Bedienungsanleitung Papermonster S92 Aktenvernichter

Bedienungsanleitung

IMPORTANT SAFETY NOTES

<< Danger of injury! Keep all

loose articles of clothing, ties,

jewelery, long hair or other loose

objects away from opening!

<< Danger of injury! Never insert fingers into

opening!

<< Danger of injury! Do not spray and flam-

mable liquids or gases into the inlet open

-

ing!

<< In case of danger switch the machine off

with the mains switch, or with the emer

-

gency switch, or unplug the machine!

<< Always unplug the machine from the

mains power supply before opening the

machine!

<< The machine may not be operated by more

than one person at any given time!

The machine was designed for safe operation

by “one person only”.

<< During the shredding process no other

work may be performed on the machine

(for example cleaning, etc.)!

<< The machine is not a toy, and is not suitable

for use by children!

The overall technical safety concept of

this machine (dimensions, feed openings,

emergency shutdown devices etc.) does not

provide for any guarantee regarding hazard-

free operation by children.

<< Repairs may only be performed by trained

personnel!

3

GB

S92

EMPTYING THE RECEPTACLE:

- Turn the function switch (1) (fig. 1) in position

„OFF“.

- Take the machine and lift it up.

- The receptacle can be emptied easily.

- After the machine has been reset onto the

receptacle, you can continue shredding.

SCOPE OF APPLICATION:

The document shredder

papermonster S92

is a machine for the destruction of common written

material.

The unit should only be fed with pa

-

per!

Shredding other types of materials can

cause injuries (e.g. by splinters of hard

materials) or may damage the shredder

(e.g. destruction of the cutting system).

INSTALLATION:

- Take the machine and put it onto the receptacle

(trip switch at the back).

- Plug in the machine (for instructions for the ne

-

cessary precautions see „TECHNICAL DATA“.

To disconnect the machine from the

power supply system, please unplug

the power plug.

The socket outlet shall be installed

near the equipment and shall be easily

accessible!

Only operate the machine in enclosed

rooms at temperatures between 10°C

and 25°C!

EXPLANATION OF THE CONTROLS:

1 = Function switch (fig. 1)

(automatic / off / reverse)

This switch is for the following functions:

- position „AUTO“

machine is ready for operation

- position „OFF“

machine is switched off

- position „REV“

cutting system runs in reverse

2 = Sensor (forward run) (fig. 2)

The shredding operation is started as soon

as a sheet of paper passes through the feed

slot.

3 = Auxiliary switch (fig. 2)

(forward run, manual)

Operate this switch to put the cutting system

in forward mode.

The shredder may not be used as a step

ladder or as a seat. Danger of falling

due to breakage!

FEEDING THE PAPER:

- Turn the function switch (1) (fig. 1) in position

„AUTO“.

- Feed paper through the inlet guide to the cutting

system.

- Machine switches automatically to forward

and draws paper in. The machine switches off

automatically after shredding.

Never feed the shredder with a quantity

of paper exceeding the maximum indi

-

cated in the technical details!

Should the machine be overfed, follow the

instructions under „PAPER JAM“.

OPERATION

TECHNICAL DATA

Cutting width: 7,2 mm

Cutting capacity: 6 sheets (70 g/m

2

)

6 sheets (80 g/m

2

)

Supply voltage: see name plate

Pre-fusing: 10 amps (slow-blow)

Working width: 220 mm

Noise generation: 66-67 dB(A)

Power: see name plate

Intermittent operation: 2 min ON

40 min OFF

Dimensions (WxDxH): 290x132x307 mm

Weight: approx. 1,7 kg

MALFUNCTIONS / MAINTENANCE

PAPER JAM:

If too much paper is fed to the cutting system the

cutting system will jam. Proceed as follows:

- Turn the function switch (1) (fig. 1) briefly to

position „REV“, then in position „OFF“.

- Cutting system runs in reverse, frees excess

paper and stops.

- Tear off the excess paper over the feed slot

and then turn the function switch (1) (fig. 1) to

position „AUTO“.

- The cutting system runs forward and cuts the

remainding paper left in the cutting system.

- Contnue the shredding process with less pa

-

per.

MOTOR PROTECTION:

The motor shuts down automatically, should it

become overloaded. Turn the function switch in

position „OFF“.

Allow the motor to cool down for 35-40 minutes

(depending upon room temperature) and then

continue shredding.

CHECKLIST IN CASE OF MALFUNCTIONS:

If the device does not function, check the follo

-

wing:

- Is the plug connected to the mains?

- Is the

function switch (1) on?

- Is there a

paper jam?

Follow the instructions under „PAPER JAM“.

- has the motor been overloaded?

Wait until the motor has cooled, and then re-

start.

If none of the above applies, contact your

dealer.

INITIATION

DISPOSING OF THE MACHINE:

Dispose of the machine in an

environmentally sound fashion at the end

of its useful service life. Do not dispose of

any of the parts included in the machine

or its packaging with household trash.

DISPOSING

fig. 1

fig. 2

2

1

3

Translation of the Original Operation Manual

Übersetzung der Originalbetriebsanleitung

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Papermonster S92 Aktenvernichter zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Papermonster zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Papermonster S92 Aktenvernichter in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Papermonster Aktenvernichter
Weitere Anleitungen von Aktenvernichter

Häufig gestellte Fragen zu Papermonster S92 Aktenvernichter

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Papermonster L160 Aktenvernichter

Bedienungsanleitung

Papermonster L163 Aktenvernichter

Bedienungsanleitung

Papermonster L220 CC Aktenvernichter

Bedienungsanleitung

Papermonster M110 Aktenvernichter

Bedienungsanleitung

Monolith C185-C Aktenvernichter

Bedienungsanleitung

EBA 6340 C Aktenvernichter

Bedienungsanleitung

Rexel Auto+ 300X Aktenvernichter

Bedienungsanleitung

Olympia CC 415.4 Aktenvernichter

Verwandte Kategorien