Bedienungsanleitung FERM PDM1026 Schlagbohrmaschine

Bedienungsanleitung

Ferm 45

• Always compare the maximum rotation speed of

accesoires with the maximum speed of the

percussion drill.

• Pull the mainsplug from the socket before you

change a drill or accessory.

WHEN OPERATING THE MACHINE:

• Check if the switch is placed in the ‘OFF’-position

before you connect the machine to mains.

• Keep the mains cable away from moving parts of the

machine.

• First switch off the machine before you move the

machine downwards along your body.

• Never cover the ventilation slots.

IMMEDIATELY SWITCH OFF THE

MACHINE IN CASE OF:

• Excessive sparking of the brushes and verticiliosis in

the collector.

• Malfunction of the mainsplug, -socket or damaged

cables.

• Broken switch.

• Smoke or smell caused by scorched insulation.

3. BEFORE OPERATING THE

MACHINE

Use only sharp drills of the following types

Fig.B

Concrete/masonry

|

Hard metal

Metal

|

HSS

Wood

|

HSS

MOUNTING ACCESSORIES

Fig.C

Prior to mounting an accessory always unplug the

tool.

Placing and removing bits

In addition to bits the machine can also hold screw bits

with a hexagonal shaft.This is done as follows:

• Hold the drill head (A) and slide the ring (B) in the

direction of the drilling machine.

• Place the shaft of the bit in the nesting place of the

drill chuck. Tighten the bit by holding ring B and

turning the drill head (A).

• Once the bit has been tightened in, slide ring B in the

direction of the drill head. This will stop the drill head

from loosening due to vibration during use.

• Slide the sidegrip over the drillhead.

• Slide the measuring rod in the sidegrip and tighten

the grip by turning the sidegrip.

• Tighten the workpiece to a workbench by using a

clamp.

• When all preparations are done the machine can be

connected to mains. First check if the switch is in the

‘OFF’-position and if the rotationswitch is in the

RIGHT-position.

4. OPERATION

THE ON/OFF SWITCH

Fig.D

• Switch the machine on by pressing the triggerswitch

(A). When you release the triggerswitch (A) the

machine will turn off.

SWITCH-LOCK

• You can lock the On/Off switch by pressing the

triggerswitch (A) and then pressing knob (B). Release

the switch-lock by pressing the triggerswitch (A)

shortly.

SPEED-CONTROL

• The rotation-speed can be continuously adjusted

between 0 and 2500 rotations per minute, by

pressing the switch (A) deeper or less deep.

ADJUSTING OF THE MAXIMUM

ROTATIONSPEED

• Switch the machine on by pressing triggerswitch (A).

• Lock the triggerswitch (A) by pressing knob (B).

• Adjust the speed by turning the small wheel (C) to

the desired maximum rotation speed.

SWITCHING THE DIRECTION OF

ROTATION

• Direction of rotation counter-clockwise: shift

switch (D) to “L”.

• Direction of rotation clockwise: shift switch (D) to

“R”.

SWITCH FOR PERCUSSION DRILLING

Fig.E

• Slide the switch to the “Drill” symbol for normal

drilling.

• Slide the switch to the “Hammer” symbol for

percussion drilling.

MALFUNCTION

Below we have listed a number of possible causes and

corresponding solutions in case the machine does not

function as it should:

1. Excessive sparkling

• This usely indicates dirt in the motor or worndown

carbon brushes.

- Bring your percussion drill to your Ferm-dealer.

2. The percussion drill is overheating

• The ventilationslots are covered with dirt.

- Clean them with a dry cloth.

• The percussion drill is overloaded.

- Use the machine for work for which it is ment to be.

- Replace the drill for a sharp one or sharpen the drill by

using a benchgrinder and a twist drill grinding

attachment.

• The motor is defect.

- Bring your percussion drill to your Ferm-dealer for

repairance.

4 Ferm

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr FERM PDM1026 Schlagbohrmaschine zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, FERM zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres FERM PDM1026 Schlagbohrmaschine in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für FERM Schlagbohrmaschinen
Weitere Anleitungen von Schlagbohrmaschinen

Häufig gestellte Fragen zu FERM PDM1026 Schlagbohrmaschine

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

FERM PDM1016 Schlagbohrmaschine

Bedienungsanleitung

FERM PDM1001 Schlagbohrmaschine

Bedienungsanleitung

FERM PDM1051 Schlagbohrmaschine

Bedienungsanleitung

FERM CDM1079 Schlagbohrmaschine

Bedienungsanleitung

FERM PDM1003 Schlagbohrmaschine

Bedienungsanleitung

FERM PDM1002 Schlagbohrmaschine

Bedienungsanleitung

FERM PDM1020 Schlagbohrmaschine

Bedienungsanleitung

FERM PDM1005 Schlagbohrmaschine

Verwandte Kategorien