Bedienungsanleitung Inventor CLCO290-09BS Klimagerät

Bedienungsanleitung

6 EN

1. Transport of equipment containing

ammable refrigerants See transport

regulations

2. Marking of equipment using signs See local

regulations

3. Disposal of equipment using ammable

refrigerants See national regulations.

4. Storage of equipment/appliances

The storage of equipment should be in

accordance as per the user’s manual.

5. Storage of packed (unsold) equipment

The storage of the package should be

constructed in such a manner that if any

mechanical damage to the equipment will not

result ina leak of the refrigerant.

6. Information on Servicing

1) Checking the area

Upon initial work, regarding systems

containing ammable refrigerants, mandatory

safety checks are required to ensure that the

risk of possible ignition is minimized. Prior to

any repairing to the refrigerant system, the

following

2) Work procedure

Any handling should be performed under a

controlled procedure as to minimize the risk

of ammable gas being present while work is

being performed.

3) General work area

All relative maintenance sta and all others

working in the area, should be clearly

instructed, on the nature of the procedure.

Any maintenance in conned spaces must

be avoided. The space around the work-area

should be securely sectioned o. Conrm that

the conditions within the area, are safe and the

ammable material is controlled.

4) Prior to and during work operation, the

area should be checked and monitored by an

appropriate refrigerant detector, also ensuring

the technicians to be aware of potentially

ammable materials in the atmosphere. It is

very important that the refrigerant detector

being used is suitable for the usage with

ammable refrigerants.

5)Presence of re extinguisher

If any work that involves heat, is to be

conducted, the appropriate re extinguishing

equipment should be always available. A dry

powder or CO2 re extinguisher should be

available adjacent to the charging area.

6) No ignition sources

Work that is in relation to a refrigeration

system which involves exposing any pipe works

that contains or has contained ammable

refrigerant gases should be carried out be

no persons, as they may lead to the risk of a

re.All possible re hazards such as cigarette

smoking, must be kept far away from the site

of repair,installation removing and or disposal,

where the possibility of refrigerant gas may

be released to the atmosphere. Prior to the

performance of any work conducted, the area

around the equipment should be monitored

and checked to be certain that no ammable

hazards or ignition risks are present. NO

SMOKING signs are mandatory and must be

displayed..

7) Ventilated area

Prior to any work performed, be certain that

the area is well ventilated or open. Constant

ventilation while any work is carried out is

necessary. Ventilation should safely disperse

any possible refrigerant leak externally into the

atmosphere.

8) Checks to the refrigeration equipment

Where electrical components are being

changed, they should be t for purpose and

with the correct specications. Manufacturer’s

maintenance and Service Guidelines should

be followed at all times. If there is any doubt,

please consult with the manufacturer’s

Technical Debt for assistance. The following

checks should always be performed in regard

to installations using ammable refrigerants:

The charge size is in accordance with the room

size, in which the refrigerant parts are installed.

Be certain the ventilation is operative and check

the outlets do not have any obstructions.

If there is a use of an indirect refrigerant

circuit, this secondary circuit should be

checked for any refrigerant being present. Any

markings to the equipment should be clear

and visible. Markings and signs that are not

clear should be corrected. Any refrigeration

pipe or components should be installed in

such a manner as to never be exposed to any

substance that may lead to the corrosion of

the refrigerant containing components, unless

these components are designed as resistant to

possible corrosion, or are corroded resistant.

9) Checks to electrical devices

|Warnings (for using R290/R32 refrigerant only)

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Inventor CLCO290-09BS Klimagerät zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Inventor zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Inventor CLCO290-09BS Klimagerät in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Inventor Klimageräte
Weitere Anleitungen von Klimageräte

Häufig gestellte Fragen zu Inventor CLCO290-09BS Klimagerät

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Inventor V7DI-50WiFiR Klimagerät

Bedienungsanleitung

Inventor SUVO-12 Klimagerät

Bedienungsanleitung

Inventor DR2VO32-09 Klimagerät

Bedienungsanleitung

Inventor U7RT-50 Klimagerät

Bedienungsanleitung

Inventor V7CI-50WiFiR Klimagerät

Bedienungsanleitung

Inventor V7DI-24WiFiR Klimagerät

Bedienungsanleitung

Inventor SVI32-12WFI Klimagerät

Bedienungsanleitung

Inventor K2VO32-12 Klimagerät

Verwandte Kategorien