Bedienungsanleitung AEG 8060D Dunstabzugshaube

Bedienungsanleitung

ENGLISH

DESCRIPTION

This appliance consists of a hood and a telescopic flue which must be applied to the upper part of the hood in order to cover

the draft pipe. The appliance can be a filtering version one, a ducting version one or with an external motor.

In the Filtering version (Fig.1), the air and vapours conveyed by the appliance are depurated by charcoal filters and

recirculated around the room through the side venting ducts of the flue. ATTENTION: When using the filtering version, two

charcoal filters must be installed plus an air switch. Positioned in the upper part of the flue, this allows the air to be

recirculated throughout the room (Fig.1A). In the Ducting version (Fig.2), cooking vapours and odours are conveyed

straight outside by a disposal duct which passes through the wall/ceiling. Use of charcoal filters is therefore unnecessary.

In the version with an External motor (Fig.3), the appliance must be connected to an ducting apparatus/motor which works

on its own using the appliance as a union for the air to be scavenged. Use only motors proposed in the original

catalogue.

INSTALLATION

Remove the anti-grease filters before proceeding with the assembly instructions. This will make the appliance easier

to handle. To remove the anti-grease filters (Fig. 4): this is carried out by pushing the relative catch inwards and turning

it downwards until it disengages from the supports. Proceed with these instructions in reverse when refitting the filters.

Wall fixing with brackets : Make all the necessary holes on the wall using the relative boring template. Apply the

supplied brackets to the wall using the relative screws and screw anchors (Fig. 5). Before installing the hood, check that

the bracket fixing screws (Fig.5A) have been sufficiently slackened to allow the hood itself to be fitted in place.

Now fit on the hood using the relative rectangular slots situated at the rear of the appliance (Fig. 5). Since these coupling

slots are dimensionally larger than the brackets, the horizontal position of the appliance can be adjusted by sliding to the

right or left in order to align the equipment. The appliance can be regulated in height by means of the relative bracket adjuster

screws (Fig. 5B). Once having regulated the equipment, fix everything in place by tightening screws A (Fig.5) and inserting

safety screws C (Fig. 5).

Installation with the rear panel : The rear metal panel must be fixed to the wall in the upper part of the hob (Fig.6).

Rest the lower edge of the panel behind the hob and fix the upper edge to the wall by means of the two holes in the panel

itself, inserting the supplied screws and screw anchors (Fig. 6A). The appliance should be fixed to the rear panel in the same

way as wall fixing, using the supplied hood brackets and the screws and screw anchors supplied with the panel (Fig. 6B).

Fixing the decorative pipe : The following operations are essential for assembly: – Install the wiring system within

the decorative flue. – Prepare the air venting hole if your appliance is to be installed in the ducting version or in the version

with an external motor.

In the Ducting version and in the version with an External motor, to get optimal conditions the air venting pipe should:

– be as short as possible. – have the lowest number of bends (max bende angle: 90°). – be made of material approved

by local authorities (according to the State). – have its inner side as regular and smooth as possible.

It is moreover recommended to avoid drastic changes of pipe cross section (recommended diameter: 150 mm).

Using the supplied screws and screw anchors, fix the upper flue bearing bracket to the ceiling and/or wall, checking

that it is aligned with the hood (Fig. 7). Prepare the decorative flues, remembering that their final position must be that

illustrated in Fig.8. The air disposal gratings in the filtering version must be positioned in the upper part. For the ducting

version turn upside down the upper flue so that the air disposal gratings are downwards.

Ducting version and version with an external motor : Adjust the flue height and fix the relative screws (Fig.8). Connect the

hood flange to the outlet on the wall/ceiling by means of a suitable pipe.

Concerning the version with external motor only (Fig. 9): make the electrical connection between the hood and the external

motor by means of the proper terminal board: take off the cable clamp A and the cover B of the wiring junction box. Fix the

connection cable of the motor onto the terminal board C. Reassemble the cable clamp A and the cover B of the junction

box. The other end of the cable must be fixed onto the terminal board of the external motor.

Make the electrical connection of the hood by means of the power supply cable. Insert the decorative flue, fixing it at the

top and bottom through holes A and B (Fig.10).

Filtering version : Fix the switch fitting (Fig.11) to the upper flue using the relative screws. Connect a suitable hose to the

switch fitting. Fix the decorative flue to the ceiling bracket by means of the relative screws B (Fig.10). Keeping the lower

flue temporarily raised, connect the draft pipe to the hood flange. Make the electrical connection of the hood by means of

the power supply cable. Allow the decorative flue to lower in position and fix it to the flange support by means of supplied

screws A (Fig.10).

OPERATION

The hoods are provided with the following type of controls:

Controls of Fig. 12: A = light switch. B = first speed motor ON/OFF switch. C = second speed switch. D = third speed

switch. E = warning light.

Controls of Fig. 13: Switch A : LIGHT; position 0: light off; position 1: light on. Cursor B: MOTOR SPEED; used

to regulate the operative speed of the motor. Switch C: MOTOR; position 0: motor off; position 1: motor on. Warning

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr AEG 8060D Dunstabzugshaube zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, AEG zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres AEG 8060D Dunstabzugshaube in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für AEG Dunstabzugshauben
Weitere Anleitungen von Dunstabzugshauben

Häufig gestellte Fragen zu AEG 8060D Dunstabzugshaube

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

AEG DD9691-M Dunstabzugshaube

Bedienungsanleitung

AEG DGK6681HM Dunstabzugshaube

Bedienungsanleitung

AEG DPB3632S Dunstabzugshaube

Bedienungsanleitung

AEG DBE5981HR Dunstabzugshaube

Bedienungsanleitung

AEG DU4361-D Dunstabzugshaube

Bedienungsanleitung

AEG 7509D-W Dunstabzugshaube

Bedienungsanleitung

AEG DI9966-M Dunstabzugshaube

Bedienungsanleitung

AEG DM8400-M Dunstabzugshaube

Verwandte Kategorien