Bedienungsanleitung Heco METAS XT 501 Lautsprecher

Bedienungsanleitung

Dear HECO Customer,

Congratulations on your fine new loudspeakers and thank you very much for choosing HECO! You have

made an excellent choice. The high-quality speakers produced by HECO are renowned all over the world.

Please study the instructions and information below carefully before using your new loudspeakers.

GENERAL INFORMATION ABOUT CONNECTING YOUR HECO METAS XT LOUDSPEAKERS

Please always use a good quality loudspeaker connection cable from an audio dealer. To prevent

impairment of sound quality, we recommend cables with cross-sections of at least 2.5 mm² for lengths up

to 3 m and at least 4 mm² for lengths above 3 m.

Always turn off the amplifier or receiver before connecting or disconnecting loudspeaker cables. Place

the loudspeakers in their planned positions and cut the cables to the right length. The cables for both

channels should always be exactly the same length.

Strip 10 – 15 mm of insulation from the ends of the cables. Twist the ends – this is much better than tinning

them with solder – insert them in the terminals and tighten the terminal screws firmly (fig. 1). Loudspeaker

cables with CE-compliant banana or single-pin plugs (4 mm) or forked fittings can also be used.

For good sound it is imperative that the cables must be connected in such a way that the speakers are

“in phase”. This means that the black negative terminals on the speakers (-) must be connected to the

negative (-) terminals on the amplifier, the red positive (+) speaker terminals to the positive (+) amplifier

terminals. To make this easier one wire of most speaker cables is marked with a coloured strip or a ridge

in the insulation.

Before switching on the system double-check all your connections and make sure that the terminal screws

are tight and that there are no short circuits caused by stray wire filaments – this could cause serious

damage to your amplifier!

HECO METAS XT - BI-WIRING AND BI-AMPING

Connector panel on the Heco Metas XT loudspeakers:

The connector panels on the Metas XT speakers are equipped with 5 terminal screws, enabling bi-

wiring/bi-amping in addition to conventional connection to an amplifier. The upper terminals are connected

to the treble and mid-treble side of the crossover and the lower terminals to the bass side. An additional

connector terminal enables a 2 dB treble boost option.

Bi-wiring means using separate cables to carry the high and low audio frequencies. Bi-amping takes this

idea one step further and uses separate power amplifiers as well as separate cables for high and low

frequencies. Bi-amping in particular produces an additional improvement in sound reproduction quality.

For conventional connections, metal bridges are installed as standard to make the +2 dB treble adjustment

active. The bridge can be switched to the linear setting by unscrewing the corresponding terminals.

(Fig. 2)

The terminals have to be removed for bi-wiring and bi-amping mode. Fig. 3 and fig. 4 show the connection

to the amplifier(s).

The right treble setting depends on the room, the positioning of the speakers and, of course, personal

taste. The +2 dB setting is recommended for rooms with heavy upholstered furniture and curtains, for

example, which have a muffling effect.

THE HECO METAS XT 301, 501 AND 701 IN STEREO MODE

In the ideal configuration the speakers and the listening position should form an equilateral triangle. When

the left and right speakers are the same distance from the listening position their sound arrives at the same

time, resulting in a harmonious, natural music reproduction.

GBGB

6

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Heco METAS XT 501 Lautsprecher zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Heco zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Heco METAS XT 501 Lautsprecher in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Heco Lautsprecher
Weitere Anleitungen von Lautsprecher

Häufig gestellte Fragen zu Heco METAS XT 501 Lautsprecher

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Heco VICTA 300 Lautsprecher

Bedienungsanleitung

Heco CELAN 500 Lautsprecher

Bedienungsanleitung

Heco VICTA 201 Lautsprecher

Bedienungsanleitung

Heco VICTA CENTER 100 Lautsprecher

Bedienungsanleitung

Heco CELAN XT 701 Lautsprecher

Bedienungsanleitung

Heco CELAN XT 501 Lautsprecher

Bedienungsanleitung

Heco VICTA 301 Lautsprecher

Bedienungsanleitung

Heco VICTA 701 Lautsprecher

Verwandte Kategorien