Bedienungsanleitung Black and Decker KR50CRE Schlagbohrmaschine

Bedienungsanleitung

4

ENGLISH

g. Use the power tool, accessories and tool bits etc.,

in accordance with these instructions and in the

manner intended for the particular type of power

tool, taking into account the working conditions

and the work to be performed. Use of the power tool

for operations different from those intended could result

in a hazardous situation.

5. Service

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

Additional safety instructions for impact drills

◆ Wear ear protectors with impact drills. Exposure to

noise can cause hearing loss.

◆ Use auxiliary handles supplied with the tool. Loss of

control can cause personal injury.

◆ Hold power tool by insulated gripping surfaces

when performing an operation where the cutting

tool may contact hidden wiring or its own cord.

Contact with a “live” wire will also make exposed metal

parts of the power tool “live” and shock the operator.

◆ Use clamps or another practical way to secure and

support the workpiece to a stable platform. Holding

the work by hand or against your body leaves it unstable

and may lead to loss of control.

◆ Before drilling into walls, floors or ceilings check for the

location of wiring and pipes.

◆ Avoid touching the tip of a drill bit just after drilling, as it

may be hot.

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

◆ This appliance is not intended for use by young or infirm

persons without supervision. Children must be supervised

to ensure they do not play with the appliance.

◆ If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Features

This tool includes some or all of the following features.

1. Variable speed switch

2. Lock-on button

3. Forward/reverse slider

4. Drilling mode selector

5. Chuck

6. Depth stop

7. Side handle

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Fitting the side handle and depth stop (fig. A)

◆ Turn the grip counterclockwise until you can slide the side

handle (7) onto the front of the tool as shown.

◆ Rotate the side handle into the desired position.

◆ Insert the depth stop (6) into the mounting hole as shown.

◆ Set the drilling depth as described below.

◆ Tighten the side handle by turning the grip clockwise.

Fitting a drill bit or screwdriver bit

Keyless chuck (fig. B)

◆ Open the chuck by turning the front part (8) with one hand

while holding the rear part (9) with the other.

◆ Insert the bit shaft (10) into the chuck and firmly tighten

the chuck.

Keyed chuck (fig. C)

◆ Open the chuck by turning the sleeve (11) counterclockwise.

◆ Insert the bit shaft (10) into the chuck.

◆ Insert the chuck key (12) into each hole (13) in the side of

the chuck and turn clockwise until tight.

Removing and refitting the chuck (fig. D)

◆ Open the chuck as far as possible.

◆ Remove the chuck retaining screw, located in the chuck,

by turning it clockwise using a screwdriver.

◆ Tighten an Allen key into the chuck and strike it with

a hammer as shown.

◆ Remove the Allen key.

◆ Remove the chuck by turning it counterclockwise.

◆ To refit the chuck, screw it onto the spindle and secure it

with the chuck retaining screw.

Use

Warning! Let the tool work at its own pace. Do not overload.

Warning! Before drilling into walls, floors or ceilings,

check for the location of wiring and pipes.

Selecting the direction of rotation (fig. E)

For drilling and for tightening screws, use forward (clockwise)

rotation. For loosening screws or removing a jammed drill bit,

use reverse (counterclockwise) rotation.

◆ To select forward rotation, push the forward/reverse

slider (3) to the centre position.

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Black and Decker KR50CRE Schlagbohrmaschine zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Black and Decker zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Black and Decker KR50CRE Schlagbohrmaschine in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Black and Decker Schlagbohrmaschinen
Weitere Anleitungen von Schlagbohrmaschinen

Häufig gestellte Fragen zu Black and Decker KR50CRE Schlagbohrmaschine

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Black and Decker KR85K Schlagbohrmaschine

Bedienungsanleitung

Black and Decker KR504 Schlagbohrmaschine

Bedienungsanleitung

Black and Decker CD714RE Schlagbohrmaschine

Bedienungsanleitung

Black and Decker KD352RE Schlagbohrmaschine

Bedienungsanleitung

Black and Decker KD455CRE Schlagbohrmaschine

Bedienungsanleitung

Black and Decker KR554CRES Schlagbohrmaschine

Bedienungsanleitung

Black and Decker KR420 Schlagbohrmaschine

Bedienungsanleitung

Black and Decker KR500 Schlagbohrmaschine

Verwandte Kategorien