Bedienungsanleitung XZENT XT10RVC Rückfahrkamera

Benötigen Sie ein Bedienungsanleitung für Ihren XZENT XT10RVC Rückfahrkamera? Unten können Sie das PDF-Bedienungsanleitung kostenlos auf Deutsch ansehen und herunterladen. Für dieses Produkt gibt es derzeit 0 häufig gestellte Fragen, 1 Kommentar und 0 Stimmen. Wenn dies nicht das von Ihnen gewünschte Bedienungsanleitung ist, kontaktieren Sie uns bitte.

Ist Ihr Produkt defekt und bietet die Bedienungsanleitung keine Lösung? Gehen Sie zu einem Repair Café, wo es gratis repariert wird.

Bedienungsanleitung

Loading…

Please read this documentation carefully before you attempt to install and use this rear view camera model. Note that the given info
applies only to this particular model – installation by professionals is always highly recommended.
Do not damage tubing or wiring when drilling holes. Arrange the wiring so it is not crimped or pinched by sharp metal edges.
1. Mounting
The XZENT XT10RVC rear view camera can be mounted on almost any type of vehicle. Depending on the dimensions and shape of the
target vehicle, the camera may be installed in different locations.
The XT10RVC camera can be mounted in two different ways:
· Using the chrome plated bracket with the mounting ears (a)
· Flush-mount in the back door or the rear bumper (b)
For SUV and light truck vehicles, the ideal mounting height of the XT10RVC is in,
or right below the rear bumper – while for limousine and coupé type vehicles, a
higher position, just above the license plate holder will give better results.
After installation, the camera picture may be adjusted by untightening the lens
holding ring counterclockwise. Now you can turn the camera around its line of
sight in order to finetune the position. Instant success is guaranteed, if somebody
else is simultaneously checking the image position on the monitor.
Important: Once you are satisfied with the adjustments fasten the lens holder hand-tight, in order to keep the camera waterproof.
2. Electrical Connection
Most Navi-/Moniceivers feature a separate input to sense the state of the the reverse gear light (not to mix up with the taillights!).
Modern vehicle specific units (like the ZENEC E>GO series) do not even need that input signal, cause their design allows them to extract
this information directly from the vehicles CAN - Bus.
Please consult the manual and/or wiring of your specific device about how it switches to an alternative video input.
Use the included connection cables exclusively. Altering or replacing them, will void your warranty.
*Yellow RCA: Video Out of reverse cam, goes to RVC Video-In of Navi-/Moniceiver
*Red wire: Power connect to +12V switched by ignition key
3. Technical Specifications
This product and the accompanying manual is subject to change without notice
Image device 8.4 mm/0.33’’ CMOS Sensor
Sensor resolution 510 x 492 pixels
TV-system NTSC
IP Protection Rating IP67
Resolution of video 420 TV lines
Automatic Gain Control Yes
Autom. Backlight Compensation Yes
Signal/Noise ratio 48 dB
Minimum illumination 1 Lux
Video output 75 Ohms/1Vp-p
Power supply 12 V
Current consumption 70 mA
Operating temperature -20 ºC - 65 ºC
Viewing angle 170º
XT10RVC Rear View Camera Instructions
ab
Environmental Reference
If at any time in the future you should need to dispose
this product please note that waste electrical products
should not be disposed with the household waste.
Please recycle where facilities exist. Check with your
local authorities or retailer for recycling advice (Waste
Electrical and Electronic Equipment Directive).
Black wire GND 0V
*Red wire +12V
*Yellow RCA
Manual:Layout 1 21.07.2010 11:01 Uhr Seite 1
Download Bedienungsanleitung auf Deutsch (PDF, 0.55 MB)
(Denken Sie an die Umwelt und drucken Sie diese Bedienungsanleitung nur aus, wenn es unbedingt nötig ist)

Loading…

Bewertung

Teilen Sie uns mit, was Sie über die XZENT XT10RVC Rückfahrkamera denken, indem Sie eine Produktbewertung verfassen. Möchten Sie Ihre Erfahrungen mit diesem Produkt teilen oder eine Frage stellen? Hinterlassen Sie einen Kommentar am Ende dieser Seite!
Sind Sie mit XZENT XT10RVC Rückfahrkamera zufrieden?
Ja Nein
Seien Sie die erste Person, die dieses Produkt bewertet
0 Bewertungen

Diskutieren Sie über dieses Produkt mit

Hier können Sie uns Ihre Meinung zu XZENT XT10RVC Rückfahrkamera mitteilen. Wenn Sie eine Frage haben, lesen Sie zunächst das Bedienungsanleitung sorgfältig durch. Die Anforderung eines Bedienungsanleitung kann über unser Kontaktformular erfolgen.

Jenny Stewart 06-01-2023
Ich habe einen Fiat Ducato Autotrail V660s mit einem XZent X-F270 Infosystem. Als ich den Camper zum ersten Mal abholte, war ich mir sicher, dass das Bild Gitterlinien zur Feindführung zeigte. habe sie aber seitdem nicht mehr gefunden. Jede Hilfe wäre willkommen. da ich online nichts finden kann Betrachten Sie Jenny

Antworten | Das war hilfreich (0) (Übersetzt von Google)

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr XZENT XT10RVC Rückfahrkamera zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, XZENT zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres XZENT XT10RVC Rückfahrkamera in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Marke XZENT
Modell XT10RVC
Kategorie Rückfahrkameras
Dateityp PDF
Dateigröße 0.55 MB

Alle Anleitungen für XZENT Rückfahrkameras
Weitere Anleitungen von Rückfahrkameras

Bedienungsanleitung XZENT XT10RVC Rückfahrkamera

Verwandte Produkte

Verwandte Kategorien