Bedienungsanleitung Magnat Quantum 1005 Lautsprecher

Bedienungsanleitung

Dear MAGNAT Customer,

Congratulations on your fine new loudspeakers and thank you very much for choosing MAGNAT! You have made an

excellent choice. The high-quality speakers produced by MAGNAT are renowned all over the world.

Please study the instructions and information below carefully before using your new loudspeakers.

GENERAL INFORMATION ABOUT CONNECTING YOUR MAGNAT QUANTUM 1000 LOUDSPEAKERS

Warning

: Only hi-fi amplifier loudspeaker outputs may be connected to the Quantum 1000 loudspeaker terminal.

Please always use a good quality loudspeaker connection cable from an audio dealer. To prevent impairment of sound

quality, we recommend cables with cross-sections of at least 2.5 mm² for lengths up to 3 m and at least 4 mm² for lengths

above 3 m.

Always turn off the amplifier or receiver before connecting or disconnecting loudspeaker cables. Place the loudspeakers in

their planned positions and cut the cables to the right length. The cables for both channels should always be exactly the

same length.

For good sound it is imperative that the cables must be connected in such a way that the speakers are “in phase”. This

means that the black negative terminals on the speakers (-) must be connected to the negative (-) terminals on the amplifier,

the red positive (+) speaker terminals to the positive (+) amplifier terminals. To make this easier one wire of most speaker

cables is marked with a coloured strip or a ridge in the insulation.

The Quantum 1000 terminal is designed for 3 cord sets:

Connection via banana plugs (fig. 1a)

Connection via clevis type fittings (fig. 1b)

Non-ready-made (fig. 1c):

Strip 10 – 15 mm of insulation from the ends of non-ready-made cables. Twist the ends – this is much better than tinning

them with solder – insert them in the terminals and tighten the terminal screws firmly.

Before switching on the system double-check all your connections and make sure that the terminal screws are tight and

that there are no short circuits caused by stray wire filaments – this could cause serious damage to your amplifier!

THE MAGNAT QUANTUM 1000 LOUDSPEAKERS IN STEREO MODE

In the ideal configuration the speakers and the listening position should form an equilateral triangle. When the left and right

speakers are the same distance from the listening position their sound arrives at the same time, resulting in a harmonious,

natural music reproduction. (Fig. 2)

There should be a clear line of sight between the loudspeakers and the listening position. Any sound-absorbing or reflecting

obstacles in the path will distort the sound. When you install the loudspeakers the following distances should be maintained:

at least 20 cm away from the rear wall and at least 30 cm from the side walls. This will prevent excessive emphasis of the

bass range.

SPIKES

You should use the supplied spikes. The spikes are height-adjustable and possess a counter nut.

Any irregularities in the floor may be offset and a firm stand may be achieved with the spikes. They also decouple the

loudspeakers from the base so that any undesirable resonance is avoided.

The spikes must be screwed into the threaded sleeves at the bottom of the box when the hard rubber feet have been

removed.

In order to prevent the floor from being damaged, you should get help from someone to tilt the box slightly when fitting the

spikes.

First, screw in two spikes next to each other and – before setting the box down – put the corresponding washers (rubber

facing down) in place. Then attach the two opposite spikes and lower accordingly.

Then align the box vertically and counter the spikes.

6

GB

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Magnat Quantum 1005 Lautsprecher zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Magnat zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Magnat Quantum 1005 Lautsprecher in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Magnat Lautsprecher
Weitere Anleitungen von Lautsprecher

Häufig gestellte Fragen zu Magnat Quantum 1005 Lautsprecher

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Magnat Monitor Supreme 2000 Lautsprecher

Bedienungsanleitung

Magnat Quantum Center 816 Lautsprecher

Bedienungsanleitung

Magnat Monitor S 70 Lautsprecher

Bedienungsanleitung

Magnat Signature 905 Lautsprecher

Bedienungsanleitung

Magnat Interior ICP 62 Lautsprecher

Bedienungsanleitung

Magnat Interior IWP 82 Lautsprecher

Bedienungsanleitung

Magnat Symbol X 160 Lautsprecher

Bedienungsanleitung

Magnat Vector 205 Lautsprecher

Verwandte Kategorien