Bedienungsanleitung Makita BHP460 Schlagbohrmaschine

Bedienungsanleitung

5. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50°C (122°F).

6. Do not incinerate the battery cartridge even if

it is severely damaged or is completely worn

out. The battery cartridge can explode in a fire.

7. Be careful not to drop, shake or strike battery.

8. Do not charge inside a box or container of any

kind. The battery must be placed in a well

ventilated area during charging.

ADDITIONAL SAFETY RULES

FOR TOOL

ENB023-1

1. Be aware that this tool is always in an operat-

ing condition, because it does not have to be

plugged into an electrical outlet.

2. Hold tool by insulated gripping surfaces when

performing an operation wherethe cutting tool

may contact hidden wiring. Contact with a

‘‘live’’ wire will make exposed metal parts of

the tool ‘‘live’’ and shock the operator.

3. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

4. Hold the tool firmly.

5. Keep hands away from rotating parts.

6. Do not leave the tool running. Operate the tool

only when hand-held.

7. Do not touch the bit or the workpiece immedi-

ately after operation; they may be extremely

hot and could burn your skin.

SAVE THESE INSTRUCTIONS.

OPERATING INSTRUCTIONS

Installing or removing battery cartridge

(Fig. 1)

•

Always switch off the tool before insertion or

removal of the battery cartridge.

•

To remove the battery cartridge, withdraw it from the

tool while sliding the button on the side of the

cartridge.

•

To insert the battery cartridge, align the tongue on

the battery cartridge with the groove in the housing

and slip it into place.Always insert it all the way until

it locks in place with a little click. If you can see the

red part on the upper side of the button, it is not

locked completely. Insert it fully until the red part

cannot be seen. If not, it may accidentally fall out of

the tool, causing injury to you or someone around

you.

•

Do not use force when inserting the battery car-

tridge. If the cartridge does not slide in easily, it is

not being inserted correctly.

Charging (Fig. 2)

1. Plug the battery charger into your power source. Two charging lights will flash in green color repeatedly.

2. Insert the battery cartridge into charger until it stops adjusting to the guide of charger. Terminal cover of

charger opens when inserting and closes when pulling out the battery cartridge.

3. When the battery cartridge is inserted, the charging light color will change from green to red and charging

will begin. The charging light will keep lighting up lit steadily during charging.

One red charging light indicates charged condition in 0 – 80% and two red ones indicates 80 – 100%.

4. With finish of charge, the charging lights will change from two red ones to two green ones.

The charging time is as follows:

Battery B2417: approx. 30 minutes.

Battery B2430: approx. 60 minutes.

5. If you leave the battery cartridge in the charger after the charging cycle is complete, the charger will switch

into its ‘‘trickle charge (maintenance charge)’’ mode which will last approximately 24 hours.

6. After charging, unplug the charger from the power source.

Battery type Capacity (mAh) Number of cells

B2417 1,700 20

B2430 3,000 20

Cooling system

•

This charger is equipped with cooling fan for heated battery in order to enable the battery to prove its own

performance. Sound of cooling air comes out during cooling, which means no trouble on the charger.

•

Yellow light will flash for warning in the following cases.

– Trouble on cooling fan

– Incomplete cool down of battery, such as, being clogged with dust

The battery can be charged in spite of the yellow warning light. But the charging time will be longer than usual

in this case.

Check the sound of cooling fan, vent on the charger and battery, which can be sometime clogged with dust.

•

The cooling system is in order although no sound of cooling fan comes out, if the yellow warning light is not

flashing.

BHP460 (E) (’100. 4. 19)

5

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Makita BHP460 Schlagbohrmaschine zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Makita zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Makita BHP460 Schlagbohrmaschine in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Makita Schlagbohrmaschinen
Weitere Anleitungen von Schlagbohrmaschinen

Häufig gestellte Fragen zu Makita BHP460 Schlagbohrmaschine

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Makita BHP446 Schlagbohrmaschine

Bedienungsanleitung

Makita HP1640 Schlagbohrmaschine

Bedienungsanleitung

Makita 8271D Schlagbohrmaschine

Bedienungsanleitung

Makita HP2020 Schlagbohrmaschine

Bedienungsanleitung

Makita 8270D Schlagbohrmaschine

Bedienungsanleitung

Makita M8301D Schlagbohrmaschine

Bedienungsanleitung

Makita HP2041 Schlagbohrmaschine

Bedienungsanleitung

Makita BHP451 Schlagbohrmaschine

Verwandte Kategorien