unplug the iron when the temperature light goes out.

5  Holdtheironoverthesink.PushthesteamcontroltotheCalc-Cleanpositionandholdit.(Fig.12)

6 Gently shake the iron until all water in the water tank has been used up (Fig. 13).

Caution:Whilescaleisushedout,steamandboilingwateralsocomeoutofthesoleplate.

7 Set the steam control back to t (dry ironing). (Fig. 2)

Note: Repeat the Calc-Clean process if the water that comes out of the iron still contains scale particles.

After the Calc-Clean process

1 Plug in the iron. Let the iron heat up to let the soleplate dry.

2 Unplug the iron when the temperature light goes out.

3 Move the iron gently over a piece of cloth to remove any water stains on the soleplate.

4 Let the iron cool down before you store it.

Storage

1 Unplug the iron and set the steam control to t (dry ironing). (Fig. 2)

2 Wind the mains cord round the cord storage facility and store the iron on its heel (Fig. 14).

Troubleshooting

Thischaptersummarisesthemostcommonproblemsyoucouldencounterwiththeappliance.Ifyou

areunabletosolvetheproblemwiththeinformationbelow,visitwww.philips.com/supportforalistof

frequentlyaskedquestionsorcontacttheConsumerCareCentreinyourcountry(seetheworldwide

guaranteeleaetforcontactdetails).

Problem Possible cause Solution

Waterdripsfromthe

soleplate or wet spots

appearonthegarment

duringironing.

Thesettemperatureistoo

lowforsteamironing.

Setanironingtemperaturethatis

suitableforsteamironing.Seetable1.

Youhaveputanadditivein

thewatertank.

Rinsethewatertankanddonotputany

additiveinthewatertank.

Thesteamboostfunction

does not work properly

(waterleaksoutofthe

soleplate).

Youhaveusedthesteam

boost function too often

withinaveryshortperiod.

Waitawhilebeforeyouusethesteam

boostfunctionagain.

Youhaveusedthesteam

boost function at a too low

temperature.

Setanironingtemperatureatwhich

thesteamboostfunctioncanbeused

( 2toMAX).

Flakesandimpuritiescome

outofthesoleplateduring

ironing.

Hardwaterformsakes

insidethesoleplate.

UsetheCalc-Cleanfunction(seechapter

‘Cleaningandmaintenance’,section

‘Calc-Cleanfunction’).

Waterdripsfromthe

soleplateaftertheironhas

cooleddownorhasbeen

stored.

Youhaveputtheironin

horizontalpositionwhile

therewasstillwaterinthe

water tank.

Emptythewatertankandsetthesteam

controltoposition‘dry’afteruse.Store

theirononitsheel.

Waterleaksfromthecapof

thellingopening.

Youhaveoverlledthe

water tank.

Donotllthewatertankbeyondthe

MAXindication.Pourexcesswaterout

ofthewatertank.

WhenIpushthesteam

controltotheturbosteam

position,thesteamcontrol

jumps back.

Youdidnotkeepthesteam

controlintheturbosteam

position.

Ifyouwanttouseturbosteam,youhave

tokeepthesteamcontrolintheturbo

steampositioncontinuously.Forother

steamsettings,thisisnotnecessary.

DEUTSCH

Allgemeine Beschreibung (Abb. 1)

1 Spraydüse

2 VerschlusskappederEinfüllöffnung

3 Dampfregler

- CALC CLEAN=Calc-Clean-Funktion

- t=trockenesBügeln

- ECO = optimaler Dampf

- ; = starker Dampf

-

= Turbodampf

4 Dampfstoß-Taste

5 Sprühtaste

6 Temperaturregler

7 Temperaturleuchte

8 Netzkabel

9 Typenschild

10 WasserbehältermitWasserstandsanzeigeMAXfürmaximaleFüllmenge

11 Bügelsohle

Das Gerät benutzen

Den Wasserbehälter füllen

Hinweis: Ihr Gerät ist für die Verwendung von Leitungswasser vorgesehen. Wenn Sie in einer Region mit sehr

hartem Wasser leben, können sich schnell Kalkablagerungen bilden. In diesem Fall wird empfohlen, den

Wasserbehälter zu 50 % mit destilliertem Wasser und zu 50 % mit Leitungswasser zu füllen, um die Lebensdauer

Ihres Geräts zu verlängern.

Hinweis: Geben Sie weder Duftstoffe, Essig, Wäschesteife, Entkalkungsmittel, Bügelzusätze, chemisch entkalktes

Wasser noch andere Chemikalien in den Wasserbehälter.

1 Stellen Sie den Dampfregler auf die Position t (trockenes Bügeln). (Abb. 2)

2  FüllenSiedenWassertankbiszurMAX-MarkierungmitWasser(Abb.3).

3 Schließen Sie die Verschlusskappe der Einfüllöffnung.

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Philips GC1022 EasySpeed Bügeleisen zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Philips zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Philips GC1022 EasySpeed Bügeleisen in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Philips Bügeleisen
Weitere Anleitungen von Bügeleisen

Häufig gestellte Fragen zu Philips GC1022 EasySpeed Bügeleisen

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Philips GC4934 Azur Advanced Bügeleisen

Bedienungsanleitung

Philips GC6704 Bügeleisen

Bedienungsanleitung

Philips GC4501 Bügeleisen

Bedienungsanleitung

Philips GC9622 Bügeleisen

Bedienungsanleitung

Philips GC6709 Bügeleisen

Bedienungsanleitung

Philips GC9140 Bügeleisen

Bedienungsanleitung

Philips PSG6042 PerfectCare Bügeleisen

Bedienungsanleitung

Philips DST2010 Bügeleisen

Verwandte Kategorien