Bedienungsanleitung Hoover BV71_BV20011 Staubsauger

Bedienungsanleitung

ASSEMBLING YOUR CLEANER

Remove all components from the packaging.

1. Connect the hose to the cleaner main body, ensuring it clips and locks into position. [1]

To release: simply press the two buttons on the hose end and pull. [1]

2. Connect the tube upper end to the handle. [2].

3. Connect the tube lower end to the carpet and oor nozzle**.[3]

USING YOUR CLEANER

1. Extract power cord and plug it into the power supply. Do not pull the cord beyond the

red marker. [4]

2. Adjust the length of telescopic tube by moving the telescopic tube adjuster up, and raise

or lower the handle to the most comfortable cleaning position. [5]

3. Carpet and Floor Nozzle**: Press the oor type selector pedal* on the nozzle to select

the ideal cleaning mode for the oor type. [6]

Hard Floor: The brushes are lowered to protect the oor

Carpet: With lifted brushes for the deepest clean

4. Switch the cleaner on by pressing the on/off button on the cleaner main body. [7]

5. Adjust the suction regulator to the desired level. [8]

6. Switch off at the end of use by pressing the on/off button. Unplug and press the cord

rewind button to wind the power cord back into the cleaner. [9]

7. Packing and storage – The tube can be parked for temporary storage while in use, or

in the storage position when not in use. [10]

CLEANER MAINTENANCE

Replacing the Dust Bag

If the bag check indicator is red please check and, if necessary, replace the bag.

1. Lift the bag door release latch [11] to open the bag door. Pull the bag holder [12] and

pull the bag collar to remove the bag. [13]

2. Apply the peel and seal sticker, located on the bag collar, to the bag inlet. The full dust

bag should be disposed of correctly and carefully.

3. Fold a new bag as shown on the bag and t by inserting the collar into the bag holder. [13]

4. Ret the bag holder and close the bag door.

WARNING: The bag door will NOT close if the dust bag and/or the bag holder are not

assembled to the cleaner. Always ensure the bag and bag holder are present when closing

the bag door.

Remember: The bag check indicator may also be red if an obstruction has occurred. In

this case, refer to ‘Removing a blockage from the system’.

Cleaning the Filters

To maintain optimum performance of your cleaner, please wash the lters after each 5

bag changes.

Cleaning the pre-motor lter:

1. Lift the bag door release latch [11] to open the bag door and remove the bag. [12]

2. To remove the pre-motor lter, slide the pre-motor lter frame from the cleaner. [14]

3. Remove the lter from the holder. [15]

4. Wash it in hand warm water [18], and allow it to dry thoroughly before replacing it in

the cleaner. [19]

Cleaning the exhaust lter:

1. To remove the exhaust lter, unclip the exhaust lter cover [16] and remove the exhaust

lter pack. [17]

2. Wash the lter in hand warm water [18] and allow it to dry thoroughly before replacing

it in the cleaner. [19]

Remember: Do not use hot water or detergents. In the unlikely event of the lters

becoming damaged, t a genuine Hoover replacement. Do not try and use the product

without a dust bag or lter tted.

Cleaning the permanent cloth dust bag*:

To maintain optimum performance we recommend that you wash the permanent cloth dust

bag under hand warm water after every 5 full bags. Remove excess water and leave to

dry fully before replacing.

Removing a Blockage From The System

If the bag check indicator is red:

1. Check if the bag is full. If so refer to ‘Replacing the dust bag’.

2

*Certain Models Only ** Certain models only, nozzles may vary according to model

GETTING TO KNOW YOUR CLEANER

A. On/Off Button

B. Bag Door

C. Telescopic Tube Adjuster

D. Telescopic Tube

E. Suction Regulator

F. Hose Handle

G. Hose

H. Bag Check Indicator

I. Cord Rewind Button

J. Exhaust Filter Cover

K. 2 in 1 Tool

L. Floor Type Selector*

M. Carpet and Floor Nozzle (GP) **

M1. Carpet Nozzle (CA) **

M2. Hard Floor Nozzle (HF) **

N. Main Cleaner

O. Bag Door Release Latch

P. Bag Holder

Q. Pre-motor Filter Frame

R. Pre-motor Filter

S. Exhaust Filter

T. Pet Hair Remover Mini Turbo Nozzle*

U. Allergy Remover Mini Turbo Nozzle*

V. Parquet Nozzle*

GB

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Hoover BV71_BV20011 Staubsauger zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Hoover zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Hoover BV71_BV20011 Staubsauger in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Hoover Staubsauger
Weitere Anleitungen von Staubsauger

Häufig gestellte Fragen zu Hoover BV71_BV20011 Staubsauger

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Hoover HF103X 011 Staubsauger

Bedienungsanleitung

Hoover HF110H 011 Staubsauger

Bedienungsanleitung

Hoover TX40PET 011 Staubsauger

Bedienungsanleitung

Hoover HF920P 001 Staubsauger

Bedienungsanleitung

Hoover HF322TP 011 Staubsauger

Bedienungsanleitung

Hoover HF522STHE011 Staubsauger

Bedienungsanleitung

Hoover S4434 AquaPlus Staubsauger

Bedienungsanleitung

Hoover HP320PET 011 Staubsauger

Verwandte Kategorien