Bedienungsanleitung Electrolux E8SI1-6DBM Renew 800 Bügeleisen

Bedienungsanleitung

6 www.electrolux.com

ENGLISH

Thank you for choosing an Electrolux product. In order to ensure the best results, always use original Electrolux

accessories and spare parts. They have been designed especially for your product. This product is designed with

the environment in mind. All plastic parts are marked for recycling purposes.

It may be possible that your steam iron does not produce steam immediately after lling it with water. The reason for

this is that air trapped in the inner system can delay this function a few seconds. Please be patient and try it again by

pressing the steam on/o button. For your convenience the steam will be produced after you release the steam on/

o button for a few seconds and it is not necessary to press the button all the time. Find out your rhythm for the best

steaming result.

COMPONENTS

A. Hot soleplate indicator

B. Water spray nozzle

C. Light indicator for heat-up/cool-down

D. Headlight illuminating ironing area

E. Touch screen for temperature-steam programme

selection

F. Reminder for Flush Clean & replacing Soft Water

Activator

G. Steam jet button

H. Spray button

I. Steam on/o button

J. Power cord

K. Flush Clean button

L. Soft Water Activator, replaceable

M. Water tank with max level indicator

N. Cord wrap facility

O. RESILIUM anodized ski-sloped soleplate

P. Water ll & Water Softener System cover

Q. Iron heel

R. Water lling container

Picture page 2-4

GETTING STARTED AND OPERATING INSTRUCTIONS

1 Before rst use. Remove all adhesive remains and gently rub with a dampened cloth. Rinse water tank to

remove foreign particles. Position the steam iron horizontally on the ironing-board or on a heat resistant, secure

surface at the same height as an ironing-board. Unwind and straighten the power cord.

2 Fill the steam iron with water. Make sure, the plug is outside the power outlet. Raise the heel of the iron, open

the lling aperture cover (P). Use the water lling container provided (R), pour water to maximum level (M). Close

the cover (P). This product is appropriate for use with tap water. It is recommended to use Electrolux AquaSense

ltered water resp. a mix of 50% distilled, 50% tap water if the tap water is particularly hard.

Always rell the water tank to MAX level using cold water.

Caution! Never operate the appliance without any water in the tank.

This product is equipped with a detachable Soft Water Activator (L), we recommend to replace when the

reminder

for Flush Clean & replacing Soft Water Activator

(F) is ashing.

Before starting ironing, please test your iron on an old towel to ensure that no residues inside the iron are

transferred to your garments. If necessary, wipe the soleplate with a slightly damp cloth.

3 Connect the steam iron to the mains supply. Select the ironing programme from the touch screen (E) on the

steam iron. The light indicator (C) on the iron will pulsate when preheating. When turned on for the rst time,

temporary vapours/odours may occur. The iron is equipped with an auto-steam function, which automatically

adjusts the steam output to the selected ironing programme supporting best ironing results.

4 As soon as the selected temperature has been reached, the lights indicator (C) is on permanently and the head-

light (D) turns on. Now the iron is ready to be used.

5 To activate the steam function, press and hold the steam on/o button (I) for 3-5 seconds.

6 For extra steam, press the steam jet button for one second.

Iron with extra steam: Press the steam buttons the same time for improved crease removal. When releasing the

buttons, use up the steam before putting the iron back on its heel.

Caution! Never release steam while the iron is standing on its heel.

Dry ironing: When not pressing steam buttons, the iron will be in dry mode.

7 Using

the spray mist. Pre-damp fabrics by pressing the spray button several times to release a ne mist; ensure

the tank is at least half full.

8 Steam hanging items.

The vertical steam function is ideal for curtains and suits. Hold the iron at a distance of

10-20 cm and press the steam jet button.

9 The iron is equipped with 3-way auto-o function. If the iron is left unattended on soleplate or the side, it au-

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Electrolux E8SI1-6DBM Renew 800 Bügeleisen zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Electrolux zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Electrolux E8SI1-6DBM Renew 800 Bügeleisen in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Electrolux Bügeleisen
Weitere Anleitungen von Bügeleisen

Häufig gestellte Fragen zu Electrolux E8SI1-6DBM Renew 800 Bügeleisen

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Electrolux EDB6120 4SafetyPrecision Bügeleisen

Bedienungsanleitung

Electrolux EDB6150 Bügeleisen

Bedienungsanleitung

Electrolux EDBS3370 Bügeleisen

Bedienungsanleitung

Electrolux E6ST1-8EG Refine 600 Bügeleisen

Bedienungsanleitung

Electrolux EDB5220 Bügeleisen

Bedienungsanleitung

Electrolux EDB1720 Bügeleisen

Bedienungsanleitung

Electrolux EDBT800 Bügeleisen

Bedienungsanleitung

Electrolux EDB5110PB Bügeleisen

Verwandte Kategorien