Bedienungsanleitung Kinzo Ecoline Heissluftpistole

Bedienungsanleitung

3

A

4.2 Electrical safety

Always check that the power supply corresponds to the voltage on the rating plate.

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs

with earthed (grounded) power tools. Unmodied plugs and matching outlets will reduce risk of electric

shock.

• Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is earthed or grounded.

• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of

electric shock.

• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord

away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric

shock.

• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suit-

able for outdoor use reduces the risk of electric shock.

• If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected

supply. Use of an RCD reduces the risk of electric shock.

4.3 Personal safety

• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a

power tool when you are tired or under the inuence of drugs, alcohol or medication. A moment of inat-

tention when operating a power tool may result in serious personal injury.

• Use safety equipment. Always wear eye protection. Using safety equipment such as a dust mask, non-skid

safety shoes, a hard hat, or hearing protection whenever it is needed will reduce the risk of personal injury.

• Avoid accidental starts. Ensure the switch is in the o position before inserting the plug. Carrying power

tools with your finger on the switch or plugging in power tools when the switch is in the on position

makes accidents more likely.

• Remove any adjusting keys or spanners before turning on the power tool. A spanner or key left attached to

a rotating part of the power tool may result in personal injury.

• Do not reach out too far. Keep your feet rmly on the ground at all times. This will enable you retain control

over the power tool in unexpected situations.

• Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from the

power tool. Loose clothes, jewellery or long hair can become entangled in the moving parts.

4.4 Power tool use and care

• Do not expect the power tool to do more than it can. Use the correct power tool for what you want to do.

A power tool will achieve better results and be safer if used in the context for which it was designed.

• Do not use the power tool if the switch cannot turn it on and o. A power tool with a broken switch is

dangerous and must be repaired.

• Disconnect the plug from the power source before making adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

• Store power tools, when not in use, out of the reach of children and do not allow people who are not fa-

miliar with the power tool or these instructions to operate it. Power tools are potentially dangerous in the

hands of untrained users.

• Maintenance. Check for misalignment or jammed moving parts, breakages or any other feature that might

aect the operation of the power tool. If it is damaged, the power tool must be repaired. Many accidents

are caused by using poorly maintained power tools.

• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less

likely to jam and are easier to control.

• Use the power tool, accessories and cutting tools, etc., in accordance with these instructions and in the

manner intended for the particular type of power tool, taking into account the working conditions and the

work which needs to be done. Using a power tool in ways for which it was not intended can lead to poten-

tially hazardous situations.

4.5 Service

Your power tool should be serviced by a qualied specialist using only standard spare parts. This will ensure

that it meets the required safety standards.

72168 Manual.indd 3 31-12-10 15:12

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Kinzo Ecoline Heissluftpistole zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Kinzo zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Kinzo Ecoline Heissluftpistole in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Kinzo Heissluftpistolen
Weitere Anleitungen von Heissluftpistolen

Häufig gestellte Fragen zu Kinzo Ecoline Heissluftpistole

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Beta 1850B Heissluftpistole

Bedienungsanleitung

Dedra DED7970 Heissluftpistole

Bedienungsanleitung

Fuxtec FX-E1HLP20 Heissluftpistole

Bedienungsanleitung

Stanley FME670K-QS SFM Heissluftpistole

Bedienungsanleitung

Parkside PHLGD 2000 A1 Heissluftpistole

Bedienungsanleitung

Skil 8005 MA Heissluftpistole

Bedienungsanleitung

AEG BHG 180 Heissluftpistole

Bedienungsanleitung

FERM HAM1010 Heissluftpistole

Verwandte Kategorien