Bedienungsanleitung Black and Decker GT510 Heckenschere

Bedienungsanleitung

5

ENGLISH

◆ For your safety, this tool is equipped with a double

switching system. This system prevents starting the tool

inadvertently and will only allow operation while holding

the tool with both hands.

Switching on and off

Switching on

◆ Take hold of the front handle (3) with one hand so that the

front handle switch (2) is pushed into the body of the tool.

◆ With the other hand, squeeze the trigger switch (1) to

start the tool.

Switching off

◆ Release the handle switch (2) or the trigger switch (1).

Warning! Never attempt to lock a switch in the on position.

Hints for optimum use

◆ Start by trimming the top of the hedge. Slightly tilt the

tool (up to 15° relative to the line of cut) so that the blade

tips point slightly towards the hedge (fig. C1). This will

cause the blades to cut more effectively. Hold the tool at

the desired angle and move it steadily along the line of cut.

The double-sided blade allows you to cut in either direction.

◆ In order to obtain a very straight cut, stretch a piece of

string along the length of the hedge at the desired height.

Use the string as a guideline, cutting just above it.

◆ In order to obtain flat sides, cut upwards with the growth.

Younger stems move outwards when the blade cuts

downwards, causing shallow patches in the hedge (fig. C2).

◆ Take care to avoid any foreign objects. Especially avoid

hard objects such as metal wire and railings, as these

could damage the blades.

◆ Regularly oil the blades.

Guidelines for trimming (UK & Ireland)

◆ Trim hedges and shrubs with seasonal leaves (new leaves

every year) in June and October.

◆ Trim evergreens in April and August.

◆ Trim conifers and other fast growing shrubs every six

weeks from May until October.

Guidelines for trimming (Australia & New Zealand)

◆ Trim hedges and shrubs with seasonal leaves (new leaves

every year) in December and March.

◆ Trim evergreens in September and February.

◆ Trim conifers and other fast growing shrubs every six

weeks from October until March.

Maintenance

Your tool has been designed to operate over a long period of

time with a minimum of maintenance. Continuous satisfactory

operation depends upon proper tool care and regular cleaning.

Warning! Before performing any maintenance, switch off and

unplug the tool.

◆ After use, carefully clean the blades. After cleaning, apply

a film of light machine oil to prevent the blades from rusting.

◆ Regularly clean the ventilation slots in your tool using a

soft brush or dry cloth.

◆ Regularly clean the motor housing using a damp cloth.

Do not use any abrasive or solvent-based cleaner.

◆ Make sure all switches are free of debris before and after

use.

Removing the guard (fig. A)

Warning! Remove the guard for servicing purposes only.

Always re-fit the guard after finishing servicing.

◆ Loosen the screws (9) and remove them.

◆ Slide the guard (4) off the tool.

Mains plug replacement (U.K. & Ireland only)

If a new mains plug needs to be fitted:

◆ Safely dispose of the old plug.

◆ Connect the brown lead to the live terminal in the new plug.

◆ Connect the blue lead to the neutral terminal.

Warning! No connection is to be made to the earth terminal.

Follow the fitting instructions supplied with good quality

plugs. Recommended fuse: 5 A.

Troubleshooting

If the tool does not operate correctly, check the following.

Fault Possible cause Action

Tool will not start. Blown fuse. Replace fuse.

Tripped RCD. Check RCD.

Mains lead not connected. Check mains

supply.

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you find one day that your Black & Decker product

needs replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product

available for separate collection.

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Black and Decker GT510 Heckenschere zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Black and Decker zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Black and Decker GT510 Heckenschere in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Black and Decker Heckenscheren
Weitere Anleitungen von Heckenscheren

Häufig gestellte Fragen zu Black and Decker GT510 Heckenschere

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Black and Decker GTC1843L Heckenschere

Bedienungsanleitung

Black and Decker BCSS18D1-QW Heckenschere

Bedienungsanleitung

Black and Decker GT7026 Heckenschere

Bedienungsanleitung

Black and Decker BEHTS451-QS Heckenschere

Bedienungsanleitung

Black and Decker GT331 Heckenschere

Bedienungsanleitung

Black and Decker GTC1445L Heckenschere

Bedienungsanleitung

Black and Decker GT440 Heckenschere

Bedienungsanleitung

Black and Decker MT18SSK Heckenschere

Verwandte Kategorien