Bedienungsanleitung Bionaire BAOF25M Ventilator

Bedienungsanleitung

PLEASE READ AND SAVE THESE

IMPORTANT INSTRUCTIONS

When using electrical appliances, basic safety

precautions should always be taken including

the following:

• Use the fan only for purposes described in the

instruction manual.

•To protect against electrical shock, do not

immerse the fan, plug or mains cable in water

or spray with liquids.

• Close supervision is necessary when any

appliance is used by or near children.

• Unplug from the electrical outlet when not in

use, when moving the fan from one location to

another, before putting on or taking off parts

and before cleaning.

•Avoid contact with any moving parts.

• Do not operate in the presence of explosive

and/or flammable fumes.

• Do not place the fan or any parts near an open

flame, cooking or other heating appliance.

• Do not operate any appliance with a damaged

mains cable, plug, after the appliance

malfunctions, or has been dropped/ damaged

in any manner.

• The use of attachments not recommended or

sold by the appliance manufacturer may

cause hazards.

• Do not use outdoors.

• Do not let the mains cable hang over the edge

of a table or counter, or come into contact with

hot surfaces.

•To disconnect from the electrical supply, grip

the plug and pull from the wall outlet. DO NOT

pull on the mains cable.

• Always use on a dry, level surface.

• Do not operate without the fan grills properly

in place.

• This product is intended for household use ONLY

and not for commercial or industrial applications.

• If the supply cord or plug is damaged, it must

be replaced by the manufacturer or its service

agent or a similarly qualified person in order to

avoid hazard.

• The appliance contains no user serviceable

parts and should the product suffer damage

or breakdown it must be returned to the

manufacturer or its service agent.

• Should the appliance stop working, first check the

fuse in the plug (UK only) or fuse/circuit breaker at

the distribution board is operating, before

contacting the manufacturer or service agent.

NOTE: Use caution when adjusting the tilt

angle of the fan head to ensure that your

fingers do not get caught.

MISSING A PART FOR YOUR FAN?

Please call 0800 052 3615 for assistance.

ASSEMBLY INSTRUCTIONS

See Fig. 1

A.upper body

B.Base

C.Screw/ Spring Washer / Flat Washer (4)

D.Mounting Nut

E.Motor Housing

F. Rear Grill

G.Motor Shaft

H.Notches

I. Prong

J. Fan Blade

K.Flat

L. Locking Screw

M.Grill Ring

N.Front Grill

O.Fixing Screw

P. Speed Control

Q.Oscillation Control

1. Fit the upper body (A) to the base (B). Align

the 4 screw holes in the base to the four holes

in the upper body. Fix securely with the 4 sets

of screw, spring washer and flat washer (C).

2. Unscrew the rear grill mounting nut (D) from

the motor housing (E). Position the rear grill

(F) over the motor shaft (G), making certain 2

notches (H) at the sides of the rear grill fit

over the corresponding prongs (I) on the

motor housing. Please make sure the rear grill

fits securely against the motor housing.

3. Secure the rear grill in its place using the rear

grill mounting nut. Turn this nut clockwise and

tighten firmly.

4. Remove the protective sleeve from the motor shaft.

5. Slide the fan blade (J), with the fixing screw

facing towards the rear grill, firmly onto the

motor shaft, aligning the screw with the flat (K)

on the motor shaft.

6. Position the locking screw (L) over the flat on

the motor shaft. Tighten the screw into the

side hole of the fan blade, against the motor

7. Loosely fit the grill ring (M) to the front grill

(N). Position the fixing screw (O) at the bottom

of the grill with reference to the Bionaire

®

logo.

The grill ring has two grooves. Locate the

front grill to one of these grooves leaving the

other groove free to attach to the rear grill.

Only tighten the fixing screw enough to hold

the grill ring in place.

8. Centre the front grill by aligning the Bionaire

®

logo on the logo plate so that it is horizontal

and parallel with the floor. Then, holding the

front grill against the rear grill, push the black

grill ring into place at the top and bottom of

the fan. (Push directly on the black grill ring,

ENGLISH

2

not on the grills themselves). Finish securing

the grill ring in the same manner until both

grills are joined underneath the black ring.

9. Tighten the screw.

OPERATING INSTRUCTIONS (See Fig. 1)

1. Set the fan base on a dry level surface.

2. Make sure the Speed Control is in the OFF

(0) position. Speed Control (P) is located on

the top of the fan motor housing.

3. Plug the cord into a suitable outlet.

4. The SPEED is adjusted by turning the Speed

Control to the desired setting:

0 - Off

I - Low

II - Med

III - High

ADJUSTMENT

Tilt adjustment

To change the tilting angle of the fan head,

simply move the fan head to the desired angle.

Oscillation adjustment

The OSCILLATION control (Q) is located on the

top of the fan motor housing. To start oscillation,

push the control knob down. To stop oscillation,

pull the control knob up.

CLEANING AND MAINTENANCE

• Always unplug the fan before cleaning or

disassembly.

• Do not allow water to drip on or into the fan

motor housing.

FAN STORAGE

It is important to keep the fan in a safe, dry location.

•We recommend using the original (or

appropriately sized) box.

FITTING A REPLACEMENT PLUG

FOR U.K. AND IRELAND ONLY

If the plug is not suitable for the socket outlets in

your home, it can be removed and replaced by a

plug of the correct type. Please refer to "Installation

of a plug" below.

Installation of a plug Applicable to U.K.

and Ireland.

WARNING - THIS APPLIANCE MUST BE

EARTHED.

The wires in the mains lead are coloured as such:

GREEN AND YELLOW - EARTH

BROWN - LIVE

BLUE - NEUTRAL

Please note that the colour of these mains wires

may not correspond with the colour markings

that identify the terminals in your plug.

Please proceed as follows:

The wire which is coloured GREEN AND YELLOW

must be connected to the terminal which is marked

with the letter 'E' or by the earth symbol or

coloured GREEN or GREEN AND YELLOW.

The BROWN coloured wire must be connected

to the terminal, which is marked with the letter

"L" or is coloured RED.

The BLUE coloured wire must be connected to

the terminal, which is marked with the letter "N"

or is coloured BLACK.

NOTE: If the terminals in the plug are not marked

or if you are unsure or in doubt about the installation

of the plug please contact a qualified electrician.

If a 13A 3-pin plug is fitted, it must be an ASTA

approved plug, conforming to BS1363 standard.

Replacement 3A fuses must be BSI or ASTA

BS1362 approved.

GUARANTEE

PLEASE KEEP YOUR RECEIPT AS THIS WILL

BE REQUIRED FOR ANY CLAIMS UNDER THIS

GUARANTEE.

• This product is guaranteed for 3 years.

• In the unlikely event of breakdown, please take

it back to the place of purchase, with your till

receipt and a copy of this guarantee.

• The rights and benefits under this guarantee

are additional to your statutory rights which

are not affected by this guarantee.

• Holmes Products Europe undertakes within

the specific period, to repair or replace free of

charge, any part of the appliance found to be

defective provided that:

• We are promptly informed of the defect.

• The appliance has not been altered in any

way or subjected to misuse or repair by a

person other than a person authorised by

Holmes Products Europe.

• No rights are given under this guarantee to a

person acquiring the appliance second hand

or for commercial or communal uses.

• Any repaired or replaced appliance will be

guaranteed on these terms for the remaining

portion of the guarantee.

THIS PRODUCT IS MANUFACTURED TO

COMPLY WITH THE E.E.C. DIRECTIVES

73/23/EEC, 89/336/EEC AND 98/37/EEC.

3 amp

3

K

C

B

A

Q

M

O

N

D

P

G

L

F

J

E

H

I

BAOF25M/BAOF25W

BAOF30M/BAOF30W/BAOF30B

Fig.1

BAOF25M/W/30M/W/BI06MLM1.qxd 11/2/06 3:43 PM Page 4

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Bionaire BAOF25M Ventilator zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Bionaire zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Bionaire BAOF25M Ventilator in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Bionaire Ventilatoren
Weitere Anleitungen von Ventilatoren

Häufig gestellte Fragen zu Bionaire BAOF25M Ventilator

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Bionaire BAOF25W Ventilator

Bedienungsanleitung

Bionaire BT14 Ventilator

Bedienungsanleitung

Bionaire BAOF30B Ventilator

Bedienungsanleitung

Bionaire BAC19 Ventilator

Bedienungsanleitung

Bionaire BASF40LM Ventilator

Bedienungsanleitung

Bionaire BT150R Ventilator

Bedienungsanleitung

Bionaire BASF40W Ventilator

Bedienungsanleitung

Bionaire BAOF30W Ventilator

Verwandte Kategorien