21
SAFETY WARNINGS
Read and understand the operating instructions
before using the appliance.
Familiarise with the control
elements and how to use the appliance properly. Abide by
all the safety measures stated in the service manual. Act
responsibly toward third parties.
The operator is responsible for accidents or risks to third
parties.
In case of any doubts about connection and operation
refer please to our customer center
You can also download these instructions in digital form
on the internet on our homepage.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions.Failure to follow the warnings
and instructions may result in electric shock, re
and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool“ in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluered or dark
areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while
operang a power tool. Distracons can cause you
to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
condions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
e) When operang a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
f) If operang a power tool in a damp locaon is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operang a power tool. Do
not use a power tool while you are red or under
the inuence of drugs, alcohol or medicaon. A
moment of inaenon while operang power tools
may result in serious personal injury.
b) Use personal protecve equipment. Always wear
eye protecon. Protecve equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protecon used for appropriate condions will
reduce personal injuries.
c) Prevent unintenonal starng. Ensure the switch
is in the o-posion before connecng to power
source and/or baery pack, picking up or carrying
the tool. Carrying power tools with your nger on
the switch or energising power tools that have the
switch on invites accidents.
d) Remove any adjusng key or wrench before
turning the power tool on. A wrench or a key le
aached to a rotang part of the power tool may
result in personal injury.
e) Do not overreach. Keep proper foong and balance
at all mes. This enables beer control of the
power tool in unexpected situaons.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
g) If devices are provided for the connecon of dust
extracon and collecon facilies, ensure these
are connected and properly used. Use of dust
collecon can reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power
tool for your applicaon. The correct power tool
will do the job beer and safer at the rate for which
it was designed.
b) Do not use the power tool if the switch does not
turn it on and o. Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
c) Disconnect the plug from the power source and/
or the baery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools. Such prevenve safety
measures reduce the risk of starng the power tool
accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instrucons to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condion that may aect the power
tool’s operaon. If damaged, have the power tool
EN
ENGLISH
Diskutieren Sie über dieses Produkt mit
Hier können Sie uns Ihre Meinung zu OKAY ALS 2020 Laubblaser mitteilen. Wenn Sie eine Frage haben, lesen Sie zunächst das Bedienungsanleitung sorgfältig durch. Die Anforderung eines Bedienungsanleitung kann über unser Kontaktformular erfolgen.