Bedienungsanleitung Indesit DFP 2631M Geschirrspüler

Bedienungsanleitung

EN

2

Installation

Keep this instruction manual in a safe place for future

reference. If the appliance is sold, given away or moved, please

ensure the manual is kept with the machine, so that the new

owner may benefit from the advice contained within it.

Please read this instruction manual carefully: it contains

important information regarding the safe installation, use and

maintenance of the appliance.

If the appliance must be moved at any time, keep it in an

upright position; if absolutely necessary, it may be tilted onto its

back.

This appliance is intended to be used in household and similar

applications such as:

- staff kitchen areas in shops, offices and other working

environments;

- farm houses;

- by clients in hotels, motels and other residential type

environments;

- bed and breakfast type environments.

Positioning and levelling

1. Remove the appliance from all packaging and check that it has

not been damaged during transportation.

If it has been damaged, contact the retailer and do not proceed

any further with the installation process.

2. Check the dishwasher by placing it so that its sides or back

panel are in contact with the adjacent cabinets or even with the

wall. This appliance can also be recessed under a single worktop

*

(

see the Assembly instruction sheet

).

3. Position the dishwasher on a level and sturdy floor. If the floor

is uneven, the front feet of the appliance may be adjusted until it

reaches a horizontal position. If the appliance is levelled correctly,

it will be more stable and much less likely to move or cause

vibrations and noise while it is operating.

4

*. Adjust the height of the rear foot from the front of the appliance

on the central lower part of the dishwasher, turning a hexagonal

spanner (red color) with an opening of 8 mm in a clockwise

direction to increase the height or in an anticlockwise direction to

decrease the height.

Connecting the water and electricity

supplies

Connection to the water and electricity supplies should only

be performed by a qualified technician.

The dishwasher should not stand on top of the water hoses

or the electricity supply cable.

The appliance must be connected to the water supply network

using new hoses.

Do not use old hoses.

The water inlet and outlet hoses and the electricity supply cable

may be positioned towards the right or the left in order to achieve

the best possible installation.

Connecting the water inlet hose

• To a suitable cold water connection point: before attaching the

hose, run the water until it is perfectly clear so that any impurities

that may be present in the water do not clog the appliance;

after performing this operation, screw the inlet hose tightly

onto a tap with a ¾ gas threaded connection.

• To a suitable hot water connection point: your dishwasher

may be supplied with hot water from the mains supply (if you

have a central heating system with radiators) provided that it

does not exceed a temperature of 60°C.

Screw the hose to the tap as described for connection to a

cold water supply.

If the inlet hose is not long enough, contact a specialist store

or an authorised technician (

see Assistance

).

The water pressure must be within the values indicated in the

Technical data table (

see adjacent information

).

The hose should not be bent or compressed.

Connecting the water outlet hose

Connect the outlet hose (without bending it) to a drain duct

with a minimum diameter of 4 cm.

The outlet hose must be at a height ranging from 40 to 80

cm from the floor / surface where the dishwasher rests (A).

Before connecting the water outlet hose to the sink drain,

remove the plastic plug (B).

Anti-flooding protection

To ensure floods do not occur, the dishwasher:

- is provided with a special system which blocks the water supply

in the event of anomalies or leaks from inside the appliance.

Some models are also equipped with the supplementary safety

device

New Acqua Stop

*, which guarantees anti-flooding

protection even in the event of a supply hose rupture.

WARNING: HAZARDOUS VOLTAGE!

Under no circumstance should the water inlet hose be cut as it

contains live electrical parts.

* Only available in selected models.

Bewertung

Mehr zu diesem Bedienungsanleitung

Wir verstehen, dass es schön ist, ein gedrucktes Bedienungsanleitung für Ihr Indesit DFP 2631M Geschirrspüler zu haben. Sie können das Bedienungsanleitung jederzeit von unserer Website herunterladen und selbst ausdrucken. Wenn Sie ein Originalhandbuch wünschen, empfehlen wir Ihnen, Indesit zu kontaktieren. Möglicherweise können sie ein Originalhandbuch bereitstellen. Suchen Sie das Bedienungsanleitung Ihres Indesit DFP 2631M Geschirrspüler in einer anderen Sprache? Wählen Sie auf unserer Homepage Ihre bevorzugte Sprache und suchen Sie nach der Modellnummer, um zu sehen, ob wir sie verfügbar haben.

Spezifikationen

Alle Anleitungen für Indesit Geschirrspüler
Weitere Anleitungen von Geschirrspüler

Häufig gestellte Fragen zu Indesit DFP 2631M Geschirrspüler

Unser Support-Team sucht nach nützlichen Produktinformationen und beantwortet Ihre häufig gestellten Fragen. Sollte Ihnen ein Fehler bei den häufig gestellten Fragen auffallen, teilen Sie uns dies bitte anhand unseres Kontaktformulars mit.

Verwandte Produkte

Bedienungsanleitung

Indesit TDFP 57BP96 EU Geschirrspüler

Bedienungsanleitung

Indesit DIS 14 Geschirrspüler

Bedienungsanleitung

Indesit DFO 3C26 Geschirrspüler

Bedienungsanleitung

Indesit IDL 6021 Geschirrspüler

Bedienungsanleitung

Indesit IDL 63 S NL Geschirrspüler

Bedienungsanleitung

Indesit D 64 (EU) Geschirrspüler

Bedienungsanleitung

Indesit DFG 262 EU Geschirrspüler

Bedienungsanleitung

Indesit DIFP 18B1 A EU Geschirrspüler

Verwandte Kategorien