Bedienungsanleitung Hoover DVE01BL 011 Staubsauger

Bedienungsanleitung

3

WARNING:Itisrecommendedtoavoidpotentialscratchingofwoodenoorsthat

thepedalisnotsetonHardoormodeandtheslideronDeepcarpetcleaning.

Usingtheexitubewithaccessories:

The exi tube gives you the maximum exibility of usage. It can be used alone or

combined with the accessories, as desired. To vacuum with the supplied accessories:

1. Select accessory mode by rotating the carry handle/accessory mode activator to

accessory position until locked in position. [6]

2. Remove the exi tube from the location in the back of the cleaner handle. [7]

3. To use the extension tube: remove the tube from the door by unclipping from the

top. [8] Attach to the exitube. [10a]

4. To use the dusting brush: remove the tool from the location in the body of the

product by pressing the middle of the component [9a] then unclipping from the top.

[9b] Attach to the exitube. [10b]

5. To return to oor vacuuming push the oor mode button. [11]

IMPORTANT - When using cleaning tools, the cleaner must be kept in the upright

position, and held. It must not be used in the stand alone position without the user holding

the product. [12]

CLEANER MAINTENANCE

EMPTYING THE DUST BIN ASSEMBLY *

a) Lay the cleaner on a at surface, pull back the door release button and remove the

transparent door. [13]

b) Remove the bin assembly. [14]

c) Remove the bin top cover assembly from the container, by rotating the container and

bin top cover in opposite directions. [15]

d) Empty the debris from the container into a bin. [16] Check if it is necessary to clean

the relative lters, as described in the “Maintaining the lters” section.

e) Ret bin top cover to container assemble the dust container and lter assembly to the

product ensuring you keep the container ribs aligned with the cleaner body as shown

[20b], once aligned push dust bin assembly fully into position.

NOTE: Hoover recommends to inspect and wash if necessary, the mesh and the lters

after each full container, see maintaining lters section.

MAINTAINING THE FILTERS *

a) To access the washable HEPA lter, rotate the mesh lter assembly in the opposite

direction from the bin top cover. [15b]

b) Remove the mesh and remove all dust and debris, wash mesh if required but ensure

it is dry before retting. [17a]

c) Gently tap the lter to remove any excess dust and if required wash the HEPA lter

*Certain Models Only ** Certain models only, nozzles may vary according to model

thoroughly under hand warm water until water runs clear. [17b]

d) Remove excess water by shaking and leave to dry for 24 hours. [18] Ret lters to the

cleaner only when completely dry.

e) When retting the lter ensure mesh is assembled correctly as per [8d] then reassemble

lter to bin top cover [19b] and nally t to container ensuring correct alignment. [19a]

f) To ret the dust container and lters assembly to the product [21], ensure you keep the

container ribs aligned with the cleaner body as shown [20b], once aligned push dust bin

assembly fully into position.

DONOTUSEHOTWATERORDETERGENTS.

IMPORTANT: Ensure the bagless lters, mesh and HEPA, are tted before use.

ACCESSORIES

To obtain the best performance and efciency it is recommended that the correct nozzles

are used for the main cleaning operations. These nozzles are indicated in the diagrams

by the letters GP, HF or CA.

A nozzle type GP can be used to clean both carpet and hard oor.

A nozzle type HF is suitable for use only on hard oor.

A nozzle of type CA is suitable for use only on carpet.

The other nozzles are accessories for specialist cleaning tasks and are recommended

for occasional use only.

All accessories can be tted to the end of the handle or the end of the telescopic tube.

Parquet Nozzle* – For parquet oors and other delicate oors.

Mini Turbo Nozzle* – Use the mini turbo nozzle on stairs or for deep cleaning on textile

surfaces and other hard to clean areas. Particularly suitable for allergen removal.

IMPORTANT: Do not use the turbo and mini turbo nozzles on rugs with long fringes,

animal hides and carpet pile deeper than 15mm. Do not keep the nozzle stationary while

the brush is rotating.

GB

USER CHECKLIST

Should you have a problem with your product, complete the simple user checklist before

calling the Hoover customer service.

• Is there a working electricity supply to the product? Check with another electrical

product.

• Is the dust bin full? Inspect and empty.

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Hoover DVE01BL 011 Staubsauger zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Hoover zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Hoover DVE01BL 011 Staubsauger in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Hoover Staubsauger
Weitere Anleitungen von Staubsauger

Häufig gestellte Fragen zu Hoover DVE01BL 011 Staubsauger

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Hoover HF201H 011 Staubsauger

Bedienungsanleitung

Hoover HE721PAF 011 Staubsauger

Bedienungsanleitung

Hoover DV16 011 Staubsauger

Bedienungsanleitung

Hoover BV50HM 011 Staubsauger

Bedienungsanleitung

Hoover HF110H 011 Staubsauger

Bedienungsanleitung

Hoover HF916BF 011 Staubsauger

Bedienungsanleitung

Hoover HE310HM 021 Staubsauger

Bedienungsanleitung

Hoover HF1P10PX 011 Staubsauger

Verwandte Kategorien