Bedienungsanleitung Prophete 0526 Fahrradcomputer

Bedienungsanleitung

INSTRUCTIONS MANUAL

5.3 Setting the clock

Keep pressing the mode key until the clock symbol appears in the display. Then keep

the mode key pressed down for approx. 8 seconds until the hour display blinks. Then

press the mode key again to increase the hour value. When you have the hour value

desired keep the mode key pressed down for approx. 3 seconds, and the minute

display will start blinking. Repeat the process described above for the hour display

to set the minute value desired. To save the desired time setting, keep the mode key

pressed down for approx. 8 seconds.

You have now completed all your settings and the bicycle computer is ready for use.

5.4 Bicycle computer check

To check that the bicycle computer and sensor have been correctly installed, press

the mode key to activate the display. Ensuring that the computer is fi rmly attached

to the computer mount, turn the front wheel of your bicycle and the speed will

be displayed.

5.5 Restart/Reset

To reset entered and saved data, you have to keep pressing the mode key until the

ODO display appears. Then keep the mode key pressed down for approx. 6 seconds,

and repeat the settings (refer to section 5.1).

5.6 Automatic starting/stopping of readings

You don’t have to switch on the bicycle computer each time before use (in time

display). When you start riding, all the readings will automatically start until the

bicycle comes to rest. The bicycle computer will automatically switch to power saving

mode, if the bicycle is not in use for a period longer than 10 minutes.

6. MODES/FUNCTIONS

After starting up the bicycle computer, the display will show the speed and time.

Speed: is continuously calculated and updated, and shown in the upper part of the

display. Measuring range: 0.1 – 99.9

Press the mode key to switch between the following modes:

• DO (total distance travelled):

All kilometres (miles) travelled will be stored.

Maximum memory: 19,999.9

• MAX (maximum speed):

The maximum speed attained will be stored.

Maximum memory: 199.9

• AVG (average speed)

Maximum memory: 99.9

The “ERR” symbol will appear, if TM exceeds 100 hrs or DST exceeds 1,000 km.

• The clock symbol (time)

• SCAN (Scan function):

Rolling function display: keep pressing the mode key until you reach the SCAN

mode. The word SCAN will appear in the display. In this mode, the DST, time, TM,

AVG, MAX and ODO functions will automatically be displayed in approx. 4

second intervals.

• TM (journey time / journey chronometer):

Automatically started when journey begins.

Maximum memory: 19 hrs 59 min 59 sec

• DST (journey distance):

Automatically started when journey begins.

Maximum memory: 999.9

6.1 Resetting the route data (DST, TM, AVG, MAX) to zero

Press the mode key to display (DST). Then press the mode key again and keep

pressed down for approx. 3 seconds. The 4 route data readings (journey distance,

journey time, average speed and maximum speed) will be reset to zero.

7. REPLACING THE BATTERIES

7.1 Bicycle computer

Unscrew the lid of the battery compartment (located on the underside of the bicycle

computer) using a coin. Insert the battery so that the plus pole (+) is visible. Replace

the lid and screw shut. After the batteries are inserted, all the settings must be

repeated (refer to section 5.2 Setting the tyre size).

10. WARRANTY PROVISIONS

Bicycle computer article no.: 0526

This bicycle computer is provided with a 2-year warranty. The warranty period starts

from the date of purchase (purchase receipt, proof of purchase). During the warranty

period, address any complaints you may have to your dealer or the service address

provided below. During this period we will correct free of charge all faults caused by

material defects or malfunctioning.

Batteries, defects caused by improper handling, a fall, impact and the like are

excluded from the warranty. Please note that the warranty period is not affected by

any repair or replacement. The 2-year warranty period starting from the purchase

date shall remain in effect.

After the warranty period has expired, you will still be able to send the defective

bicycle computer to the service address provided below to be repaired. Any repairs

caused after the warranty period has expired are, however, subject to charge. After

prior telephone contact, please send your properly packaged bicycle computer (with

your purchase receipt) with suffi cient postage to the following address:

Prophete GmbH u. Co. KG

Lindenstrasse 50

D-33378 Rheda-Wiedenbrück

Phone: +49 (0) 5242 4108-59

Fax: +49 (0) 5242 4108-73

Email address: [email protected]

Website: www.prophete.de

5. INITIAL OPERATION

We recommend that you fi rst carefully read the operating instructions, before using

the bicycle computer the fi rst time.

5.1 Switching on the bicycle computer for the fi rst time

Before you can use the bicycle computer for the fi rst time, you must make a few

settings. Insert the battery (refer to section 7.1). If the battery is already inserted, or

you want to change any settings, press the reset key on the back of the computer.

This will automatically test the LCD segments. Press the mode key to end the test.

Now “KM/h” will blink. If you want to change to M/h press the mode key. Then keep

the mode key pressed down until the fi rst digit for the tyre size setting blinks (refer

to table 5.2). You can now increase the number by briefl y pressing the mode key.

When the value you want appears, hold the mode key down – the next digit will

then start blinking. Repeat this process until you have set all the numbers correctly.

You now have another opportunity to set kilometres or miles – briefl y press the

mode key to set miles. Keep the mode key pressed down for approx. 3 seconds to

save your setting.

5.2 Setting the tyre size

After inserting the battery (section 7.1) or changing the tyre size, you have to repeat

the procedure described in section 5.1.

Determining the tyre size: mark the front tyre and the ground at the same spot, or

alternatively, use the valve for orientation. Rotate the wheel through one revolution

and measure the distance covered in cm. This is your entry value. Or alternatively,

use the table below for orientation.

8. DECLARATION OF CONFORMITY

It is hereby confi rmed that the designated product conforms to the fundamental

requirements of the following European guidelines:

2004/108/EG EMV guideline

European Parliament and Council guideline from 15.12.2004

2006/95/EG Low voltage guideline

European Parliament and Council guideline from 12.12.2006

The conformity of this product with the guidelines is established by its full compli-

ance with the harmonised and non-harmonised standards.

½

9. DESCRIPTION OF ERRORS

In the event of an error occurring, please check the following points fi rst, before you

make any complaint about the bicycle computer.

Speed not displayed

• Check for correct magnet/sensor alignment

• Check batteries

• The display will not work if the batteries are too weak

Incorrect speed reading, or speed is displayed when not in motion,

or maximum speed display is too high

• Check that you have the right setting for the tyre size

• Check that you have the right km/miles setting

• Check that magnet and sensor are correctly positioned

• It is possible that unknown atmospheric or RF disturbances, atmospheric or

radio interferences, high-voltage power lines, railway lines etc. may also cause

an incorrect speed display.

No display (blacked out)

Too high temperature, or display is exposed to direct sunlight. Display will return to

normal when cooled off.

Display shows erratic numbers

Remove bicycle computer battery and reinsert.

No display

• Check the batteries

• Check that the batteries are inserted the right way round (+/-).

BICYCLE COMPUTER

OPERATING INSTRUCTIONS

Art. No.: 0526 | 8 Functions

0526_layout_en.indd 10526_layout_en.indd 1 10.08.2011 8:49:13 Uhr10.08.2011 8:49:13 Uhr

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Prophete 0526 Fahrradcomputer zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Prophete zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Prophete 0526 Fahrradcomputer in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Prophete Fahrradcomputer
Weitere Anleitungen von Fahrradcomputer

Häufig gestellte Fragen zu Prophete 0526 Fahrradcomputer

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Prophete 7038 Fahrradcomputer

Bedienungsanleitung

Prophete 0531 Fahrradcomputer

Bedienungsanleitung

Prophete 0528 Fahrradcomputer

Bedienungsanleitung

Prophete 0519 Fahrradcomputer

Bedienungsanleitung

Prophete 0512 Fahrradcomputer

Bedienungsanleitung

Prophete 0516 Fahrradcomputer

Bedienungsanleitung

Prophete 0523 Fahrradcomputer

Bedienungsanleitung

Prophete 0511 Fahrradcomputer

Verwandte Kategorien