Bedienungsanleitung Beamz Rage 1500 Nebelmaschine

Bedienungsanleitung

4

DISPLAY

Via the Menu key, you can adjust the desired settings. After pressing the menu, the display shows the following settings:

1. Man Vol Out xxx%.

Adjust the manual volume output within the range of 0% to 100% by means

of the Up/Down keys.

2. Interval Set xxxS

Adjust the interval between each fog emission within the range of 1 to 100S

by means of the Up-/Down keys.

3. Duration Set xxxS

Adjust the duration of each fog emission within the range of 1 to 100S.

4. Volume Out xxx%

Adjust the volume output during the timer function within the range of 0-

100%

5. DMX 512 #xxx

Adjust the DMX address for DMX control.

6. Wind For Class xx

NO FUNCTION for this model.

7. Angel Set xx%

NO FUNCTION for this model.

8. LED Pro Set xx

Adjust the LED program within the range of 0 to 11.

9. LED Spe xxx

Adjust the LED speed/strobe/fade of the LED program mode

10. Temper Max:xxx

Adjust the maximum heating temperature of the heating element, adjustable between 285° - 330°C.

11. LED Sync Set Yes/No

Adjust the LED mode. Yes=LEDs work together with the smoke output, NO=LEDs are always on.

TIMER CONTROL

Press the Timer key to activate the timer function. The display shows the adjusted interval and the device counts the seconds

down to "0". After that, the fog emission is triggered at the volume adjusted under "Volume Out". The duration depends on the

settings adjusted under "Duration Set". If you wish to deactivate the timer function, press the Timer key once more.

Manual control (locked)

Press the Lock button for immediate triggering of the fog emission at the volume adjusted under "Man Volume". Press the lock

button more in order to stop the fog emission.

Manual control (100% output)

Press the Manual key for immediate triggering of the fog emission at 100 % volume. Let the Manual key loose in order to stop

the fog emission.

DMX-512 CONNECTION

If you are using a standard DMX controller, you can connect the DMX-output of the controller directly to the DMX-

input of the first unit in a DMX-chain. Always connect the output of one unit with the input of the next unit until all

units are connected. If you use a controller with 5 pin DMX connection you will need to use a 5-pin to 3-pin adapter.

At the last fixture, the DMX cable has to be terminated. Solder a 120 Ohm resistor between signal (-) and signal (+)

into a 3-pin XLR connector and plug this into the DMX output of the last fixture in the chain.

Address Setup:

Press the MODE button a number of times until Add appears on the display, with the UP / DOWN buttons the start address may

be set. The start address is defined as a first channel to which the machine will respond to. Check that there are no overlapping

channels used!

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Beamz Rage 1500 Nebelmaschine zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Beamz zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Beamz Rage 1500 Nebelmaschine in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für BeamZ Nebelmaschinen
Weitere Anleitungen von Nebelmaschinen

Verwandte Produkte

Bedienungsanleitung

BeamZ S900 Nebelmaschine

Bedienungsanleitung

BeamZ 160.491 S1200 MKII Nebelmaschine

Bedienungsanleitung

Beamz Rage 1000 Nebelmaschine

Bedienungsanleitung

BeamZ S2000 DMX Nebelmaschine

Bedienungsanleitung

BeamZ S700 Nebelmaschine

Bedienungsanleitung

BeamZ 160.487 S900 Nebelmaschine

Bedienungsanleitung

BeamZ ICE 1800 Nebelmaschine

Bedienungsanleitung

BeamZ S500 Nebelmaschine

Verwandte Kategorien