Bedienungsanleitung Bushnell Forge Fernglas

Bedienungsanleitung

2

Thank you for purchasing your new Bushnell® Forge™ binoculars.

This manual will help you optimize your viewing experience by explaining how you can adjust the binocular to your eyes,

and how to care for this instrument. Read the instructions carefully before using your binocular.

NEVER LOOK DIRECTLY AT THE SUN WITH YOUR BINOCULAR,

AS IT MAY CAUSE SERIOUS DAMAGE TO YOUR EYES

EYECUP ADJUSTMENT

Your Bushnell Forge binocular is fitted with eyecups (Fig. 1, next page) that provide a comfortable view of the full image

and help to exclude extraneous light. For use without eyeglasses or sunglasses, twist up the eyecups (Fig. 2). This will place

your eyes farther from the binocular’s ocular lenses, at the correct eye relief distance, allowing you to see the full field of

view.

IPD (INTERPUPILLARY DISTANCE) ADJUSTMENT

The spacing between the pupils of your eyes, called “interpupillary distance,” varies from person to person. To match your

binoculars to your IPD or “eye to eye” width:

1. Point them at a white wall or blank area of the sky. Hold the binoculars and view through them as you normally would.

Don’t worry about focus yet.

2. Grasp each side of the binocular firmly. Move the left and right sides closer together or farther apart (Fig. 3, next

page) until you see a single image with no shaded areas.

FOCUS AND DIOPTER ADJUSTMENT

1. First, adjust the eyecups and IPD as described in the previous sections.

2. Using the attached lens cap or your hand, cover the objective lens on the right side

of the binocular.

3. Using the center focus knob, focus on a distant object with fine detail (e.g., brick

wall, tree branches, etc) until it appears as sharp as possible when viewed through

the left side of the binocular.

4. Uncover the objective lens on the right side, and cover the left objective lens while

continuing to view the same object.

5. Rotate the diopter adjustment ring located directly below the right eyecup (Fig. 4),

NOT the center focus knob to bring the object into focus in the right side of the

binocular. Be sure to unlock the diopter ring first by pulling it up (see Fig. 4, 10x30

model does not have a locking diopter ring). Avoid over-turning or forcing the

diopter mechanism. If you are unable to bring the object into focus for your right

Fig. 4 Diopter Adjustment Ring

(10x42 model, unlocked)

A

C

B

D

E

F

G

PARTS GUIDE

* Located under cap on all models except 10x30.

Ocular Lens A

Center Focus Knob B

Twist-Up Eyecups C

Tripod Adapter Socket* D

Objective Lens E

Diopter Adjustment Ring F

Objective Lens Covers G

ENGLISH

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Bushnell Forge Fernglas zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Bushnell zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Bushnell Forge Fernglas in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Bushnell Ferngläser
Weitere Anleitungen von Ferngläser

Verwandte Produkte

Bedienungsanleitung

Bushnell StableView 181035 Fernglas

Bedienungsanleitung

Bushnell Trophy XLT Fernglas

Bedienungsanleitung

Bushnell NatureView Fernglas

Bedienungsanleitung

Bushnell Nitro Fernglas

Bedienungsanleitung

Bushnell Spectator Fernglas

Bedienungsanleitung

Bushnell Elite e2 Fernglas

Bedienungsanleitung

Bushnell Marine 137507 Fernglas

Bedienungsanleitung

Bushnell Legend Ultra HD Fernglas

Verwandte Kategorien