Bedienungsanleitung Hudora 28247 Inline skates

Bedienungsanleitung

CHANGING ROLLERS AND BEARINGS PICTURE 1

1. Roller | 2. Spacer | 3. Ball Bearing | 4. Axle Winding | 5. Axle Screw

Wheels and bearings are available as accessories and can be changed independent of each other if they

wear out or get damaged. While changing the wheels, keep in mind that bearing needs to be removed from

the old wheels and attached to the new ones. Refer to Illustration 1 for better understanding and remem-

ber to properly fasten the axle screw and secure with locking varnish. Your inline skates have precision

bearings that have been filled with lubricant under high pressure at the production plant. This is why your

skates move easily and quickly with just a little pressure while skating. Like the wheels, the bearings also

need to be replaced when they stop working properly. However, never dismantle them!

HOW TO ADJUST THE SIZE PICTURE 2

To adjust the size, loosen the lacing and powerstrap and release the adjustment lever on the heel of the

shoe. Push the lever backwards. Now you can adjust the size by turning the lever until you have set it to the

right size. Shoe sizes are indicated where the front end of the sole meets the wheel mounting. After adjust-

ing the skate, don’t forget to fasten the lever once again until you hear it click into place. (Only for 28244-49:

Replace the soles according to the set size to improve the fit). Then check the correct fit. The firm fit of the

skate on the foot should be checked regularly.

EXCHANGING OR ADJUSTING THE HEEL BRAKE PICTURE 3

6. Heel Brake Block | 7. Heel Brake

Frequent braking or complete braking wear out the stoppers. If the stopper has lowered from its position,

it needs to be replaced. Loosen the stopper from the stopper holder with the key and remove it. Position the

new stopper carefully and retighten the Allen screw. The free space between the lower edge of the stopper

and the skating surface must be between 7-17 mm. As far as possible, let an experienced person replace the

stopper.

MAINTENANCE AND STORAGE

Use a dry or damp cloth only to clean the product; do not use special cleaning agents! Check the product for

damage or traces of wear and tear before and after each use. Do not make any structural changes. For your

own safety, please use original spare parts only. These can be sourced from HUDORA. If parts become dam-

aged or if sharp edges or corners should develop, the product may not be used any more. If in any doubt,

please contact our service team (http://www.hudora.de). Store the product in a safe place where it is pro-

tected from the elements, cannot be damaged, and cannot injure anyone.

DISPOSAL ADVICE

At the end of the product’s life, please dispose of it at an appropriate collection point provided in your area.

Local waste management companies will be able to answer your questions on this.

SERVICE

We make every effort to deliver faultless products. If faults do arise however, we put just as much effort into

rectifying them. Therefore, you can find numerous information on the product, replacement parts, solu-

tions to problems and lost assembly manuals at http://www.hudora.de.

4/12

CONGRATULATIONS ON PURCHASING THIS PRODUCT!

Please read these instructions carefully. The instructions are an integral component of the product. There-

fore, please store them and the packaging carefully in case questions arise in the future. Please always in-

clude these instructions when handing on the product to a third party. This product must be assembled by

an adult. This product is designed for private/domestic use only. This product is not designed for commer-

cial/industrial use. The use of the product requires certain capabilities and skills. Always adjust according to

the age of the user and use for the purpose it has been designed for.

TECHNICAL SPECIFICATIONS

Item: Leisure inline skates Mia / Leon | Mia 2.0 / Leon 2.0

Item numbers: 28132, 28133 / 28232, 28241 | 28244 / 28247

Sizes 29-32, 64 x 22 mm, ABEC 5

Class B: Inline skates designed for users with 20 to 60 kg weight

and a foot length up to 260mm.

28134, 28136 / 28236, 28242 | 28245 / 28248

Sizes 33-36, 70 x 22 mm, ABEC 5

Class B: Inline skates designed for users with 20 to 60 kg weight

and a foot length up to 260mm.

28137, 28140 / 28240, 28243 | 28246 / 28249

Sizes 37-40, 76 x 22 mm, ABEC 5

Class A: Inline skates designed for users with 20 to 100 kg weight.

Purpose: Inline skates for recreational sports.

If you have trouble getting the product ready for use or need additional product information, please visit

our website http://www.hudora.de, where you will find answers to all of your questions.

CONTENTS

1 Pair of adjustable inline skates

1 Spare stopper

3 pairs of extra soles in storage bag (only for 28244-49)

1 Usage instructions

Other parts which may be included with the delivery in some circumstances are not required.

SAFETY INSTRUCTIONS

WARNING! Always use complete safety gear, since like many comparable sports, inline skating is a sport

with relatively high risk of injury. Always wear a hand and wrist guard, knee and elbow pads and reflecting

clothes and a helmet while skating. However, please remember that wearing complete safety gear cannot

guarantee 100% protection. HUDORA also provides protectors, helmets and reflecting products. For more

information, visit our http://www.hudora.de/.

Use the skates only on suitable surfaces that are smooth, clean, dry and as free from traffic as possible. Al-

ways give due consideration to other traffic and remember that there are restrictions for inline skaters in

the Road Traffic Ordinance. Do not make any changes in the inline skates that may compromise safety. The

self-locking effect of self-securing nuts and axles can reduce due to frequent loosening and tightening of

the connecting links. Remove sharp edges resulting from usage immediately. Regular inspections, mainte-

nance, and servicing increase the safety and life of your skates. Before you begin, always check that all

connecting links and locking pieces are properly fastened and whether the stopper still has enough mate-

rial and has not worn out!

SKATING TECHNIQUE

Every beginning is difficult and the most accidents take place for the ‘beginners’ within the first ten min-

utes. Be very careful during this phase! Take a few steps with toes pointing forwards because this how you

will push off from the ground. Balance on one foot. Better skills at doing this will make skating and braking

easier later. Be careful – inline skates can reach unexpected speeds. Now practise on clean, level tarmac.

Stand straight on your skates with your feet parallel and about six inches apart. Slowly raise your arms

forward and bend your knees till your shin is in contact with the boot. Let your body weight pass through

the balls of your feet. Beginners often mistakenly stand straight, keeping knees too stiff and putting their

weight on the heels. Avoid all streets that are steep, have traffic on them or have difficult surfaces. Select

the difficulty of the roads and surfaces according to your level of expertise. Moisture, sand and dirt damage

the wheels and bearings. The next step to learn is turning. Get comfortable with the feel of the edge by

tilting the skates outwards and inwards while you are still standing. Use your hip and knees to do this. Now

try to do this while you are skating. You will experience a greater pressure on the inside of your foot while

turning, which is why you must always lean a little inwards.

BRAKING TECHNIQUE

Learn how to brake. If you want to stand you can just roll to a halt. Pros also do that. You can of course brake

with stoppers as well: lift your right foot’s toes slightly so that the stopper touches the ground at the back.

The more pressure you put, the quicker you will decrease the speed. Avoid full brakes because then you may

not have complete control. Always skate with foresight!

All images are examples of the design.

EN INSTRUCTIONS ON ASSEMBLY AND USE

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Hudora 28247 Inline skates zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Hudora zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Hudora 28247 Inline skates in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Hudora Inline skates
Weitere Anleitungen von Inline skates

Verwandte Produkte

Bedienungsanleitung

Hudora 37342-43 Inline skates

Bedienungsanleitung

Hudora 28132-40 Inline skates

Bedienungsanleitung

Hudora 28140 Inline skates

Bedienungsanleitung

Hudora 28450-51 Inline skates

Bedienungsanleitung

Hudora 37730-37 Inline skates

Bedienungsanleitung

Hudora 37130-41 Inline skates

Bedienungsanleitung

Hudora 28232-40 Inline skates

Bedienungsanleitung

Hudora 37330-37 Inline skates

Verwandte Kategorien