Bedienungsanleitung Bowers and Wilkins Formation Duo Lautsprecher

Bedienungsanleitung

4

ENGLISH

Switch On and Off

With all connections made, and the Bowers &

Wilkins Home app installed on your mobile device,

your Formation Duo are ready to be set up.

Formation Duo have no mains power switch and,

following a short start-up routine, will be operational

as soon as they are connected to mains power. They

will play an audio prompt when their startup routine

is complete.

When Formation Duo, that have not been previously

used, are rst switched on they will automatically

enter setup mode to enable their connection to your

home network and to any other available Formation

devices. Setup mode is indicated by a slow amber

pulse illumination of the speaker’s Form buttons

. Formation Duo will also appear in the Bowers

& Wilkins Home app as available for setup, either

on the initial app page, or after selecting ‘Add

Formation product’ from the app Settings page.

Your Formation Duo manage their operational state

and power consumption entirely automatically and

will switch to a power saving mode after twenty

minutes of inactivity. There is no need ever to switch

off your Formation Duo, however should you wish to

do so, simply disconnected them from mains power.

Your Formation Duo will retain their settings without

mains power.

You can restart each Formation Duo by a short

press and release of the reset buttons located on

their rear panels Pressing the button will switch the

Formation Duo off and on again. All settings will be

retained when your Formation Duo restart. You can

also restart your Formation Duo via the Bowers &

Wilkins Home app Settings page. The reset button is

illustrated in Diagram 3.

If you wish to reset your Formation Duo to their

default settings, press and hold each reset button

for ve seconds. On restart, your Formation Duo will

enter setup mode. All settings will be deleted when

your Formation Duo reset. You can also reset your

Formation Duo via the Bowers & Wilkins Home app

Settings menu.

Network Setup

• With your Formation Duo in setup mode, with their

Form button

illumination pulsing slowly amber,

launch the Bowers & Wilkins Home app on your

iOS or Android device. The app will guide you with

prompts though the setup process.

Note: Formation Duo employ a Bluetooth

connection to the device running the Bowers

& Wilkins Home app during the setup process.

Bluetooth signals have a relatively short range

and can be interrupted by room boundaries, so

we recommend that your Formation Duo and

Bowers & Wilkins Home app device remain in

close proximity during the setup process.

• The Bowers & Wilkins Home app will rst search

for Formation products in setup mode and display

a screen inviting the selection of one. Tap to select

your Formation Duo. If you have already set up a

Formation product and are adding an additional

one, select ‘Add Formation product’ from the app

Settings menu.

Diagram 3

Reset button

• The Bowers & Wilkins Home app will next invite

you to name the “space” in which your Formation

Duo are to be used. A list of default space names

is provided but you can also create your own.

When you have selected, or created, a space

name, the app will ask you to touch the Form

button

on the front of one Formation Duo to

conrm the selection.

• If a wireless network connection for your

Formation Duo is to be used, the next setup stage

will connect your Formation Duo to your home

WiFi network. The app will ask you to conrm

the correct WiFi network and ask you to input its

password. Alternatively, if your Formation Duo

are connected to your network router using an

Ethernet cable, this stage of the setup process will

be bypassed.

Note: If you already have other Formation

products connected to your WiFi network,

Formation Duo setup will not require you to

input the WiFi password.

• With WiFi network conguration, and space

selection complete, your Formation Duo are ready

for use. Your Formation Duo will play an audio

prompt to conrm successful setup.

Bluetooth Setup

You can connect your Formation Duo to a Bluetooth

enabled audio source device, such as a smartphone,

to play audio over Bluetooth. Your Formation Duo

must rst be “paired” with the Bluetooth audio

source device.

Once you have completed the Formation Duo

network setup, open the Bowers & Wilkins Home

app Settings page, and select the Formation Space

that you wish to pair a Bluetooth device with. Next

select ‘+ Pair a new device’ from the Bluetooth

menu and follow the app instructions to complete

pairing. Your Formation Duo will play an audio

prompt when pairing is complete and their Space will

become available to the paired Bluetooth device for

audio playback.

Note: Up to eight Bluetooth devices can be

simultaneously paired with each Formation

space, however devices will not connect and

play to paired spaces automatically.

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Bowers and Wilkins Formation Duo Lautsprecher zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Bowers and Wilkins zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Bowers and Wilkins Formation Duo Lautsprecher in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Bowers and Wilkins Lautsprecher
Weitere Anleitungen von Lautsprecher

Häufig gestellte Fragen zu Bowers and Wilkins Formation Duo Lautsprecher

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Bowers and Wilkins 203i Lautsprecher

Bedienungsanleitung

Bowers and Wilkins 803S Lautsprecher

Bedienungsanleitung

Bowers and Wilkins Zeppelin Air Lautsprecher

Bedienungsanleitung

Bowers and Wilkins CCM618 Lautsprecher

Bedienungsanleitung

Bowers and Wilkins 704 Lautsprecher

Bedienungsanleitung

Bowers and Wilkins LCR60 S3 Lautsprecher

Bedienungsanleitung

Bowers and Wilkins DM601 S3 Lautsprecher

Bedienungsanleitung

Bowers and Wilkins CCM626 Lautsprecher

Verwandte Kategorien