Bedienungsanleitung Makita DF010DSP Bohrschrauber

Bedienungsanleitung

5

3. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

4. If electrolyte gets into your eyes, rinse them out

with clear water and seek medical attention right

away. It may result in loss of your eyesight.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any

conductive material.

(2) Avoid storing battery cartridge in a container

with other metal objects such as nails, coins,

etc.

(3) Do not expose battery cartridge to water or

rain.

A battery short can cause a large current flow,

overheating, possible burns and even a

breakdown.

6. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50°C (122°F).

7. Do not incinerate the battery cartridge even if it

is severely damaged or is completely worn out.

The battery cartridge can explode in a fire.

8. Be careful not to drop or strike battery.

9. Do not use a damaged battery.

10. Follow your local regulations relating to disposal

of battery.

SAVE THESE INSTRUCTIONS.

Tips for maintaining maximum battery life

1. Charge the battery cartridge before completely

discharged.

Always stop tool operation and charge the

battery cartridge when you notice less tool

power.

2. Never recharge a fully charged battery cartridge.

Overcharging shortens the battery service life.

3. Charge the battery cartridge with room

temperature at 10°C – 40°C (50°F – 104°F). Let a

hot battery cartridge cool down before charging

it.

4. Charge the battery cartridge once in every six

months if you do not use it for a long period of

time.

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before adjusting or

checking function on the tool.

Installing or removing battery cartridge (Fig. 1)

• Always switch off the tool before insertion or removal of

the battery cartridge.

• To remove the battery cartridge, withdraw it from the

tool while pressing the buttons on both sides of the

cartridge.

• To insert the battery cartridge, align the tongue on the

battery cartridge with the groove in the housing and slip

it into place. Always insert it all the way until it locks in

place with a little click. If not, it may accidentally fall out

of the tool, causing injury to you or someone around

you.

• Do not use force when inserting the battery cartridge. If

the cartridge does not slide in easily, it is not being

inserted correctly.

Lock button (Fig. 2)

When the lock button is in the locked position B, the

switch can not be actuated.

When the lock button is in the unlocked position A, the

switch can be actuated.

Switch action (Fig. 3)

CAUTION:

• Before inserting the battery cartridge into the tool,

always check to see that the switch actuates properly

and returns to the “OFF” position when released.

To start the tool, first move the lock button to the

unlocked position A to release the switch. And then

simply push the switch on the

D C side for the clockwise

rotation and the

E D side for the counterclockwise

rotation. Release the switch to stop.

CAUTION:

• Always check the direction of rotation before operation.

• Change the direction only after the tool comes to a

complete stop. Changing the direction of rotation

before the tool stops may damage the tool.

• When not operating the tool, always place the lock

button in the locked position .

Adjust grip (optional accessory) (Fig. 4, 5 & 6)

You can adjust fastening torque with the adjust grip.

1. Insert the pins of the adjusting grip into the holes on

the adjusting ring.

2. Turn the adjusting grip slowly until you feel the tips

of the pins fit into the socket inside the adjusting

ring.

3. To increase torque, turn the adjusting grip clockwise

as viewed from the bit sleeve. To reduce torque, turn

the adjusting grip counterclockwise.

NOTICE:

• Do not turn the adjust grip too tight. Otherwise the tool

may be damaged.

The clutch is designed not to slip when the adjusting grip

is fully turned clockwise.

Before actual operation, drive a trial screw into your

material or a piece of duplicate material to determine

which torque level is required for a particular application.

Lighting up the front lamp (Fig. 7 & 8)

CAUTION:

• Do not look in the light or see the source of light

directly.

To turn on the light, slide the lamp switch to the A

position.

To turn off the light, slide the lamp switch to B position.

Even if you leave the lamp on, the light will automatically

turn off after 5 minutes.

Checking the remaining battery capacity,

auto-stop

The lamp signals by flickering when the battery power is

almost used up during use, and the tool automatically

stops.

At this time, recharge the battery or replace the battery

with a fully charged one.

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Makita DF010DSP Bohrschrauber zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Makita zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Makita DF010DSP Bohrschrauber in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Makita Bohrschrauber
Weitere Anleitungen von Bohrschrauber

Häufig gestellte Fragen zu Makita DF010DSP Bohrschrauber

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Makita DDF481 Bohrschrauber

Bedienungsanleitung

Makita BDF446 Bohrschrauber

Bedienungsanleitung

Makita M6002 Bohrschrauber

Bedienungsanleitung

Makita BHP343 Bohrschrauber

Bedienungsanleitung

Makita DDF480ZJ Bohrschrauber

Bedienungsanleitung

Makita HP457D Bohrschrauber

Bedienungsanleitung

Makita DDF451 Bohrschrauber

Bedienungsanleitung

Makita DDA350 Bohrschrauber

Verwandte Kategorien