Bedienungsanleitung GBC CombBind C210E Bindegerät

Bedienungsanleitung

5

G

Guarantee

Operation of this machine is guaranteed for two years from date of

purchase, subject to normal use. Within the guarantee period, ACCO

Brands Europe will at its own discretion either repair or replace the

defective machine free of charge. Defects due to misuse or use for

inappropriate purposes are not covered under the guarantee. Proof

of date of purchase will be required. Repairs or alterations made by

persons not authorised by ACCO Brands Europe will invalidate the

guarantee. It is our aim to ensure that our products perform to the

specifications stated. This guarantee does not affect the legal rights

which consumers have under applicable national legislation governing

the sale of goods.

Register this product online at www.accoeurope.com

Binding

Your machine has been fitted with a GuideRight™ paper alignment tray

(fig.1). This ensures accurate A4 punching every time.

1

To turn the machine “ON” press the ON / OFF (I/O) switch located in

the rear of the machine. A green light will illuminate to indicate that

the power is on.

2

Measure document using colour coded guide (fig.2)

Open the lid of the machine and rest your document (including any

cover sheets you have chosen) against the lid on the ‘staging’ area

provided. Gently push the document back against the lid and check

the document size using the colour coded guide on the staging area.

You can leave your document on the staging area in readiness to

punch.

3

Select comb which fits your document (fig.3)

Use the comb size guide to select the size of comb that fits your

document i.e. 25 sheet document = 6mm comb.

4

Load comb onto machine (fig.4)

Insert the binding comb next to the white positional arrow on the

machine, behind the metal comb support fingers, with the open side

of the comb pointing upwards.

Note: If using GBC ProCombs™ the coloured line on your comb

should align to the coloured arrows on the machine for faster

binding.

5

Open comb by turning lever towards you (fig.5)

The coloured arrows adjacent to the opening comb act as a guide

as to how far to open in order to allow punched sheets to be easily

inserted.

Rotate the binding handle towards you to open the hooks away from

the comb support.

6

Jog or align the sheets or covers and insert the edge to be punched

into the punch throat opening.

7

Fully insert the sheets into the throat opening and against the edge

guide (fig.6).

8

To punch, press the punch button

. The CombBind C210E will

punch up to 15 sheets of 80 gsm paper. Do not punch more than 1

clear cover at a time to prevent jams.

9

If the punch jams the red jam light

will illuminate (fig.5)

to indicate that the machine has jammed. The machine will

automatically reverse the punches to clear the jam and the red jam

light will remain illuminated. Remove the paper and push the punch

button to re-set the machine. The red jam light will turn off indicating

that the machine is ready to punch. Reduce some of the sheets and

repeat steps 2 to 4 to avoid jams on additional lifts.

J

Place the front cover (finished side down) onto the opened binding

element fingers. Place the document pages (face down) onto the

element. Repeat for larger documents as required. Place the back

cover (finished side up) on the open binding element fingers last.

K

Rotate the binding lever away from you, back to its original position

to close the binding element.

L

Remove the book by lifting upward. Your document is now complete.

M

Once you become familiar with your CombBind C210E you will find

that you can bind as you punch, increasing your productivity.

N

When finished punching turn the machine OFF by pressing the ON /

OFF (I/O) switch located at the rear of the machine.

Quickstep Guide 1-2-3 (fig.10)

The QuickStep Guide label on the machine is a quick reference guide to

how to bind in three quick and simple steps.

1

Understand the comb size required by measuring on the document

size area 1, select the appropriate ProComb.

2

Load the ProComb with the dot to the left and open until you see the

coloured arrow.

3

Punch and load your document on to the spine until your document

is complete. Close the spine.

ZipComb spine (fig.9)

The ZipComb spine allows you to create an easily editable document

with comb punch orientation.

1

Place the adaptor on to the metal teeth.

2

Place the spine into the zip holder as shown in fig. 9.

3

Load and punch paper as per 'Binding' section 6-8.

4

Load punched paper on to spine.

5

Remove document and spine, close the ZipComb using the zipper

included in the ZipComb boxes.

6

Complete by flipping the back cover around the spine, for a

professional finish where the spine is hidden.

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr GBC CombBind C210E Bindegerät zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, GBC zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres GBC CombBind C210E Bindegerät in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für GBC Bindegeräte
Weitere Anleitungen von Bindegeräte

Verwandte Produkte

Bedienungsanleitung

GBC CombBind C12 Bindegerät

Bedienungsanleitung

GBC ClickBind C150E Bindegerät

Bedienungsanleitung

GBC MultiBind 230 Bindegerät

Bedienungsanleitung

GBC ThermaBind T500Pro Bindegerät

Bedienungsanleitung

GBC WireBind W18 Bindegerät

Bedienungsanleitung

GBC ClickBind 15 Bindegerät

Bedienungsanleitung

GBC CombBind C150Pro Bindegerät

Bedienungsanleitung

GBC WireBind W20 Bindegerät

Verwandte Kategorien